3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTC12C5A56S2-35I
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
STC12C5A56S2-35I from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.5 | bidirectional | P1.5 general I/O with MOSI SPI function and ADC5 analog input (set to open-drain or high-impedance input for A/D use). |
| 2 | P1.6 | bidirectional | P1.6 general I/O with MISO SPI function and ADC6 analog input. |
| 3 | P1.7 | bidirectional | P1.7 general I/O with SCLK SPI clock function and ADC7 analog input. |
| 4 | RST/P4.7 | input | Reset input or P4.7 I/O, selected at ISP programming time; as P4.7 an external clock is required. |
| 5 | P3.0/RxD | bidirectional | P3.0 I/O with UART1 receive RxD; can wake the MCU from power-down. |
| 6 | P4.3/SCLK/TxD2/CCP1 | bidirectional | P4.3 I/O that can carry SPI SCLK, UART2 TxD2 or CCP1 when switched from P1 via AUXR1. |
| 7 | P3.1/TxD | bidirectional | P3.1 I/O with UART1 transmit TxD. |
| 8 | P3.2/INT0 | bidirectional | P3.2 I/O with external interrupt 0; can wake the MCU from power-down. |
| 9 | P3.3/INT1 | bidirectional | P3.3 I/O with external interrupt 1; can wake the MCU from power-down. |
| 10 | P3.4/T0/CLKOUT0 | bidirectional | P3.4 I/O with Timer0 external input and Timer0 overflow clock output CLKOUT0. |
| 11 | P3.5/T1/CLKOUT1 | bidirectional | P3.5 I/O with Timer1 external input and Timer1 overflow clock output CLKOUT1. |
| 12 | P3.6/WR | bidirectional | P3.6 I/O, also external data memory write strobe WR. |
| 13 | P3.7/RD | bidirectional | P3.7 I/O, also external data memory read strobe RD. |
| 14 | XTAL2 | output | Crystal oscillator output; leave floating when an external clock is fed to XTAL1 or the internal RC oscillator is used. |
| 15 | XTAL1 | input | Crystal oscillator input or external clock input. |
| 16 | Gnd | power_in | Ground. |
| 17 | P4.0/SS | bidirectional | P4.0 I/O that carries SPI SS when SPI is switched to P4. |
| 18 | P2.0 | bidirectional | P2.0 general I/O (address bus high byte for external memory). |
| 19 | P2.1 | bidirectional | P2.1 general I/O (address bus high byte for external memory). |
| 20 | P2.2 | bidirectional | P2.2 general I/O (address bus high byte for external memory). |
| 21 | P2.3 | bidirectional | P2.3 general I/O (address bus high byte for external memory). |
| 22 | P2.4 | bidirectional | P2.4 general I/O (address bus high byte for external memory). |
| 23 | P2.5 | bidirectional | P2.5 general I/O (address bus high byte for external memory). |
| 24 | P2.6 | bidirectional | P2.6 general I/O (address bus high byte for external memory). |
| 25 | P2.7 | bidirectional | P2.7 general I/O (address bus high byte for external memory). |
| 26 | P4.4/NA | bidirectional | After reset a weak pull-up with no function; setting P4SW.4=1 makes it P4.4 I/O. |
| 27 | P4.5/ALE | bidirectional | After reset it is the ALE signal (output only on MOVX external access); setting P4SW.5=1 makes it P4.5 I/O. |
| 28 | P4.1/ECI/MOSI | bidirectional | P4.1 I/O that carries PCA ECI or SPI MOSI when switched to P4. |
| 29 | P4.6/EX_LVD/RST2 | bidirectional | After reset it is the external low-voltage detect input / second reset pin (threshold about 1.33V); setting P4SW.6=1 makes it P4.6 I/O. |
| 30 | P0.7 | bidirectional | P0.7 general I/O (external bus AD7). |
| 31 | P0.6 | bidirectional | P0.6 general I/O (external bus AD6). |
| 32 | P0.5 | bidirectional | P0.5 general I/O (external bus AD5). |
| 33 | P0.4 | bidirectional | P0.4 general I/O (external bus AD4). |
| 34 | P0.3 | bidirectional | P0.3 general I/O (external bus AD3). |
| 35 | P0.2 | bidirectional | P0.2 general I/O (external bus AD2). |
| 36 | P0.1 | bidirectional | P0.1 general I/O (external bus AD1). |
| 37 | P0.0 | bidirectional | P0.0 general I/O (external bus AD0). |
| 38 | Vcc | power_in | Positive supply, 3.5V to 5.5V for the STC12C5A56S2 5V device. |
| 39 | P4.2/MISO/RxD2/CCP0 | bidirectional | P4.2 I/O that carries SPI MISO, UART2 RxD2 or CCP0 when switched from P1 via AUXR1. |
| 40 | P1.0/ADC0/CLKOUT2 | bidirectional | P1.0 I/O with ADC0 analog input and baud-rate timer clock output CLKOUT2. |
| 41 | P1.1/ADC1 | bidirectional | P1.1 I/O with ADC1 analog input. |
| 42 | P1.2/ADC2/ECI/RxD2 | bidirectional | P1.2 I/O with ADC2 analog input, PCA external clock ECI and UART2 receive RxD2. |
| 43 | P1.3/ADC3/CCP0/TxD2 | bidirectional | P1.3 I/O with ADC3 analog input, PCA/PWM channel CCP0 and UART2 transmit TxD2. |
| 44 | P1.4/ADC4/SS/CCP1 | bidirectional | P1.4 I/O with ADC4 analog input, SPI SS and PCA/PWM channel CCP1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC power supply (5V MCU) | VDD-VSS | -0.3 | 5.5 | V | 5V MCU | 306 | |
| Storage temperature | TST | -55 | 125 | °C | 306 | ||
| Operating temperature (I) industrial grade | TA | -40 | 85 | °C | Operating Temperature(I) | 306 | |
| Operating voltage | VDD | 3.3 | 5 | 5.5 | V | 5V MCU | 306 |
| Power down current | IPWDN | 0.1 | uA | <0.1 uA printed; 5V | 306 | ||
| Operating current | ICC | 20 | mA | 5V | 306 | ||
| Input low voltage (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 306 | ||
| Input high voltage (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 306 | ||
| Input high voltage (RESET) | VIH2 | 2.2 | V | 5V | 306 | ||
| Sinking current for output low (P0,P1,P2,P3) | IOL1 | 20 | mA | 5V; Vpin=0.45V | 306 | ||
| Sourcing current for output high, quasi-output (P0,P1,P2,P3) | IOH1 | 150 | 230 | uA | 5V | 306 | |
| Sourcing current for output high, push-pull strong-output (P0,P1,P2,P3) | IOH2 | 20 | mA | 5V; Vpin=2.4V | 306 | ||
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | VPIN=0V | 306 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | VPIN=2V | 306 |
CAD (KiCad official)
- Symbol:
STC12C5A56S2-35I - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
stc12c5a56s2-35-etched.step/stc12c5a56s2-35-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5a56s2-35.step/stc12c5a56s2-35.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1543 pp, sha256
7fde44da8887b7a0, retrieved 2026-11-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).