Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL24C08D

Slkor(SLKORMICRO Elec.) · EEPROM · SOP-8

SL24C08D from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect on the SL24C08; the unused A0 address position, which the datasheet says may be left empty or grounded.
2 NC unconnected No connect on the SL24C08; the unused A1 address position, which the datasheet says may be left empty or grounded.
3 A2 input Device address input, the only hardware address pin on the SL24C08, which must match the hardware level and lets 2 devices share the bus.
4 GND power_in Ground reference for the supply.
5 SDA bidirectional Serial data input/output of the I2C bus, which must be pulled up to the supply through a resistor (10kΩ in the typical circuit).
6 SCL input Serial clock input of the I2C bus, supporting 1 MHz at 5V and 400 kHz at 1.8V to 2.7V.
7 WP input Write-protect input, shown in the typical circuit connected to GND or VCC to disable or enable write protection.
8 VCC power_in Supply voltage, 1.8V to 5.5V recommended operating range (absolute maximum -0.3 to +6.5V).

Key specifications

Parameter Value
Manufacturer Slkor(SLKORMICRO Elec.)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.8 5.5 V 2
Operating temperature TA -40 85 °C 2
Storage temperature TSTG -65 150 °C 2
ESD voltage (human body model) VESD 2500 V Human body model 2
ESD voltage (machine model) VESD 200 V Machine model 2
Input low voltage VIL -0.6 0.3 V max = VCC×0.3 3
Input high voltage VIH 0.7 0.5 V min = VCC×0.7, max = VCC+0.5 3
Clock frequency SCL fSCL 400 kHz VCC=1.8V 3
Clock frequency SCL fSCL 1000 kHz VCC=5V 3
Write cycle time tWR 5 ms 1

CAD (KiCad official)

  • Symbol: SL24C08D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sl24c08d-etched.step / sl24c08d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl24c08d.step / sl24c08d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor(SLKORMICRO Elec.) datasheet (14 pp, sha256 92c53c93c0c3a9eb, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF