3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHK32C030F8P7
HK · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
HK32C030F8P7 from HK, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PF8/BOOT0/AIN21 | bidirectional | 5V-tolerant GPIO that is BOOT0 after reset, with TIM1_CH2, TIM14_CH1, SPI2_SCK, I2C2_SCL, UART2_RX, UART3_TX, EXTI8 and ADC input AIN21. |
| 2 | PF0/OSC_IN | bidirectional | GPIO (PF0 after reset) that is also the HSE oscillator input OSC_IN, with TIM14_CH1, I2C1_SDA and EXTI0. |
| 3 | PF1/OSC_OUT | bidirectional | GPIO (PF1 after reset) that is also the HSE oscillator output OSC_OUT, with TIM3_CH1, I2C1_SCL and EXTI1. |
| 4 | NRST | bidirectional | Active-low system reset I/O with internal pull-up, 5V tolerant, where input low pulses up to 70 ns are ignored. |
| 5 | VDDA | power_in | Analog supply, operating range 2.6 V to 5.5 V, which may be lower than VDD. |
| 6 | PA0/AIN0 | bidirectional | 5V-tolerant GPIO with TIM2_CH1_ETR, UART1_RX, EXTI0, ADC input AIN0 and RTC_TAMP2. |
| 7 | PA1/AIN1 | bidirectional | 5V-tolerant GPIO with CM0_TXEV, TIM2_CH2, UART1_TX, TIM15_CH1N, EXTI1 and ADC input AIN1. |
| 8 | PA2/AIN2 | bidirectional | 5V-tolerant GPIO with TIM15_CH1, UART1_TX, TIM2_CH3, UART2_TX, EXTI2 and ADC input AIN2. |
| 9 | PA3/AIN3 | bidirectional | 5V-tolerant GPIO with TIM15_CH2, UART1_RX, TIM2_CH4, UART2_RX, I2C1_SCL, I2C2_SCL, EXTI3 and ADC input AIN3. |
| 10 | PA4/AIN4 | bidirectional | 5V-tolerant GPIO with SPI1_NSS, TIM14_CH1, I2C1_SDA, I2C2_SDA, EXTI4 and ADC input AIN4. |
| 11 | PA5/AIN5 | bidirectional | 5V-tolerant GPIO with SPI1_SCK, TIM2_CH1_ETR, I2C1_SDA, UART1_TX, I2C2_SDA, EXTI5 and ADC input AIN5. |
| 12 | PA6/AIN6 | bidirectional | 5V-tolerant GPIO with SPI1_MISO, TIM3_CH1, TIM1_BKIN, I2C1_SCL, TIM16_CH1, CM0_TXEV, EXTI6 and ADC input AIN6. |
| 13 | PA7/AIN7 | bidirectional | 5V-tolerant GPIO with SPI1_MOSI, TIM3_CH2, TIM1_CH1N, IRTIM_IROUT, TIM14_CH1, TIM17_CH1, RCC_MCO, EXTI7 and ADC input AIN7. |
| 14 | PB1/AIN9 | bidirectional | 5V-tolerant GPIO with TIM14_CH1, TIM3_CH4, TIM1_CH3N, SPI1_MOSI, SPI2_MOSI, EXTI1 and ADC input AIN9. |
| 15 | VSS | power_in | Digital ground. |
| 16 | VDD | power_in | Digital supply, operating range 2.6 V to 5.5 V. |
| 17 | PA9 | bidirectional | 5V-tolerant GPIO with TIM15_BKIN, UART1_TX, TIM1_CH2, SPI1_MISO, I2C1_SCL, RCC_MCO, SPI2_MOSI, UART3_RX, I2C2_SCL, TIM14_CH1 and EXTI9. |
| 18 | PA10 | bidirectional | 5V-tolerant GPIO with TIM17_BKIN, UART1_RX, TIM1_CH3, SPI1_MOSI, I2C1_SDA, TIM15_CH1, SPI2_SCK, UART3_TX, I2C2_SDA and EXTI10. |
| 19 | PA13/SWDIO | bidirectional | 5V-tolerant GPIO that is the SWDIO debug data pin after reset, with IRTIM_IROUT, TIM2_CH1_ETR, TIM17_CH1, SPI1_SCK, SPI2_MOSI, I2C1_SCL, I2C2_SCL and EXTI13. |
| 20 | PA14/SWCLK/AIN13 | bidirectional | 5V-tolerant GPIO that is the SWCLK debug clock pin after reset, with UART1_TX, TIM1_CH1, I2C1_SDA, I2C2_SDA, SPI2_MISO, UART3_TX, UART2_TX, EXTI14 and ADC input AIN13. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
HK32C030F8P7 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
hk32c030f8p7-etched.step/hk32c030f8p7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk32c030f8p7.step/hk32c030f8p7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HK datasheet (59 pp, sha256
7a421603db583fc2, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).