component
1N5346BRLG
Public Made by Adomby adom
onsemi Zener Diodes, DO-27. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1N5346BRLG
onsemi · Zener Diodes · DO-27
1N5346BRLG from onsemi, in a DO-27. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DO-27 |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zener voltage (nominal 9.1 V, 5% type) | VZ | 8.65 | 9.1 | 9.56 | V | @ IZT = 150 mA (Note 3) | 2 |
| Zener voltage tolerance (B suffix, JEDEC type number designation) | -5 | 5 | % | B suffix; JEDEC type number indicates ±5% (Note 2) | 2 | ||
| Maximum Zener impedance | ZZT | 2 | Ω | @ IZT = 150 mA (Note 3) | 2 | ||
| Maximum Zener impedance | ZZK | 150 | Ω | @ IZK = 1 mA (Note 3) | 2 | ||
| Reverse leakage current | IR | 7.5 | µA | @ VR = 6.9 V | 2 | ||
| Maximum surge current | IR | 9.2 | A | Peak non-recurrent square wave, PW = 8.3 ms, TA = 25°C (Note 4) | 2 | ||
| Reverse Zener voltage change (regulation) | VZ | 0.22 | V | VZ measured at 10% and 50% of IZ max, 40 ±10 ms (Note 5) | 2 | ||
| Maximum DC Zener current | IZM | 520 | mA | Based on 5 W / VZ; TL = 25°C at 3/8 in from body (Note 6); B-suffix device | 2 | ||
| Forward voltage | VF | 1.2 | V | @ IF = 1.0 A, all types | 2 | ||
| Max steady state power dissipation | PD | 5 | W | TL = 25°C, lead length 3/8 in | 1 | ||
| Junction-to-lead thermal resistance | θJL | 25 | °C/W | Lead length 3/8 in | 1 | ||
| Operating and storage temperature range | TJ, Tstg | -65 | 200 | °C | Note 1: max DC operating 150°C; 200°C for pulsed low duty cycle or non-repetitive | 1 | |
| Maximum lead temperature for soldering | 260 | °C | 1/16 in. from case for 10 s | 1 |
CAD (KiCad official)
- Symbol:
1N5346BRLG - Footprint:
Diode_THT:D_DO-27_P15.24mm_Horizontal - 3D model: DO-27 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
3f6fc7bbfc757336, retrieved 2026-10-21, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).