component
eg3002
Public Unreviewedby Ray
EG Micro Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownEG3002
EG Micro · Isolators - Gate Drivers · SOP-8
EG3002 from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCP- | input | Inverting input of the internal fast comparator. Used with VCP+ to sense a current-shunt voltage for short-circuit / overcurrent protection; when VCP- > VCP+ the driver output follows IN, when VCP- < VCP+ the output is forced low. Input range -0.3V to VCC+0.3V. |
| 2 | VCP+ | input | Non-inverting input of the internal fast comparator. Typically tied to a reference (~0.1V) for shunt-based overcurrent sensing. Input range -0.3V to VCC+0.3V; input offset voltage ~1mV typ (10mV max), bias current ~0.3µA typ. |
| 3 | IN | input | Logic drive input controlling turn-on/turn-off of the external power MOSFET. High (VIH ≥ 2.5V, typ 5V, up to 30V) turns the MOSFET on; low (VIL ≤ 1.0V) turns it off. Input current ~200µA typ at Vin=5V (logic 1), ~0µA at logic 0. Absolute range -0.3V to VCC+0.3V (pin tolerates up to +30V per features list). |
| 4 | SD | input | Shutdown / output-disable control. Logic '0' enables the driver output; logic '1' forces the output low and disables the driver. Implements cycle-by-cycle shutdown for short-circuit / overcurrent protection: after a shutdown, the output stays off until IN transitions low-to-high again. VIH ≥ 2.5V, VIL ≤ 1.0V; input current ~210µA typ at 5V. |
| 5 | GND | power_in | Common ground for input and output stages. Must be routed close to the source terminal of the driven MOSFET to minimize gate-loop inductance. |
| 6 | OUTS | output | Sink (pull-down) driver output for the external MOSFET gate. Sinks up to 1.2A peak (PW ≤ 10µs). Typically tied to OUTD through a turn-off resistor to independently set the MOSFET gate fall time. Absolute range -0.3V to 35V. |
| 7 | OUTD | output | Source (pull-up) driver output for the external MOSFET gate. Sources up to 1A peak (PW ≤ 10µs). Typically tied to OUTS through a turn-on resistor to independently set the MOSFET gate rise time. Absolute range -0.3V to 35V. |
| 8 | Vcc | power_in | Chip supply and MOSFET gate-drive supply. Operating range 3V-30V (recommended 8V-20V for driving N-channel power MOSFETs); absolute max 35V. Quiescent current ~2mA typ (3.5mA max) at 12V with input floating. Bypass with a local ceramic (and bulk) capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
EG3002 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (None pp, sha256
713fe883f81686f0, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).