Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD9283BRSZ-RL50

Analog Devices · Analog To Digital Converters (ADCs) · SSOP-20-208mil

AD9283BRSZ-RL50 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PWRDWN input Power-down function select; logic HIGH for power-down mode, which puts the digital outputs in a high impedance state.
2 VREF OUT power_in Internal reference output (1.25 V typ); bypass with 0.1 µF to ground.
3 VREF IN power_in Reference input for the ADC (1.25 V typ); strap to pin 2 to use the internal reference.
4 GND power_in Ground.
5 VD power_in Analog 3 V power supply.
6 /AIN input Complementary analog input for the ADC; can be left open in single-ended mode, but a 0.1 µF capacitor in series with 25 Ω to ground is recommended for better input matching.
7 AIN input Analog input for the ADC.
8 VD power_in Analog 3 V power supply.
9 GND power_in Ground.
10 ENCODE input Encode clock for the ADC; samples on the rising edge of ENCODE, TTL/CMOS compatible with 1.5 V nominal threshold.
11 D7 tri_state Digital output bit 7 (MSB) of the ADC; goes to high impedance in power-down.
12 D6 tri_state Digital output bit 6 of the ADC; goes to high impedance in power-down.
13 D5 tri_state Digital output bit 5 of the ADC; goes to high impedance in power-down.
14 D4 tri_state Digital output bit 4 of the ADC; goes to high impedance in power-down.
15 VDD power_in Digital output power supply, nominally 2.5 V to 3.6 V.
16 GND power_in Ground.
17 D3 tri_state Digital output bit 3 of the ADC; goes to high impedance in power-down.
18 D2 tri_state Digital output bit 2 of the ADC; goes to high impedance in power-down.
19 D1 tri_state Digital output bit 1 of the ADC; goes to high impedance in power-down.
20 D0 tri_state Digital output bit 0 (LSB) of the ADC; goes to high impedance in power-down.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-20-208mil
Category ADC/DAC/Data Conversion
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Nonlinearity DNL 0.5 1.25 LSB 25°C 2
Differential Nonlinearity (Full) DNL 1.5 LSB Full temp 2
Integral Nonlinearity INL -1.25 0.75 1.25 LSB 25°C 2
Integral Nonlinearity (Full) INL 1.5 LSB Full temp 2
Gain Error -6 2.5 6 % FS 25°C 2
Gain Error (Full) -8 8 % FS Full temp 2
Input Offset Voltage -35 10 35 mV 25°C 2
Input Offset Voltage (Full) -40 40 mV Full temp 2
Reference Voltage 1.2 1.25 1.3 V Full temp 2
Reference Tempco -130 130 ppm/°C Full temp 2
Gain Tempco 80 ppm/°C Full temp 2
Input Resistance 7 10 13 kΩ 25°C 2
Input Resistance (Full) 5 16 kΩ Full temp 2
Maximum Conversion Rate 50 MSPS Full temp 2
Minimum Conversion Rate 1 MSPS 25°C 2
Encode Pulsewidth High tEH 8 1000 ns 25°C 2
Encode Pulsewidth Low tEL 8 1000 ns 25°C 2
Output Valid Time tV 2 3 ns Full temp 2
Output Propagation Delay tPD 4.5 7 ns Full temp 2
Logic 1 Voltage (digital input) 2 V Full temp 2
Logic 0 Voltage (digital input) 0.8 V Full temp 2
Logic 1 Current (digital input) -1 1 µA Full temp 2
Logic 0 Current (digital input) -1 1 µA Full temp 2
Logic 1 Voltage (digital output) 2.95 V Full temp 2
Logic 0 Voltage (digital output) 0.05 V Full temp 2
Power Dissipation 80 100 mW Full temp; encode at rated speed, dc analog input 2
Power-Down Dissipation 4.2 7 mW Full temp 2
Input Voltage Range 512 mV p-p ±512, with respect to AIN, Full 2
Common-Mode Voltage 200 mV ±200, Full 2
Input Capacitance (analog) 2 pF 25°C 2
Analog Bandwidth, Full Power 475 MHz 25°C 2
Aperture Uncertainty (Jitter) 5 ps rms 25°C 2
Input Capacitance (digital) 2 pF 25°C 2
Power Supply Rejection Ratio PSRR 18 mV/V 25°C 2
Transient Response 2 ns 25°C 3
Overvoltage Recovery Time 2 ns 25°C 3
Two-Tone Intermod Distortion IMD 52 dBc fIN = 10.3 MHz, 25°C 3
Supply Voltage (VD, VDD) 2.7 3 3.6 V Single 3.0 V supply operation 1
Operating Temperature Range -40 85 °C Industrial range 1
Supply Voltage VD, VDD VD, VDD 4 V 3
Analog Inputs -0.5 V -0.5 V to VD + 0.5 V 3
Digital Inputs -0.5 V -0.5 V to VDD + 0.5 V 3
VREF IN VREF IN -0.5 V -0.5 V to VD + 0.5 V 3
Digital Output Current 20 mA 3
Operating Temperature (abs max) -55 125 °C 3
Storage Temperature -65 150 °C 3
Maximum Junction Temperature 150 °C 3
Maximum Case Temperature 150 °C 3
Thermal Impedance Junction-Case θJC 46 °C/W Typical, RS style SSOP 20-lead 3
Thermal Impedance Case-Ambient θCA 80 °C/W Typical, RS style SSOP 20-lead 3
Thermal Impedance Junction-Ambient θJA 126 °C/W Typical, RS style SSOP 20-lead 3

CAD (KiCad official)

  • Symbol: AD9283BRSZ-RL50
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: ad9283brsz-rl50-etched.step / ad9283brsz-rl50-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad9283brsz-rl50.step / ad9283brsz-rl50.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 8983c2f811937a59, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF