component
STM32L053R8T6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32L053R8T6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
STM32L053R8T6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD supply pin (VLCD) for the LCD controller, which the datasheet notes may be higher than VDDA and so is not read directly by the ADC. |
| 2 | PC13 | bidirectional | 5 V tolerant (FT) I/O, reset function PC13, with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O, reset function PC14, with additional function OSC32_IN (32 kHz oscillator input). |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O, reset function PC15, with additional function OSC32_OUT (32 kHz oscillator output). |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O, reset function PH0, with alternate function USB_CRS_SYNC and additional function OSC_IN (HSE oscillator input). |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O, reset function PH1, with additional function OSC_OUT (HSE oscillator output). |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPTIM1_IN1, LCD_SEG18, EVENTOUT and TSC_G7_IO1, and additional function ADC_IN10. |
| 9 | PC1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPTIM1_OUT, LCD_SEG19, EVENTOUT and TSC_G7_IO2, and additional function ADC_IN11. |
| 10 | PC2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPTIM1_IN2, LCD_SEG20, SPI2_MISO/I2S2_MCK and TSC_G7_IO3, and additional function ADC_IN12. |
| 11 | PC3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPTIM1_ETR, LCD_SEG21, SPI2_MOSI/I2S2_SD and TSC_G7_IO4, and additional function ADC_IN13. |
| 12 | VSSA | power_in | Analog ground supply pin (VSSA) for the analog blocks such as the ADC, DAC and comparators. |
| 13 | VDDA | power_in | Analog supply pin (VDDA); the datasheet states the ADC operates down to 1.65 V, the DAC down to 1.8 V and the comparators down to 1.65 V. |
| 14 | PA0 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT, and additional functions COMP1_INM6, ADC_IN0 and RTC_TAMP2/WKUP1. |
| 15 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, LCD_SEG0, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE and TIM21_ETR, and additional functions COMP1_INP and ADC_IN1. |
| 16 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH1, LCD_SEG1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT, and additional functions COMP2_INM6 and ADC_IN2. |
| 17 | PA3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH2, LCD_SEG2, TIM2_CH4, TSC_G1_IO4 and USART2_RX, and additional functions COMP2_INP and ADC_IN3. |
| 18 | VSS | power_in | Ground pin; all voltages are referenced to VSS. |
| 19 | VDD | power_in | Digital supply pin; the device power supply range is stated as 1.65 V to 3.6 V on the cover page. |
| 20 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with reduced touch sensing sensitivity (recommended as a sampling capacitor I/O), alternate functions SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, and additional functions COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT. |
| 21 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions COMP1_INM5, COMP2_INM5 and ADC_IN5. |
| 22 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, LCD_SEG3, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 23 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, LCD_SEG4, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 24 | PC4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, LCD_SEG22 and LPUART1_TX, and additional function ADC_IN14. |
| 25 | PC5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LCD_SEG23, LPUART1_RX and TSC_G3_IO1, and additional function ADC_IN15. |
| 26 | PB0 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, LCD_SEG5 and TSC_G3_IO2, and additional functions LCD_VLCD3, ADC_IN8 and VREF_OUT. |
| 27 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LCD_SEG6, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 28 | PB2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPTIM1_OUT and TSC_G3_IO4, and additional function LCD_VLCD2. |
| 29 | PB10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LCD_SEG10, TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK and I2C2_SCL. |
| 30 | PB11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, LCD_SEG11, TIM2_CH4, TSC_G6_IO1, LPUART1_RX and I2C2_SDA. |
| 31 | VSS | power_in | Ground pin; all voltages are referenced to VSS. |
| 32 | VDD | power_in | Digital supply pin; the device power supply range is stated as 1.65 V to 3.6 V on the cover page. |
| 33 | PB12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_NSS/I2S2_WS, LCD_SEG12, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT, and additional function LCD_VLCD1. |
| 34 | PB13 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions SPI2_SCK/I2S2_CK, LCD_SEG13, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1. |
| 35 | PB14 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions SPI2_MISO/I2S2_MCK, LCD_SEG14, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2. |
| 36 | PB15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI/I2S2_SD, LCD_SEG15 and RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM22_CH1, LCD_SEG24 and TSC_G8_IO1. |
| 38 | PC7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM22_CH2, LCD_SEG25 and TSC_G8_IO2. |
| 39 | PC8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM22_ETR, LCD_SEG26 and TSC_G8_IO3. |
| 40 | PC9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_ETR, LCD_SEG27, USB_NOE and TSC_G8_IO4. |
| 41 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO, LCD_COM0, USB_CRS_SYNC, EVENTOUT and USART1_CK. |
| 42 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO, LCD_COM1, TSC_G4_IO1 and USART1_TX. |
| 43 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LCD_COM2, TSC_G4_IO2 and USART1_RX. |
| 44 | PA11 | bidirectional | 5 V tolerant (FT) I/O powered by VDD_USB, with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM. |
| 45 | PA12 | bidirectional | 5 V tolerant (FT) I/O powered by VDD_USB, with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, and additional function USB_DP. |
| 46 | PA13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWDIO (serial wire debug data) and USB_NOE. |
| 47 | VSS | power_in | Ground pin; all voltages are referenced to VSS. |
| 48 | VDD_USB | power_in | Supply pin for the USB-related I/Os (PA11, PA12); the datasheet states that for characteristics referring to VDD, VDD_USB must be used for these pins. |
| 49 | PA14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWCLK (serial wire debug clock) and USART2_TX. |
| 50 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_NSS, LCD_SEG17, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1. |
| 51 | PC10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPUART1_TX and LCD_COM4/LCD_SEG28/LCD_SEG40. |
| 52 | PC11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPUART1_RX and LCD_COM5/LCD_SEG29/LCD_SEG41. |
| 53 | PC12 | bidirectional | 5 V tolerant (FT) I/O with alternate function LCD_COM6/LCD_SEG30/LCD_SEG42. |
| 54 | PD2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions LPUART1_RTS/LPUART1_DE and LCD_COM7/LCD_SEG31/LCD_SEG43. |
| 55 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_SCK, LCD_SEG7, TIM2_CH2, TSC_G5_IO1 and EVENTOUT, and additional function COMP2_INN. |
| 56 | PB4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, LCD_SEG8, EVENTOUT, TSC_G5_IO2 and TIM22_CH1, and additional function COMP2_INP. |
| 57 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, LCD_SEG9, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, and additional function COMP2_INP. |
| 58 | PB6 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP. |
| 59 | PB7 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4, and additional functions COMP2_INP and PVD_IN. |
| 60 | BOOT0 | input | Dedicated BOOT0 pin (input-only, B structure) used for boot mode selection. |
| 61 | PB8 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions LCD_SEG16, TSC_SYNC and I2C1_SCL. |
| 62 | PB9 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O with alternate functions LCD_COM3, EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS. |
| 63 | VSS | power_in | Ground pin; all voltages are referenced to VSS. |
| 64 | VDD | power_in | Digital supply pin; the device power supply range is stated as 1.65 V to 3.6 V on the cover page. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
STM32L053R8T6TR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l053r8t6tr-etched.step/stm32l053r8t6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l053r8t6tr.step/stm32l053r8t6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (136 pp, sha256
b30ef01e0e2d9c80, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).