Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM5006MM

Texas Instruments · DC-DC Converters · MSOP-10

LM5006MM from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node connected to output inductor, freewheeling diode/synchronous rectifier FET, and bootstrap capacitor.
2 BST output Bootstrap capacitor connection (0.01μF minimum ceramic) charged from VCC through internal diode when SW is low.
3 LG output Low-side gate driver output (250mA source, 300mA sink peak) driving external N-channel MOSFET for synchronous rectification.
4 RTN power_in Ground reference for entire circuit.
5 UV input Under-voltage input pin (maximum 5V) with programmable detection threshold at 2.5V and internal 5μA hysteresis current source.
6 UVO tri_state Open-drain under-voltage output indicator (10V maximum) pulled low when UV below 2.5V or when shutdown/UVLO functions invoked.
7 FB input Feedback input (maximum 5V) to regulation comparator negative input with 2.5V internal reference.
8 RT/SD input On-time setting input (via series resistor to VIN) and shutdown input; minimum 200ns on-time recommended at maximum input voltage.
9 VCC power_out Regulated 7.5V output (current limit approximately 30mA) from internal series regulator supplying gate driver and control circuits; requires 1μF ceramic bypass capacitor.
10 VIN power_in Input voltage supply with operating range of 6V to 75V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10
Category Power Management (PMIC)
Pins 10

CAD (KiCad official)

  • Symbol: LM5006MM
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: lm5006mm-etched.step / lm5006mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5006mm.step / lm5006mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 007c90408ebfc48e, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF