component
L9966CB
Public Made by Adomby adom
STMicroelectronics ADC/DAC - Specialized, TQFP-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownL9966CB-TR
STMicroelectronics · ADC/DAC - Specialized · TQFP-48-EP(7x7)
L9966CB-TR from STMicroelectronics, in a TQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RR3 | passive | Reference pullup resistor 3 for R-measurement. |
| 2 | RR2 | passive | Reference pullup resistor 2 for R-measurement. |
| 3 | RR1 | passive | Reference pullup resistor 1 for R-measurement. |
| 4 | R_GND | power_in | Reference ground for high accuracy signals, the ground reference for ADC1, ADC2, the VDD5REF voltage divider and the input channel voltage dividers; if its PCB connection to ground is lost, R_GND sits one diode voltage drop above GND. |
| 5 | VRSP | input | Positive variable reluctance sensor input. |
| 6 | VRSN | input | Negative variable reluctance sensor input. |
| 7 | GND | power_in | Ground for supply voltage. |
| 8 | VDD5REF | power_out | Positive reference to both ADCs, generated from the 5 V reference divider. |
| 9 | AOX | output | Analog output for input channel x. |
| 10 | VT5V | output | Ratiometric voltage output of the VI5V input channel. |
| 11 | VRS_Out | output | Digital output of the variable reluctance sensor. |
| 12 | VI5V | input | Input voltage pin for the VI5V input channel. |
| 13 | nc | unconnected | Not connected. |
| 14 | VTX | output | Ratiometric voltage output of the VIX input channel. |
| 15 | VIX | input | Input voltage pin for the VIX input channel. |
| 16 | CTRL_CFG | input | Input to control the current source and configuration input that selects the SPI address mux during reset. |
| 17 | IO_13 | bidirectional | Flexible input and current output 13. |
| 18 | IO_14 | bidirectional | Flexible input and current output 14. |
| 19 | IO_15 | bidirectional | Flexible input and current output 15. |
| 20 | IO_1 | bidirectional | Flexible input and current output 1, also providing SENT1 functionality. |
| 21 | IO_2 | bidirectional | Flexible input and current output 2, also providing SENT2 functionality. |
| 22 | IO_3 | bidirectional | Flexible input and current output 3, also providing SENT3 functionality. |
| 23 | IO_4 | bidirectional | Flexible input and current output 4, also providing SENT4 functionality. |
| 24 | nc | unconnected | Not connected. |
| 25 | SENT4_GTM4 | output | Digital output for SENT channel 4, also GTM_TO_SENT_4. |
| 26 | SENT3_GTM3 | output | Digital output for SENT channel 3, also GTM_TO_SENT_3. |
| 27 | SENT2_GTM2 | output | Digital output for SENT channel 2, also GTM_TO_SENT_2. |
| 28 | SENT1_GTM1 | output | Digital output for SENT channel 1, also GTM_TO_SENT_1. |
| 29 | INT | output | Interrupt output signaling result status to the controller. |
| 30 | VDD5V | power_in | 5 V power supply. |
| 31 | SYNC | input | Digital input to synchronize the sequencer start. |
| 32 | MISO | output | Communication interface line for Master-IN/Slave-OUT, as labelled in the datasheet table. |
| 33 | MOSI | input | Communication interface line for Master-OUT/Slave-IN. |
| 34 | CS | input | Communication interface chip select. |
| 35 | SCLK | input | Communication interface clock. |
| 36 | RST | input | Reset input. |
| 37 | nc | unconnected | Not connected. |
| 38 | nc | unconnected | Not connected. |
| 39 | IO_12 | bidirectional | Flexible input and current output 12, also providing LAMBDA functionality. |
| 40 | IO_11 | bidirectional | Flexible input and current output 11, also providing LAMBDA functionality. |
| 41 | IO_10 | bidirectional | Flexible input and current output 10, also providing LAMBDA functionality. |
| 42 | IO_9 | bidirectional | Flexible input and current output 9, also providing LAMBDA functionality. |
| 43 | IO_8 | bidirectional | Flexible input and current output 8. |
| 44 | IO_7 | bidirectional | Flexible input and current output 7. |
| 45 | IO_6 | bidirectional | Flexible input and current output 6. |
| 46 | IO_5 | bidirectional | Flexible input and current output 5. |
| 47 | WAKE | output | Output for wake-up. |
| 48 | UBSW | power_in | Battery supply pin; the operating battery supply voltage is 5.5 V to 36 V. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TQFP-48-EP(7x7) |
| Category | Data Converters |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating battery supply voltage (UBSW) | 5.5 | 36 | V | Features: 12 V and 24 V systems compatible, operating battery supply voltage | 1 | ||
| Thermal resistance junction-to-case | Rth(j-c) | 3 | K/W | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
L9966CB-TR - Footprint:
Package_QFP:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm - 3D model: TQFP-48-EP(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 1.2 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
l9966cb-etched.step/l9966cb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l9966cb.step/l9966cb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (11 pp, sha256
4f88ce18becc3b1a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).