Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1700T-2302E

Microchip Tech · Power Management Specialized - PMIC · SOT-23-3

MCP1700T-2302E from Microchip Tech, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; the LDO output regulation is referenced to this pin and only the 1.6 µA typical bias current flows out of it.
2 VOUT power_out Regulated output voltage that carries the full DC load current, rated 250 mA for outputs of 2.5V and above and 200 mA for outputs below 2.5V.
3 VIN power_in Unregulated input supply, specified from 2.3V to 6.0V, which needs low source impedance for stable LDO operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.3 6 V Note 1 3
Absolute Maximum VDD VDD 6.5 V 3
All inputs and outputs w.r.t. VSS -0.3 V w.r.t. VSS; upper limit is VIN + 0.3V 3
Storage Temperature Range TA -65 150 °C 4
Maximum Junction Temperature TJ 150 °C 3
Operating Junction Temperature TJ -40 125 °C 4
Specified Temperature Range TA -40 125 °C 4
ESD protection HBM 4 kV all pins, HBM 3
ESD protection MM 400 V all pins, MM 3
Output Voltage Regulation VOUT -2 2 % Note 2 (VR ± 2.0%) 3
Output Voltage Regulation over junction temperature VOUT -3 3 % Note 2; boldface, TJ = -40°C to +125°C 3
Line Regulation VOUT/(VOUT×VIN) -1 0.75 1 %/V (VR + 1)V ≤ VIN ≤ 6V 3
Load Regulation VOUT/VOUT -1.5 1 1.5 % IL = 0.1 mA to 250 mA for VR ≥ 2.5V; IL = 0.1 mA to 200 mA for VR < 2.5V 3
Input Quiescent Current Iq 1.6 4 µA IL = 0 mA, VIN = VR + 1V 3
Output Short Circuit Current IOUT_SC 408 mA VIN = VR + 1V, VOUT = GND; peak current measured 10 ms after short is applied 3
VOUT Temperature Coefficient TCVOUT 50 ppm/°C Note 3 3
Output Rise Time TR 500 µs 10% VR to 90% VR; VIN = 0V to 6V, RL = 50 Ω resistive 3
Output Noise eN 3 µV/(Hz)1/2 IL = 100 mA, f = 1 kHz, COUT = 1 µF 4
Thermal Shutdown Protection TSD 140 °C VIN = VR + 1V, IL = 100 µA 4
Thermal Resistance, SOT-23 junction to air θJA 212 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4
Thermal Resistance, SOT-23 junction to case top θJC(Top) 139 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4
Thermal Resistance, SOT-23 junction to case bottom θJC(Bottom) 11.95 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4
Thermal Resistance, SOT-23 junction to top characterization ΨJT 6.15 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4

CAD (KiCad official)

  • Symbol: MCP1700T-2302E
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1700t-2302e-etched.step / mcp1700t-2302e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1700t-2302e.step / mcp1700t-2302e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 44919ee695b5d6ef, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF