3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS62122DRVT
Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)
TPS62122DRVT from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin connected to the internal MOSFET switches; connect the inductor to this terminal and do not tie it to VIN, VOUT or GND. |
| 2 | VOUT | input | Must be connected to the output capacitor; the absolute maximum voltage on VOUT is 6 V with respect to GND. |
| 3 | FB | input | Feedback pin for the regulator; connect the external resistor divider to this pin, referenced to the internal 0.8-V reference, with an absolute maximum of 3.6 V. |
| 4 | EN | input | Pulling this pin high activates the device and low shuts it down; it must be terminated and must not be left floating, with a maximum of VIN + 0.3 V but not more than 17 V. |
| 5 | VIN | power_in | VIN power supply pin; operating supply range is 2 V to 15 V, with an absolute maximum of 17 V. |
| 6 | GND | power_in | Ground supply pin for the device; it is the common power ground return for the output capacitor and the small-signal components. |
| 7 | Exposed Thermal Pad | passive | Exposed thermal pad that must be connected to GND and soldered to the PCB for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage at VIN | -0.3 | 17 | V | 4 | |||
| Voltage at SW dynamically during switching | 17 | V | t < 10 µs | 4 | |||
| Voltage at SW pin, static DC | -0.3 | 6 | V | 4 | |||
| Voltage at EN pin | -0.3 | V | Maximum printed as VIN +0.3, but ≤17 | 4 | |||
| Voltage on FB pin | -0.3 | 3.6 | V | 4 | |||
| Voltage at PG, VOUT, SGND | -0.3 | 6 | V | 4 | |||
| Maximum operating junction temperature, TJ | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature, Tstg | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage VIN, device in operation | VIN | 2 | 15 | V | device in operation | 4 | |
| Effective inductance | 10 | 22 | 33 | µH | 4 | ||
| Effective output capacitance | 1 | 2 | 33 | µF | 4 | ||
| Output voltage | VOUT | 1.2 | 5.5 | V | 4 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | unless otherwise noted | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range | VIN | 2 | 15 | V | Device operating | 5 | |
| Quiescent current, device not switching | IQ | 11 | 18 | µA | IOUT = 0 mA, device not switching, EN = VIN, regulator sleeps | 5 | |
| Active mode current consumption | IActive | 240 | 275 | µA | VIN = 5.5 V = VOUT, TJ = 25°C, high-side MOSFET switch fully turned on | 5 | |
| Shutdown current | ISD | 0.3 | 1.2 | µA | EN = GND, VOUT = SW = 0 V, VIN = 3.6 V | 5 | |
| Undervoltage lockout threshold, falling VIN | VUVLO | 1.85 | 1.95 | V | Falling VIN | 5 | |
| Undervoltage lockout threshold, rising VIN | VUVLO | 2.5 | 2.61 | V | Rising VIN | 5 | |
| Threshold for detecting high EN | VIH TH | 0.8 | 1.1 | V | 2 V ≤ VIN ≤ 15 V, rising edge | 5 | |
| Threshold for detecting low EN | VIL TH HYS | 0.4 | 0.6 | V | 2 V ≤ VIN ≤ 15 V, falling edge | 5 | |
| Input bias current, EN | IIN | 0 | 50 | nA | EN = GND or VIN | 5 | |
| High-side MOSFET ON-resistance | RDS(ON) | 2.3 | 3.4 | Ω | VIN = 3.6 V | 5 | |
| High-side MOSFET ON-resistance | RDS(ON) | 1.75 | 2.5 | Ω | VIN = 8 V | 5 | |
| Low-side MOSFET ON-resistance | RDS(ON) | 1.3 | 2.5 | Ω | VIN = 3.6 V | 5 | |
| Low-side MOSFET ON-resistance | RDS(ON) | 1.2 | 1.75 | Ω | VIN = 8 V | 5 | |
| Forward current limit MOSFET high-side | ILIMF | 200 | 250 | 400 | mA | VIN = 8 V, open loop | 5 |
| Feedback FB voltage comparator threshold | -2.5 | 0 | 2.5 | % | Referred to 0.8-V internal reference | 5 | |
| Input bias current FB | IIN | 0 | 50 | nA | VFB = 0.8 V | 5 | |
| Regulator start-up time | tStart | 50 | 150 | µs | Time from active EN to device starts switching, VIN = 2.6 V | 6 | |
| Output voltage ramp time | tRamp | 120 | 300 | µs | VOUT = 1.8 V, no load | 6 | |
| Leakage current into SW pin | ILK_SW | 1 | 1.5 | µA | VOUT = VIN = VSW = 1.8 V, EN = GND, device in shutdown mode | 6 | |
| Leakage into VOUT pin | ILKG | 0 | 50 | nA | V(OUT) = 1.8 V | 6 | |
| Quiescent current, device switching | IQ | 13 | µA | IOUT = 0 mA, device switching, VIN = 8 V, VOUT = 1.8 V | 5 | ||
| Feedback FB voltage line regulation | 0.04 | %/V | IOUT = 50 mA | 5 | |||
| Thermal shutdown | TSD | 150 | °C | Increasing junction temperature | 5 | ||
| Thermal shutdown hysteresis | 20 | °C | Decreasing junction temperature | 5 | |||
| Minimum ON time | tONmin | 700 | ns | VIN = 3.6 V, VOUT = 1.8 V | 5 | ||
| Minimum OFF time | tOFFmin | 60 | ns | VIN = 3.6 V, VOUT = 1.8 V | 5 | ||
| Internal reference voltage | VREF | 0.8 | V | 5 | |||
| Thermal resistance, junction-to-ambient | RθJA | 114.4 | °C/W | DRV [DFN] package, 6 pins | 5 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 73.7 | °C/W | DRV [DFN] package, 6 pins | 5 | ||
| Thermal resistance, junction-to-board | RθJB | 201.9 | °C/W | DRV [DFN] package, 6 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 0.8 | °C/W | DRV [DFN] package, 6 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 94.9 | °C/W | DRV [DFN] package, 6 pins | 5 | ||
| Thermal resistance, junction-to-case (bottom) | RθJC(bot) | 122.7 | °C/W | DRV [DFN] package, 6 pins | 5 |
CAD (KiCad official)
- Symbol:
TPS62122DRVT - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62122drvt-etched.step/tps62122drvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62122drvt.step/tps62122drvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
5132bdb3da13d287, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).