component
TLC1078IDR
Public Made by Adomby adom
Texas Instruments Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLC1078IDR
Texas Instruments · Precision Op Amps · SOIC-8
TLC1078IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1, with output drive capability greater than 20 mA and output swing to the negative rail. |
| 2 | 1IN- | input | Inverting input of amplifier 1, a high-impedance LinCMOS input with typical input bias current of 0.6 pA. |
| 3 | 1IN+ | input | Noninverting input of amplifier 1, a high-impedance LinCMOS input whose common-mode range extends below the negative rail. |
| 4 | GND | power_in | Ground / negative supply pin of the device. |
| 5 | 2IN+ | input | Noninverting input of amplifier 2, a high-impedance LinCMOS input whose common-mode range extends below the negative rail. |
| 6 | 2IN- | input | Inverting input of amplifier 2, a high-impedance LinCMOS input with typical input bias current of 0.6 pA. |
| 7 | 2OUT | output | Output of amplifier 2, with output drive capability greater than 20 mA and output swing to the negative rail. |
| 8 | VDD | power_in | Positive supply pin, operating from a supply voltage of 1.4 V minimum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TLC1078IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlc1078idr-etched.step/tlc1078idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc1078idr.step/tlc1078idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
6cb44adc21fbf578, retrieved 2026-10-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).