3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCF8574N
Texas Instruments · I/O Expanders · PDIP-16
PCF8574N from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input 0; connect directly to VCC or ground, and pullup resistors are not needed. |
| 2 | A1 | input | Address input 1; connect directly to VCC or ground, and pullup resistors are not needed. |
| 3 | A2 | input | Address input 2; connect directly to VCC or ground, and pullup resistors are not needed. |
| 4 | P0 | bidirectional | P-port input/output with a push-pull design structure. |
| 5 | P1 | bidirectional | P-port input/output with a push-pull design structure. |
| 6 | P2 | bidirectional | P-port input/output with a push-pull design structure. |
| 7 | P3 | bidirectional | P-port input/output with a push-pull design structure. |
| 8 | GND | power_in | Ground. |
| 9 | P4 | bidirectional | P-port input/output with a push-pull design structure. |
| 10 | P5 | bidirectional | P-port input/output with a push-pull design structure. |
| 11 | P6 | bidirectional | P-port input/output with a push-pull design structure. |
| 12 | P7 | bidirectional | P-port input/output with a push-pull design structure. |
| 13 | INT | output | Interrupt output; connect to VCC through a pullup resistor. |
| 14 | SCL | input | Serial clock line; connect to VCC through a pullup resistor. |
| 15 | SDA | bidirectional | Serial data line; connect to VCC through a pullup resistor. |
| 16 | VCC | power_in | Voltage supply; recommended operating range is 2.5 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
PCF8574N - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
pcf8574n-etched.step/pcf8574n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcf8574n.step/pcf8574n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
05d2e4ff69e5f777, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).