TLV2333IDGKR
Public Unreviewedby Ray
Texas Instruments Operational Amplifier, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTLV2333IDGKR
Texas Instruments · Operational Amplifier · VSSOP-8
TLV2333IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A op-amp. Rail-to-rail output stage capable of driving up to ±0.9 V from the rails on a 1.8 V supply. |
| 2 | -IN A | input | Inverting input of channel A. Rail-to-rail CMOS input, high impedance. |
| 3 | +IN A | input | Noninverting input of channel A. Rail-to-rail CMOS input, high impedance. |
| 4 | V- | power_in | Negative (lowest) power supply rail. Tie to GND for single-supply operation, or to a negative rail for split-supply operation. Total supply span (V+ − V−) must be 1.8 V to 5.5 V. |
| 5 | +IN B | input | Noninverting input of channel B. Rail-to-rail CMOS input, high impedance. |
| 6 | -IN B | input | Inverting input of channel B. Rail-to-rail CMOS input, high impedance. |
| 7 | OUT B | output | Output of channel B op-amp. Rail-to-rail output stage. |
| 8 | V+ | power_in | Positive (highest) power supply rail. Total supply span (V+ − V−) must be 1.8 V to 5.5 V. Bypass with a ceramic capacitor to V−. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TLV2333IDGKRTLV2333IDGKRIDR
CAD (KiCad official)
- Symbol:
TLV2333IDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
tlv2333idgkr.step |
122 KB | You want the bare part, or you mark your own boards. |
tlv2333idgkr-etched.step |
2.4 MB | You want the part with TLV2333IDGKR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 593 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
a30bc52f81b603de, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).