3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISO7231CQDWRQ1
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7231CQDWRQ1 from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Side 1 supply voltage, 3.15 V to 5.5 V, with a 0.1 µF bypass capacitor placed close to the pin. |
| 2 | GND1 | power_in | Ground connection for side 1 (VCC1). |
| 3 | INA | input | Channel A logic input on side 1 with a TTL threshold, 5-V tolerant when supplied from 3.3 V. |
| 4 | INB | input | Channel B logic input on side 1 with a TTL threshold, 5-V tolerant when supplied from 3.3 V. |
| 5 | OUTC | tri_state | Channel C output on side 1, 4 mA CMOS, driven by INC and placed in high impedance when EN1 is low. |
| 6 | NC | unconnected | No internal connection. |
| 7 | EN1 | input | Active-high output enable for side 1, with the output in high impedance when driven low, and output enabled when high or open. |
| 8 | GND1 | power_in | Ground connection for side 1 (VCC1). |
| 9 | GND2 | power_in | Ground connection for side 2 (VCC2). |
| 10 | EN2 | input | Active-high output enable for side 2, with the outputs in high impedance when driven low, and outputs enabled when high or open. |
| 11 | NC | unconnected | No internal connection. |
| 12 | INC | input | Channel C logic input on side 2 with a TTL threshold, 5-V tolerant when supplied from 3.3 V. |
| 13 | OUTB | tri_state | Channel B output on side 2, 4 mA CMOS, driven by INB and placed in high impedance when EN2 is low. |
| 14 | OUTA | tri_state | Channel A output on side 2, 4 mA CMOS, driven by INA and placed in high impedance when EN2 is low. |
| 15 | GND2 | power_in | Ground connection for side 2 (VCC2). |
| 16 | VCC2 | power_in | Side 2 supply voltage, 3.15 V to 5.5 V, with a 0.1 µF bypass capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VCC1, VCC2 | VCC | -0.5 | 6 | V | 3 | ||
| Voltage at IN, OUT, EN | VI | -0.5 | 6 | V | 3 | ||
| Output current | IO | -15 | 15 | mA | 3 | ||
| ESD Human Body Model, all pins | -4 | 4 | kV | All pins | 3 | ||
| ESD Field-Induced-Charged Device Model | -1 | 1 | kV | 3 | |||
| Maximum junction temperature | TJ | 150 | °C | 3 | |||
| Supply voltage, VCC1, VCC2 (recommended) | VCC | 3.15 | 5.5 | V | 5-V operation: 4.5 to 5.5 V; 3-V operation: 3.15 to 3.6 V | 3 | |
| High-level output current | IOH | -4 | mA | 3 | |||
| Low-level output current | IOL | 4 | mA | 3 | |||
| Input pulse width | tui | 40 | ns | 3 | |||
| Signaling rate | 1/tui | 0 | 30 | 25 | Mbps | Typical under ideal conditions at 25°C (footnote 1) | 3 |
| High-level input voltage (IN) | VIH | 2 | V | EN on all devices | 3 | ||
| Low-level input voltage (IN) | VIL | 0 | 0.8 | V | EN on all devices | 3 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 3 | ||
| Quiescent supply current ICC1 (3.3-V operation) | ICC1 | 4.5 | 7 | mA | 3.3-V operation; VI = VCC or 0 V, all channels, no load, EN1 at 3 V, EN2 at 3 V | 6 | |
| ICC1 at 25 Mbps (3.3-V operation) | ICC1 | 6.5 | 11 | mA | 3.3-V operation; 25 Mbps | 6 | |
| Quiescent supply current ICC2 (3.3-V operation) | ICC2 | 8 | 12 | mA | 3.3-V operation; VI = VCC or 0 V, all channels, no load, EN1 at 3 V, EN2 at 3 V | 6 | |
| ICC2 at 25 Mbps (3.3-V operation) | ICC2 | 10.5 | 16 | mA | 3.3-V operation; 25 Mbps | 6 | |
| Sleep mode output current (3.3-V operation) | IOFF | 0 | μA | 3.3-V operation; EN at 0 V, single channel | 6 | ||
| Low-level output voltage (3.3-V operation) | VOL | 0.4 | V | 3.3-V operation; IOL = 4 mA, See Figure 5-1 | 6 | ||
| Low-level output voltage (3.3-V operation) | VOL | 0.1 | V | 3.3-V operation; IOL = 20 μA, See Figure 5-1 | 6 | ||
| High-level input current (3.3-V operation) | IIH | 10 | μA | 3.3-V operation; IN from 0 V or VCC | 6 | ||
| Low-level input current (3.3-V operation) | IIL | -10 | μA | 6 | |||
| Common-mode transient immunity (3.3-V operation) | CMTI | 25 | 50 | kV/μs | 3.3-V operation; VI = VCC or 0 V, See Figure 5-4 | 6 | |
| Quiescent supply current ICC1 (5-V operation) | ICC1 | 6.5 | 11 | mA | 5-V operation; VI = VCC or 0 V, All channels, no load, EN1 at 3 V, EN2 at 3 V | 7 | |
| ICC1 at 25 Mbps (5-V operation) | ICC1 | 11 | 17 | mA | 5-V operation; 25 Mbps | 7 | |
| Quiescent supply current ICC2 (5-V operation) | ICC2 | 13 | 20 | mA | 5-V operation; VI = VCC or 0 V, All channels, no load, EN1 at 3 V, EN2 at 3 V | 7 | |
| ICC2 at 25 Mbps (5-V operation) | ICC2 | 17.5 | 27 | mA | 5-V operation; 25 Mbps | 7 | |
| Sleep mode output current (5-V operation) | IOFF | 0 | μA | 5-V operation; EN at 0 V, Single channel | 7 | ||
| Low-level output voltage (5-V operation) | VOL | 0.4 | V | 5-V operation; IOL = 4 mA, See Figure 5-1 | 7 | ||
| Low-level output voltage (5-V operation) | VOL | 0.1 | V | 5-V operation; IOL = 20 μA, See Figure 5-1 | 7 | ||
| High-level input current (5-V operation) | IIH | 10 | μA | 5-V operation; IN from 0 V to VCC | 7 | ||
| Low-level input current (5-V operation) | IIL | -10 | μA | 7 | |||
| Common-mode transient immunity (5-V operation) | CMTI | 25 | 50 | kV/μs | 5-V operation; VI = VCC or 0 V, See Figure 5-4 | 7 | |
| Propagation delay tPLH, tPHL (3.3-V operation) | tPLH, tPHL | 25 | 56 | ns | 3.3-V operation; See Figure 5-1 | 9 | |
| Pulse-width distortion (3.3-V operation) | PWD | 4 | ns | 9 | |||
| Part-to-part skew (3.3-V operation) | tsk(pp) | 10 | ns | 9 | |||
| Channel-to-channel output skew (3.3-V operation) | tsk(o) | 0 | 4 | ns | 9 | ||
| Propagation delay, high-level-to-high-impedance output (3.3-V operation) | tPHZ | 15 | 25 | ns | 3.3-V operation; See Figure 5-2 | 9 | |
| Propagation delay, high-impedance-to-high-level output (3.3-V operation) | tPZH | 15 | 25 | ns | 3.3-V operation; See Figure 5-2 | 9 | |
| Propagation delay, low-level-to-high-impedance output (3.3-V operation) | tPLZ | 15 | 25 | ns | 3.3-V operation; See Figure 5-2 | 9 | |
| Propagation delay, high-impedance-to-low-level output (3.3-V operation) | tPZL | 15 | 25 | ns | 3.3-V operation; See Figure 5-2 | 9 | |
| Failsafe output delay time from input power loss (3.3-V operation) | tfs | 18 | μs | 3.3-V operation; See Figure 5-3 | 9 | ||
| Propagation delay tPLH, tPHL (5-V operation) | tPLH, tPHL | 18 | 45 | ns | 5-V operation; See Figure 5-1 | 9 | |
| Pulse-width distortion (5-V operation) | PWD | 5 | ns | 9 | |||
| Part-to-part skew (5-V operation) | tsk(pp) | 8 | ns | 9 | |||
| Channel-to-channel output skew (5-V operation) | tsk(o) | 0 | 4 | ns | 9 | ||
| Propagation delay, high-level-to-high-impedance output (5-V operation) | tPHZ | 15 | 25 | ns | 5-V operation; See Figure 5-2 | 9 | |
| Propagation delay, high-impedance-to-high-level output (5-V operation) | tPZH | 15 | 25 | ns | 5-V operation; See Figure 5-2 | 9 | |
| Propagation delay, low-level-to-high-impedance output (5-V operation) | tPLZ | 15 | 25 | ns | 5-V operation; See Figure 5-2 | 9 | |
| Propagation delay, high-impedance-to-low-level output (5-V operation) | tPZL | 15 | 25 | ns | 5-V operation; See Figure 5-2 | 9 | |
| Failsafe output delay time from input power loss (5-V operation) | tfs | 12 | μs | 5-V operation; See Figure 5-3 | 9 | ||
| Junction-to-air thermal resistance, Low-K | θJA | 168 | °C/W | Low-K thermal resistance per EIA/JESD51-3 | 3 | ||
| Junction-to-air thermal resistance, High-K | θJA | 68.6 | °C/W | High-K thermal resistance per EIA/JESD51-3 | 3 | ||
| Junction-to-board thermal resistance | θJB | 33.5 | °C/W | 3 | |||
| Junction-to-case thermal resistance | θJC | 33.9 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
ISO7231CQDWRQ1 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7231cqdwrq1-etched.step/iso7231cqdwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7231cqdwrq1.step/iso7231cqdwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
3eff23870a035eea, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).