3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC3775YMM-TR
Microchip Tech · Linear Voltage Regulators (LDO) · MSOP-8
MIC3775YMM-TR from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input is CMOS-compatible: logic high enables the regulator, logic low or open shuts it down, and the pin must not be left floating. |
| 2 | IN | power_in | Supply input; the operating ratings specify a supply voltage of +2.25V to +6V. |
| 3 | ADJ | input | Adjustment feedback input that connects to a resistive voltage-divider network to set the output voltage from 1.24V up to the 6V family maximum. |
| 4 | OUT | power_out | Regulator output, which supplies up to 750 mA minimum and requires a ceramic output capacitor of at least 4.7 µF (10 µF or greater recommended). |
| 5 | GND | power_in | Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance. |
| 6 | GND | power_in | Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance. |
| 7 | GND | power_in | Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance. |
| 8 | GND | power_in | Ground pin; it is joined to the die attach paddle and can be soldered to a ground plane to reduce thermal resistance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | -1 | 1 | % | 10 mA | 3 | |
| Output Voltage | VOUT | -2 | 2 | % | 10 mA ≤ IOUT ≤ 750 mA, VOUT + 1V ≤ VIN ≤ 6V | 3 | |
| Line Regulation | ΔVOUT/VOUT | 0.06 | 0.5 | % | IOUT = 10 mA, VOUT + 1V ≤ VIN ≤ 6V | 3 | |
| Load Regulation | ΔVOUT/VOUT | 0.2 | 1 | % | VIN = VOUT + 1V, 10 mA ≤ IOUT ≤ 750 mA | 3 | |
| Dropout Voltage | VDO | 125 | 200 | mV | IOUT = 100 mA | 3 | |
| Dropout Voltage (bold, -40°C ≤ TJ ≤ +125°C) | VDO | 250 | mV | IOUT = 100 mA, bold values indicate -40°C ≤ TJ ≤ +125°C | 3 | ||
| Dropout Voltage | VDO | 280 | 500 | mV | IOUT = 750 mA | 3 | |
| Ground Current | IGND | 7.5 | 15 | mA | IOUT = 750 mA, VIN = VOUT + 1V | 4 | |
| Current Limit | IOUT(LIM) | 1.6 | 2.5 | A | VOUT = 0V, VIN = VOUT + 1V | 4 | |
| Enable Input Voltage (logic low, off) | VEN | 0.8 | V | Logic low (off) | 4 | ||
| Enable Input Voltage (logic high, on) | VEN | 2.25 | V | Logic high (on) | 4 | ||
| Enable Input Current | IEN | 1 | 10 | 30 | µA | VEN = 2.25V | 4 |
| Enable Input Current (bold, -40°C ≤ TJ ≤ +125°C) | IEN | 2 | µA | VEN = 2.25V, bold values indicate -40°C ≤ TJ ≤ +125°C | 4 | ||
| Enable Input Current (bold, -40°C ≤ TJ ≤ +125°C) | IEN | 4 | µA | VEN = 0.8V, bold values indicate -40°C ≤ TJ ≤ +125°C | 4 | ||
| Output Leakage Current | IFLG(LEAK) | 0.01 | 1 | µA | VOH = 6V | 4 | |
| Output Leakage Current (bold, -40°C ≤ TJ ≤ +125°C) | IFLG(LEAK) | 2 | µA | VOH = 6V, bold values indicate -40°C ≤ TJ ≤ +125°C | 4 | ||
| Output Low Voltage | VFLG(DO) | 250 | 500 | mV | VIN = 2.250V, IOL = 250 µA | 4 | |
| Low Threshold | VFLG | 93 | % | % of VOUT | 4 | ||
| High Threshold | VFLG | 99.2 | % | % of VOUT | 4 | ||
| Reference Voltage (adjustable only) | VREF | 1.227 | 1.24 | 1.252 | V | 4 | |
| Reference Voltage (adjustable only, bold, -40°C ≤ TJ ≤ +125°C) | VREF | 1.215 | 1.265 | V | bold values indicate -40°C ≤ TJ ≤ +125°C | 4 | |
| Adjust Pin Bias Current (adjustable only) | 40 | 80 | nA | 4 | |||
| Adjust Pin Bias Current (adjustable only, bold, -40°C ≤ TJ ≤ +125°C) | 120 | nA | bold values indicate -40°C ≤ TJ ≤ +125°C | 4 | |||
| Supply Voltage (VIN) | VIN | 6.5 | V | 3 | |||
| Enable Voltage (VEN) | VEN | 6.5 | V | 3 | |||
| Lead Temperature | 260 | °C | Soldering, 5 sec. | 3 | |||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| Supply Voltage (VIN) operating | VIN | 2.25 | 6 | V | 3 | ||
| Enable Voltage (VEN) operating | VEN | 0 | 6 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance, MSOP 8-Ld | θJA | 80 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC3775YMM-TR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic3775ymm-tr-etched.step/mic3775ymm-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic3775ymm-tr.step/mic3775ymm-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
9c378ab5b5d63e4b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).