component
FCM1005KF-100T05
Public Made by Adomby adom
TAI TECH Ferrite Beads, 0402. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFCM1005KF-100T05
TAI TECH · Ferrite Beads · 0402
FCM1005KF-100T05 from TAI TECH, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TAI TECH |
| Package | 0402 |
| Category | Filters |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated current | 500 | mA | Based on temperature rise test | 1 | |||
| DC resistance | RDC | 0.2 | Ω | 1 | |||
| Operating temperature | -55 | 125 | ℃ | Including self-temperature rise | 2 | ||
| Storage temperature | -55 | 125 | ℃ | On board; transportation and storage | 2 | ||
| Impedance tolerance | Z | -25 | 25 | % | Printed as 10±25% | 1 | |
| Impedance at test frequency | Z | 10 | Ω | Test 60mV/100M (100 MHz) | 1 | ||
| Temperature rise at rated current | 20 | ℃ | Rated current <1 A; applied allowed DC current | 2 | |||
| Impedance change after life test | Z | -15 | 15 | % | 125±2℃, rated current, 1000±12 hrs | 2 | |
| DC resistance change after life test | RDC | -15 | 15 | % | 125±2℃, rated current, 1000±12 hrs | 2 | |
| Impedance change after thermal shock | Z | -15 | 15 | % | -55±2℃ / 125±2℃, 500 cycles | 2 | |
| DC resistance change after thermal shock | RDC | -15 | 15 | % | -55±2℃ / 125±2℃, 500 cycles | 2 | |
| Impedance change after vibration | Z | -15 | 15 | % | 10Hz-2kHz-10Hz, 20 min per cycle, 12 h total | 2 | |
| Impedance change after bending | Z | -10 | 10 | % | FR4 40x100x0.8 mm, bending depth 0.8 mm, 10 s (<0805) | 2 | |
| Impedance change after shock | Z | -10 | 10 | % | Half-sine, 50 g peak, 11 ms | 2 | |
| Impedance change after resistance to soldering heat | Z | -15 | 15 | % | 1 heat cycle, termination fully covered | 3 | |
| Impedance change after terminal strength | Z | -15 | 15 | % | Side force 0.5 kg (<=0805 inch) for 60 s | 3 | |
| Peak package body temperature (Pb-free) | Tp | 260 | ℃ | Pb-free reflow; package thickness <1.6 mm, volume <350 mm3 | 4 | ||
| Reflow ramp-up rate (TL to Tp) | 3 | ℃/s | Pb-free reflow profile | 4 | |||
| Reflow ramp-down rate (Tp to TL) | 6 | ℃/s | Pb-free reflow profile | 4 | |||
| Preheat temperature | 150 | 200 | ℃ | Pb-free reflow profile | 4 | ||
| Preheat time (Tsmin to Tsmax) | ts | 60 | 120 | s | Pb-free reflow profile | 4 | |
| Time above liquidus | tL | 60 | 150 | s | Liquidus temperature TL 217℃ | 4 | |
| Time at classification temperature | tp | 30 | s | Tc-5 ℃ (Tp ≤ Tc) | 4 | ||
| Time 25 ℃ to peak temperature | 8 | min | Pb-free reflow profile | 4 | |||
| Reflow times | 3 | times | Reflow soldering | 4 | |||
| Soldering iron tip temperature | 350 | ℃ | Iron soldering; tip diameter 1.0 mm max, 20 W iron | 4 | |||
| Storage temperature (component level) | 40 | ℃ | To maintain solderability of terminal electrodes | 6 | |||
| Storage humidity (component level) | 60 | %RH | To maintain solderability of terminal electrodes | 6 | |||
| Recommended use period after delivery | 12 | months | From time of delivery | 6 | |||
| Cover tape tearing force | 15 | 60 | g | Tearing speed 300 mm/min; 5-35 ℃, 45-85 %RH | 6 |
CAD (KiCad official)
- Symbol:
FCM1005KF-100T05 - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
fcm1005kf-100t05-etched.step/fcm1005kf-100t05-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fcm1005kf-100t05.step/fcm1005kf-100t05.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TAI TECH datasheet (6 pp, sha256
614bb49451e327f1, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).