3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV9044IPWR
Texas Instruments · Operational Amplifier · TSSOP-14
TLV9044IPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of channel 1 of the quad op amp. |
| 2 | IN1- | input | Inverting input of channel 1. |
| 3 | IN1+ | input | Non-inverting input of channel 1. |
| 4 | V+ | power_in | Positive (high) power supply; the operating supply range is 1.2 V to 5.5 V, i.e. (V+) - (V-) per Section 6.3. |
| 5 | IN2+ | input | Non-inverting input of channel 2. |
| 6 | IN2- | input | Inverting input of channel 2. |
| 7 | OUT2 | output | Output of channel 2 of the quad op amp. |
| 8 | OUT3 | output | Output of channel 3 of the quad op amp. |
| 9 | IN3- | input | Inverting input of channel 3. |
| 10 | IN3+ | input | Non-inverting input of channel 3. |
| 11 | V- | power_in | Negative (low) power supply or ground for single-supply operation. |
| 12 | IN4+ | input | Non-inverting input of channel 4. |
| 13 | IN4- | input | Inverting input of channel 4. |
| 14 | OUT4 | output | Output of channel 4 of the quad op amp. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -2.25 | 0.6 | 2.25 | mV | 9 | |
| Input offset voltage, TA = -40°C to 125°C | VOS | -2.5 | 2.5 | mV | TA = -40°C 至 125°C | 9 | |
| Input offset voltage drift | dVOS/dT | -0.8 | 0.8 | µV/℃ | TA = -40°C 至 125°C | 9 | |
| Power supply rejection ratio (input offset vs. supply) | PSRR | -100 | 20 | 100 | µV/V | VS = ±0.6V 至 ±2.75V,VCM = V– | 9 |
| Channel isolation | -5.6 | 5.6 | µV/V | f = 10kHz | 9 | ||
| Input bias current | IB | -12 | 1 | 12 | pA | 9 | |
| Input offset current | IOS | -10 | 0.5 | 10 | pA | 9 | |
| Common-mode rejection ratio | CMRR | 60 | 77 | dB | (V–) < VCM < (V+) – 0.7V,VS = 1.2V,TA = -40°C 至 125°C | 9 | |
| Common-mode rejection ratio | CMRR | 75 | 89 | dB | (V–) < VCM < (V+) – 0.7V,VS = 5.5V | 9 | |
| Common-mode rejection ratio | CMRR | 60 | dB | (V–) < VCM < (V+),VS = 1.2V | 9 | ||
| Common-mode rejection ratio | CMRR | 57 | 72 | dB | (V–) < VCM < (V+),VS = 5.5V | 9 | |
| Open-loop voltage gain | AOL | 98 | dB | VS = 1.2V,(V–) + 0.2V < VO < (V+) – 0.2V,RL = 10kΩ 连接至 VS/2,TA = -40°C 至 125°C | 9 | ||
| Open-loop voltage gain | AOL | 125 | dB | VS = 5.5V,(V–) + 0.2V < VO < (V+) – 0.2V,RL = 10kΩ(连接至 VS/2) | 9 | ||
| Open-loop voltage gain | AOL | 105 | dB | VS = 1.2V,(V–) + 0.1V < VO < (V+) – 0.1V,RL = 100kΩ(连接至 VS/2) | 9 | ||
| Open-loop voltage gain | AOL | 107 | 130 | dB | VS = 5.5V,(V–) + 0.1V < VO < (V+) – 0.1V,RL = 100kΩ(连接至 VS/2) | 9 | |
| Positive rail headroom (output swing from V+) | 0.75 | 7 | mV | VS = 1.2V,RL = 100kΩ(连接至 VS/2) | 10 | ||
| Positive rail headroom (output swing from V+) | 10 | 21 | mV | VS = 5.5V,RL = 10kΩ(连接至 VS/2) | 10 | ||
| Positive rail headroom (output swing from V+) | 1 | 8 | mV | VS = 5.5V,RL = 100kΩ(连接至 VS/2) | 10 | ||
| Negative rail headroom (output swing from V-) | 0.75 | 5 | mV | VS = 1.2V,RL = 100kΩ(连接至 VS/2) | 10 | ||
| Negative rail headroom (output swing from V-) | 10 | 21 | mV | VS = 5.5V,RL = 10kΩ(连接至 VS/2) | 10 | ||
| Negative rail headroom (output swing from V-) | 1 | 8 | mV | VS = 5.5V,RL = 100kΩ(连接至 VS/2) | 10 | ||
| Short-circuit current | ISC | -40 | 40 | mA | VS = 5.5V | 10 | |
| Quiescent current per amplifier | IQ | 10 | 13 | µA | VS = 5.5V,IO = 0A | 10 | |
| Quiescent current per amplifier, temperature range | IQ | 13.5 | µA | TA = -40°C 至 125°C | 10 | ||
| Quiescent current, all amplifiers disabled | IQSD | 75 | 200 | nA | 所有放大器均为禁用状态,SHDN = V– | 10 | |
| Junction-to-ambient thermal resistance | RθJA | 135.7 | °C/W | PW (TSSOP), 14 引脚 | 8 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 78.8 | °C/W | PW (TSSOP), 14 引脚 | 8 | ||
| Junction-to-board thermal resistance | RθJB | 63.9 | °C/W | PW (TSSOP), 14 引脚 | 8 | ||
| Junction-to-top characterization parameter | ψJT | 14.2 | °C/W | PW (TSSOP), 14 引脚 | 8 | ||
| Junction-to-board characterization parameter | ψJB | 78.3 | °C/W | PW (TSSOP), 14 引脚 | 8 | ||
| Rated supply voltage range | VS | 1.2 | 5.5 | V | 20 | ||
| Rated operating temperature range | TA | -40 | 125 | °C | 1 |
CAD (KiCad official)
- Symbol:
TLV9044IPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tlv9044ipwr-etched.step/tlv9044ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9044ipwr.step/tlv9044ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (81 pp, sha256
6abdcc66c127ffea, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).