Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LDI8119-3.3EN

(DIOTEC) · Linear Voltage Regulators (LDO) · SOT-23-5

LDI8119-3.3EN from (DIOTEC), in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage pin, rated for a maximum of 18.0 V with a stated input range of 1.8 V to 18.0 V.
2 GND power_in Ground reference pin for the regulator.
3 EN input On/off enable input; the datasheet gives a start-up threshold VENH of 1.70 V minimum and a shut-down threshold VENL of 0.50 V maximum.
4 NC unconnected Not connected.
5 VOUT power_out Regulated fixed output voltage (3.3 V for this variant) delivering up to 500 mA.

Key specifications

Parameter Value
Manufacturer (DIOTEC)
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (LDI8119-3.3EN) VOUT 3.27 3.3 3.33 V IOUT = 30 mA, VIN = VOUT + 1.0V 2
Output voltage tolerance -1 1 % 1
Input voltage VIN 1.8 18 V 2
Load regulation ΔVOUT 7 20 mV VIN = VOUT + 1.0V, 1mA ≤ IOUT ≤ 100 mA 2
Quiescent current IQ 1.8 3.6 µA VIN = VOUT + 1.0V, no load 2
Shutdown current IINL 0.01 0.2 µA VEN < VENL 2
EN input voltage start up (VENH) VENH 1.7 V 2
EN input voltage shut down (VENL) VENL 0.5 V 2
Input voltage (absolute maximum) VIN 18 V 1
Output current (absolute maximum) IOUT 500 mA 1
Power dissipation Ptot 400 mW Mounted on P.C. board with 3 mm2 copper pad at each terminal 1
Junction temperature Tj -40 125 °C 1
Storage temperature TS -40 150 °C 1
Thermal resistance junction to case RthC 250 K/W Typical 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper pad at each terminal 1

CAD (KiCad official)

  • Symbol: LDI8119-3.3EN
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ldi8119-3-3en-etched.step / ldi8119-3-3en-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldi8119-3-3en.step / ldi8119-3-3en.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: (DIOTEC) datasheet (5 pp, sha256 3a12879d5fe8fbc1, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF