Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACPL-M72T-000E

Broadcom/AVAGO · Logic Output Optocoupler · SOIC-5

ACPL-M72T-000E from Broadcom/AVAGO, in a SOIC-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ANODE input LED anode (input side). The p.1 block diagram labels it Anode.
3 CATHODE input LED cathode (input side). The p.1 block diagram labels it Cathode.
4 GND power_in Output-side ground. A 0.1 uF bypass capacitor must be connected between pins 4 and 6 (p.1 note). The p.1 block diagram labels it Gnd.
5 VOUT output CMOS output: high with the LED off, low with the LED on (p.1 truth table). The p.1 block diagram labels it Vo.
6 VCC power_in Output-side supply. The p.1 block diagram labels it Vdd.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package SOIC-5
Category Optocouplers/Photocouplers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 130 °C 5
Ambient Operating Temperature TA -40 125 °C 5
Supply Voltage VDD 0 6.5 V 5
Output Voltage VO -0.5 V max printed as VDD +0.5 5
Average Forward Input Current IF 20 mA 5
Peak Transient Input Current IF(TRAN) 1 A <1 µs Pulse Width, 300 pps 5
Peak Transient Input Current IF(TRAN) 80 mA <1 µs Pulse Width, <10% Duty Cycle 5
Reverse Input Voltage Vr 5 V 5
Input Power Dissipation PI 40 mW 5
Output Power Dissipation Po 30 mW 5
Lead Solder Temperature 260 °C 10 sec., 1.6 mm below seating plane 5
Ambient Operating Temperature TA -40 125 °C 5
Supply Voltage VDD 3 5.5 V 5
Forward Input Current IF(ON) 4 15 mA 5
Forward Off State Voltage VF(OFF) 0.8 V 5
Input Threshold Current ITH 3.5 mA 5
Input Capacitance CIN 90 pF 6
Input Reverse Breakdown Voltage BVR 5 V IR = 10 µA 6
Logic Low Output Voltage VOL 0.6 V IOL = 4mA 6
Logic Low Output Supply Current IDDL 0.9 1.5 mA 6
Logic High Output Supply Current IDDH 0.9 1.5 mA 6
LED Forward Voltage Vf 1.45 1.5 1.75 V IF=10mA, Ta=25°C 6
LED Forward Voltage Vf 1.25 1.5 1.85 V IF=10mA, Ta= -40°C ~ 125°C 6
Vf Temperature Coefficient -1.5 mV/°C 6
Propagation Delay Time to Logic Low Output tPHL 60 100 ns IF=4mA, CL=15pF 7
Propagation Delay Time to Logic High Output tPLH 35 100 ns IF=4mA, CL=15pF 7
Pulse Width Distortion PWD 25 50 ns IF=4mA, CL=15pF 7
Propagation Delay Skew tPSK 60 ns IF=4mA, CL=15pF 7
Output Rise Time (10%, 90%) tR 10 ns IF=4mA, CL=15pF 7
Output Fall Time (90% - 10%) tF 10 ns IF=4mA, CL=15pF 7
Common Mode Transient Immunity at Logic High Output /CMH/ 25 40 kV/µs Using Avago LED Driving Circuit, VIN=0V, R1=350Ω+/-5%, R2=350Ω+/-5%, VCM=1000V, TA=25°C 7
Common Mode Transient Immunity at Logic Low Output /CML/ 25 40 kV/µs Using Avago LED Driving Circuit, VIN=4.5-5.5V, R1=350Ω+/-5%, R2=350Ω, VCM=1000V, TA=25°C 7
Input-Output Momentary Withstand Voltage VISO 4000 Vrms RH ≤ 50%, t = 1 min., TA = 25°C 7
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz, TA = 25°C 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs Insulation Resistance at TS, VIO = 500 V RIO ≥109 Ω Absolute Maximum Ratings 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ACPL-M72T-000E
  • Footprint: Package_SO:SOIC-5-6_4.4x3.6mm_P1.27mm
  • 3D model: SOIC-5, generated on the KiCad land (body 4.4 x 3.6 mm, terminals on the pads, 2.5 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: acpl-m72t-000e-etched.step / acpl-m72t-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acpl-m72t-000e.step / acpl-m72t-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (12 pp, sha256 9d2707c71e7558cc, retrieved 2026-11-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF