component
FM33LG026A
Public Made by Adomby adom
FUDAN MICRO Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFM33LG026A
FUDAN MICRO · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
FM33LG026A from FUDAN MICRO, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NRST | input | Chip reset pin; its pull-up and filter parameters are given in Table 3-26 (page 88). |
| 2 | PA13 | bidirectional | GPIO with alternate functions UART0_RX, LPUART0_RX (low-power UART receive) and ADC_IN4 (ADC input channel). |
| 3 | PA14 | bidirectional | GPIO with alternate functions UART0_TX, LPUART0_TX (low-power UART transmit) and ADC_IN11 (ADC input channel). |
| 4 | PA15 | bidirectional | GPIO with alternate functions WKUP0 (external wake-up pin), SVS (external supply voltage detection) and COMP3_OUT (comparator output). |
| 5 | PA0 | bidirectional | GPIO with alternate functions COM0 (LCD common), UART4_RX, ADC_IN5 and LUT3_OUT (PGL output). |
| 6 | PA1 | bidirectional | GPIO with alternate functions COM1 (LCD common), UART4_TX, ADC_IN12 and LUT2_OUT (PGL output). |
| 7 | PA2 | bidirectional | GPIO with alternate functions COM2 (LCD common), UART0_RX and LPUART0_RX. |
| 8 | PA3 | bidirectional | GPIO with alternate functions COM3 (LCD common), UART0_TX and LPUART0_TX. |
| 9 | PA4 | bidirectional | GPIO with alternate functions COM4/SEG28 (LCD), GPT1_CH3 (general-timer channel) and COMP2_INN1 (comparator input). |
| 10 | PA5 | bidirectional | GPIO with alternate functions COM5/SEG29 (LCD), GPT1_CH4 (general-timer channel) and COMP2_INN2 (comparator input). |
| 11 | PA6 | bidirectional | GPIO with alternate functions COM6/SEG30 (LCD), OPA1_INN2 (OPA input) and CAN_RX (CAN receive). |
| 12 | PA7 | bidirectional | GPIO with alternate functions COM7/SEG31 (LCD), OPA1_INP2 (OPA input) and CAN_TX (CAN transmit). |
| 13 | PA8 | bidirectional | GPIO with alternate functions SEG0 (LCD), LPT32_CH1 (low-power timer channel), SPI1_SSN (SPI chip select) and COMP2_INP1 (comparator input). |
| 14 | PA9 | bidirectional | GPIO with alternate functions SEG1 (LCD), LPT32_CH2 (low-power timer channel), SPI1_SCK (SPI clock) and COMP2_INP2 (comparator input). |
| 15 | PA10 | bidirectional | GPIO with alternate functions WKUP1 (external wake-up pin), SEG2 (LCD), LPT32_ETR (low-power timer external trigger) and COMP1_INN1 (comparator input). |
| 16 | PA11 | bidirectional | GPIO with alternate functions SEG32 (LCD), SCL (I2C clock) and LPUART2_RX (low-power UART receive). |
| 17 | PA12 | bidirectional | GPIO with alternate functions SEG33 (LCD), SDA (I2C data) and LPUART2_TX (low-power UART transmit). |
| 18 | PB0 | bidirectional | GPIO with alternate functions SEG34 (LCD), UART3_RX, SPI1_MISO and OPA1_OUT3 (OPA output). |
| 19 | PB1 | bidirectional | GPIO with alternate functions SEG35 (LCD), UART3_TX, SPI1_MOSI and OPA1_OUT4 (OPA output); Table 2-1 labels this row as an external wake-up pin, see review_required. |
| 20 | PB2 | bidirectional | GPIO with alternate functions WKUP2 (external wake-up pin), VCIN1 (LCD capacitor pin in capacitor-drive mode), UART4_RX and ATIM_CH1N (advanced-timer channel). |
| 21 | PB3 | bidirectional | GPIO with alternate functions VCIN2 (LCD capacitor pin in capacitor-drive mode), UART4_TX and ATIM_CH2N (advanced-timer channel). |
| 22 | PB4 | bidirectional | GPIO with alternate functions SEG3 (LCD), ATIM_CH1 (advanced-timer channel), LPUART2_RX and COMP3_INN1 (comparator input). |
| 23 | PB5 | bidirectional | GPIO with alternate functions SEG4 (LCD), ATIM_CH2 (advanced-timer channel), LPUART2_TX and COMP3_INN2 (comparator input). |
| 24 | PB6 | bidirectional | GPIO with alternate functions SEG5 (LCD), ATIM_CH3 (advanced-timer channel) and SPI2_SSN (SPI chip select). |
| 25 | PB7 | bidirectional | GPIO with alternate functions SEG6 (LCD), ATIM_CH4 (advanced-timer channel), SPI2_SCK (SPI clock) and ANATST (factory analog test channel). |
| 26 | PB8 | bidirectional | GPIO with alternate functions SEG7 (LCD), SPI0_SSN (SPI chip select), ATIM_CH3N (advanced-timer channel) and COMP1_INP1 (comparator input). |
| 27 | PB9 | bidirectional | GPIO with alternate functions SEG8 (LCD), SPI0_SCK (SPI clock), GPT0_ETR (general-timer external trigger) and COMP1_INP2 (comparator input). |
| 28 | PB10 | bidirectional | GPIO with alternate functions SEG9 (LCD), OPA1_INN1 (OPA input), SPI0_MISO (SPI data) and GPT0_CH1 (general-timer channel). |
| 29 | PB11 | bidirectional | GPIO with alternate functions SEG10 (LCD), OPA1_INP1 (OPA input), SPI1_MOSI (SPI data) and GPT0_CH2 (general-timer channel). |
| 30 | PB12 | bidirectional | GPIO with alternate functions WKUP3 (external wake-up pin), FOUT1 (clock frequency output), ATIM_ETR (advanced-timer external trigger) and OPA1_OUT1 (OPA output). |
| 31 | PB13 | bidirectional | GPIO with alternate functions SEG11 (LCD), UART1_RX and LPUART1_RX (low-power UART receive). |
| 32 | PB14 | bidirectional | GPIO with alternate functions SEG12 (LCD), UART1_TX and LPUART1_TX (low-power UART transmit). |
| 33 | PD12 | bidirectional | GPIO with alternate functions VDISP1 (external LCD capacitor in capacitor-drive mode), SDA (I2C data) and SPI2_MOSI (SPI data). |
| 34 | PC0 | bidirectional | GPIO with alternate functions VDISP2 (external LCD capacitor), COMP3_INP1 (comparator input), LUT0_OUT (PGL output) and GPT1_CH1 (general-timer channel). |
| 35 | PC1 | bidirectional | GPIO with alternate functions VDISP3 (external LCD capacitor), COMP3_INP2 (comparator input), LUT1_OUT (PGL output) and GPT1_CH2 (general-timer channel). |
| 36 | PC2 | bidirectional | GPIO with alternate functions XTHIN (high-frequency crystal input), UART1_RX and LPUART1_RX (low-power UART receive). |
| 37 | PC3 | bidirectional | GPIO with alternate functions XTHOUT (high-frequency crystal output), UART1_TX and LPUART1_TX (low-power UART transmit). |
| 38 | PC4 | bidirectional | GPIO with alternate functions SEG13 (LCD), OPA1_OUT2 (OPA output), COMP1_OUT (comparator output) and UART5_RX. |
| 39 | PC5 | bidirectional | GPIO with alternate functions SEG14 (LCD), DAC_OUT (DAC output), COMP2_OUT (comparator output) and UART5_TX. |
| 40 | PC6 | bidirectional | GPIO with alternate functions WKUP4 (external wake-up pin), SEG15 (LCD), GPT1_ETR (general-timer external trigger) and COMP1_INN2 (comparator input). |
| 41 | PC7 | bidirectional | GPIO with alternate functions SEG16 (LCD), SPI2_SSN (SPI chip select) and ADC_IN6 (ADC input channel). |
| 42 | PC8 | bidirectional | GPIO with alternate functions SEG17 (LCD), SPI2_SCK (SPI clock) and ADC_IN13 (ADC input channel). |
| 43 | PC9 | bidirectional | GPIO with alternate functions SEG18 (LCD), SPI2_MISO (SPI data) and ADC_IN14 (ADC input channel). |
| 44 | PC10 | bidirectional | GPIO with alternate functions WKUP5 (external wake-up pin), SEG19 (LCD), SPI2_MOSI (SPI data) and ADC_IN15 (ADC input channel). |
| 45 | PC11 | bidirectional | GPIO with alternate functions SEG20 (LCD), U7816CLK (ISO7816 clock), GPT0_CH3 (general-timer channel) and ADC_IN16 (ADC input channel). |
| 46 | PC12 | bidirectional | GPIO with alternate functions SEG21 (LCD), U7816IO (ISO7816 data, 10K pull-up as stated in Table 2-1), GPT0_CH4 (general-timer channel) and ADC_IN17 (ADC input channel). |
| 47 | PH15 | bidirectional | GPIO with alternate functions RTCOUT (RTCB output signal) and Tamper (tamper-detection signal input). |
| 48 | XT32KO | passive | Output pin of the 32768 Hz crystal oscillator. |
| 49 | XT32KI | passive | Input pin of the 32768 Hz crystal oscillator. |
| 50 | VDD15 | power_out | Output of the internal LDO; an external 100 nF capacitor to ground is required. |
| 51 | VSS | power_in | Ground pin; the datasheet limits the voltage difference between all ground pins to 50 mV ( |
| 52 | VDD | power_in | Main supply pin with a typical operating range of 1.65 to 5.5 V (Table 3-2). |
| 53 | VREFP | passive | Reference source pin used as the ADC reference (see section 38.6.2, Using VREFP as reference). |
| 54 | VBAT | power_in | Backup supply pin: 1.5 to 5.5 V when tied to VDD without power switching, or 1.5 to 4.2 V when powered separately with power switching enabled (Table 3-2). |
| 55 | PD11 | bidirectional | GPIO with alternate functions WKUP6 (external wake-up pin), FOUT0 (clock frequency output), ATIM_BRK1 (advanced-timer brake input) and ADC_IN0 (ADC input channel). |
| 56 | PD0 | bidirectional | GPIO with alternate functions SEG22 (LCD), UART5_RX, GPT2_CH1 (general-timer channel) and ADC_IN7 (ADC input channel). |
| 57 | PD1 | bidirectional | GPIO with alternate functions SEG23 (LCD), UART5_TX, GPT2_CH2 (general-timer channel) and ADC_IN1 (ADC input channel). |
| 58 | PD2 | bidirectional | GPIO with alternate functions SEG24 (LCD), SPI1_SSN (SPI chip select), GPT2_CH3 (general-timer channel) and ADC_IN8 (ADC input channel). |
| 59 | PD3 | bidirectional | GPIO with alternate functions SEG25 (LCD), SPI1_SCK (SPI clock), GPT2_CH4 (general-timer channel) and ADC_IN2 (ADC input channel). |
| 60 | PD4 | bidirectional | GPIO with alternate functions SEG26 (LCD), SPI1_MISO (SPI data), GPT2_ETR (general-timer external trigger) and ADC_IN9 (ADC input channel). |
| 61 | PD5 | bidirectional | GPIO with alternate functions SEG27 (LCD), SPI1_MOSI (SPI data), LPT16_ETR (LPTIM16 external trigger) and ADC_IN3 (ADC input channel). |
| 62 | PD6 | bidirectional | GPIO with alternate functions WKUP7 (external wake-up pin), ANATST (analog test channel), ATIM_BRK2 (advanced-timer brake input) and ADC_IN10 (ADC input channel). |
| 63 | PD7 | bidirectional | GPIO with alternate functions UART3_RX (UART receive) and SWCLK (SWD clock). |
| 64 | PD8 | bidirectional | GPIO with alternate functions UART3_TX (UART transmit) and SWIO (SWD data). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (includes VDD, VDDA) | VDD-VSS | -0.3 | 6.5 | V | 61 | ||
| Pin voltage | VPIN | 6.5 | V | 61 | |||
| ADC reference voltage | VREFP-VREFN | -0.3 | 6.5 | V | 61 | ||
| Voltage difference between all ground pins | /ΔVSS/ | 50 | mV | 61 | |||
| Operating temperature | TA | -40 | 105 | ℃ | 符合 AEC-Q100 grade2 | 61 | |
| Storage temperature | TSTG | -55 | 150 | ℃ | 61 | ||
| ESD HBM, pin PC5 (DAC_OUT) | HBM | -2000 | 2000 | V | TA=25℃, JEDEC JS-001 | 61 | |
| ESD HBM, all other pins | HBM | -4000 | 4000 | V | TA=25℃, JEDEC JS-001 | 61 | |
| ESD CDM | CDM | -1000 | 1000 | V | TA=25℃, JEDEC JS-002 | 61 | |
| IO latch-up | LU | -210 | 210 | mA | -(0.5VDD) < VI < (1.5VDD), TA=25℃, JESD78E | 61 | |
| Maximum total current into VDD (source) | ∑IVDD | 120 | mA | 61 | |||
| Maximum total current out of VSS (sink) | ∑IVSS | 100 | mA | 61 | |||
| Maximum total sink current of all IO | ∑IIO | 100 | mA | all IO sink | 61 | ||
| Maximum total source current of all IO | ∑IIO | 120 | mA | all IO source | 61 | ||
| AHB clock frequency | fHCLK | 0 | 64 | MHz | TA=-40~105C | 62 | |
| APB clock frequency | fPCLK | 0 | 64 | MHz | TA=-40~105C | 62 | |
| Typical operating supply voltage range | VDD | 1.65 | 5.5 | V | TA=-40~105C | 62 | |
| Backup supply voltage range, power switch not used (VBAT shorted to VDD) | VBAT | 1.5 | 5.5 | V | 不使用电源切换功能,应与 VDD 短接 | 62 | |
| Backup supply voltage range, power switch used (VBAT powered separately) | VBAT | 1.5 | 4.2 | V | 使用电源切换功能,VBAT 单独供电 | 62 | |
| Junction temperature | TJ | -40 | 125 | °C | 62 | ||
| Run mode current, CoreMark from Flash | IDDRUN | 1.36 | 1.65 | mA | fAHB=8MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ | 62 | |
| Run mode current, CoreMark from Flash | IDDRUN | 1.4 | 1.7 | mA | fAHB=8MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ | 62 | |
| Run mode current, CoreMark from Flash | IDDRUN | 2.4 | mA | fAHB=16MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ | 62 | ||
| Run mode current, CoreMark from Flash | IDDRUN | 2.5 | mA | fAHB=16MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ | 62 | ||
| Run mode current, CoreMark from Flash | IDDRUN | 3.15 | 3.5 | mA | fAHB=24MHz (RCHF), PLL off, Flash 0 wait, TA=25℃ | 62 | |
| Run mode current, CoreMark from Flash | IDDRUN | 3.12 | 3.6 | mA | fAHB=24MHz (RCHF), PLL off, Flash 0 wait, TA=105℃ | 62 | |
| Run mode current, CoreMark from Flash | IDDRUN | 5.66 | 6 | mA | fAHB=64MHz, PLL on, Flash 1 wait, TA=25℃ | 62 | |
| Run mode current, CoreMark from Flash | IDDRUN | 6.2 | mA | fAHB=64MHz, PLL on, Flash 1 wait, TA=105℃ | 62 | ||
| Run mode current, CoreMark from Flash | IDDRUN | 150 | uA | fAHB=614KHz (RCLF), PLL off, Flash 0 wait, TA=25℃ | 62 | ||
| Run mode current, CoreMark from Flash | IDDRUN | 200 | uA | fAHB=614KHz (RCLF), PLL off, Flash 0 wait, TA=105℃ | 62 |
CAD (KiCad official)
- Symbol:
FM33LG026A - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
fm33lg026a-etched.step/fm33lg026a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm33lg026a.step/fm33lg026a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (100 pp, sha256
bfd0cc3c1ded70af, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).