component
TPS92201AMDRVR
Public Made by Adomby adom
TI(德州仪器) , WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS92201AMDRVR
TI(德州仪器) · IC · WSON-6-EP(2x2)
TPS92201AMDRVR from TI(德州仪器), in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PWM | input | PWM dimming input whose duty cycle sets the LED output current (1% to 100% duty, 20 kHz to 200 kHz PWM frequency), with a recommended voltage range of -0.1 V to 6 V and VIH/VIL thresholds of 1 V / 0.7 V. |
| 2 | EN | input | Device enable input: logic high enables the device and logic low disables it into shutdown; it must be terminated and must not be left floating, with a recommended range of -0.1 V to 6 V. |
| 3 | VIN | power_in | Power supply input, 2.5 V to 5.5 V recommended operating range, with an absolute maximum of 6 V. |
| 4 | SW | power_out | Switch node connecting the internal FET switch to the inductor terminal; DC range is -0.3 V to VIN + 0.3 V and 10 ns transients are limited to -3 V to 9 V. |
| 5 | GND | power_in | Power ground for the device. |
| 6 | FB | input | Feedback pin of the internal control loop; an external resistor from this pin to GND sets the LED current (ILED = VFB / RSENSE, with VFB typically 100 mV), with an absolute maximum of 5.5 V. |
| 7 | Thermal pad (EP) | passive | Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | WSON-6-EP(2x2) |
| Category | |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN input voltage range | VIN | 2.5 | 5.5 | V | 5 | ||
| VIN undervoltage lockout, falling | VIN_UVLO | 2.1 | 2.2 | V | Falling VIN | 5 | |
| VIN undervoltage lockout, rising | VIN_UVLO | 2.3 | 2.4 | V | Rising VIN | 5 | |
| Shutdown current into VIN | ISD | 0.1 | 0.5 | µA | VIN = 3.6V, VEN = 0 | 5 | |
| Shutdown current into VIN (M variant, extended temperature) | ISD_ET | 0.1 | 1.75 | µA | VIN = 3.6V, VEN = 0 (TPS92201MDRVR, TPS92201AMDRVR, TPS92201MDRLR, TPS92201AMDRLR) | 5 | |
| Quiescent current into VIN (TPS92201A) | IQ | 520 | 630 | 720 | µA | VIN = 3.6V, VEN = 2V, VFB = 0V, no switching (TPS92201A) | 5 |
| EN high-level threshold voltage | VEN_H | 1.2 | V | 5 | |||
| EN low-level threshold voltage | VEN_L | 0.4 | V | 5 | |||
| PWM high-level threshold voltage | VIH_PWM | 1 | V | 5 | |||
| PWM low-level threshold voltage | VIL_PWM | 0.7 | V | 5 | |||
| Minimum PWM on-time for output current dimming | tPWM_ON | 5 | µS | 5 | |||
| PWM input frequency | fPWM | 20 | 200 | kHz | 5 | ||
| PWM input duty cycle | DPWM | 1 | 100 | % | 5 | ||
| Leakage current, EN pin | ILKG | 1 | µA | VIN = 5.5V, VEN = 5.5V, VPWM = 5.5V | 5 | ||
| Leakage current, PWM pin | ILKG | 0.5 | µA | VIN = 5.5V, VEN = 5.5V, VPWM = 5.5V | 5 | ||
| FB regulation voltage at maximum duty | VFB_REF | 92 | 100 | 104 | mV | PWM = 100%, IOUT = 500mA | 5 |
| FB regulation voltage tolerance at 50% duty, FPWM = 20kHz (nominal 50 mV) | VFB_REF | -8 | 8 | % | PWM = 50%, IOUT = 0mA (TM), FPWM = 20kHz | 5 | |
| FB regulation voltage tolerance at 50% duty, FPWM = 200kHz (nominal 50 mV) | VFB_REF | -10 | 10 | % | PWM = 50%, IOUT = 0mA (TM), FPWM = 200kHz | 5 | |
| High-side FET on-resistance | RHS | 220 | 330 | mΩ | 5 | ||
| Low-side FET on-resistance | RLS | 170 | 300 | mΩ | 5 | ||
| High-side current limit | ILIM_HS | 1.9 | 2.16 | A | 5 | ||
| Input voltage VIN (absolute maximum, VIN, EN, PWM) | VIN, EN, PWM | -0.3 | 6 | V | Measured over operating ambient temperature range unless otherwise noted | 4 | |
| SW pin DC voltage (absolute maximum) | SW | -0.3 | V | DC; printed upper limit is VIN + 0.3 V | 4 | ||
| SW pin AC transient voltage, 10ns (absolute maximum) | SW | -3 | 9 | V | AC, 10ns transient | 4 | |
| FB pin voltage (absolute maximum) | FB | -0.3 | 5.5 | V | 4 | ||
| Operating junction temperature (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN supply voltage (recommended) | VIN | 2.5 | 5.5 | V | 4 | ||
| EN pin voltage (recommended) | VEN | -0.1 | 6 | V | 4 | ||
| PWM pin voltage (recommended) | VPWM | -0.1 | 6 | V | 4 | ||
| Output current (recommended) | IOUT | 1.5 | A | 4 | |||
| Effective inductance (recommended) | L | 2.2 | 4.7 | µH | Effective inductance | 4 | |
| Operating ambient temperature (recommended, general table) | TA | -40 | 85 | °C | 4 | ||
| Operating ambient temperature (M variant, extended range) | TA | -55 | 125 | °C | TPS92201AMDRVR, per electrical characteristics table header | 5 | |
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (WSON-6, DRV) | RθJA | 82.6 | °C/W | DRV (WSON-6) package | 4 | ||
| Junction-to-case (top) thermal resistance (WSON-6, DRV) | RθJC(top) | 106.5 | °C/W | DRV (WSON-6) package | 4 | ||
| Junction-to-board thermal resistance (WSON-6, DRV) | RθJB | 45.8 | °C/W | DRV (WSON-6) package | 4 | ||
| Junction-to-top characterization parameter (WSON-6, DRV) | ψJT | 7.7 | °C/W | DRV (WSON-6) package | 4 | ||
| Junction-to-board characterization parameter (WSON-6, DRV) | ψJB | 45.7 | °C/W | DRV (WSON-6) package | 4 |
CAD (KiCad official)
- Symbol:
TPS92201AMDRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps92201amdrvr-etched.step/tps92201amdrvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92201amdrvr.step/tps92201amdrvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TI(德州仪器) datasheet (30 pp, sha256
dca839c3a941fa2e, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).