component
COSTLV9001TR
Public Made by Adomby adom
COSINE Operational Amplifier, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCOSTLV9001TR
COSINE · Operational Amplifier · SOT23-5
COSTLV9001TR from COSINE, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the output voltage range extends to within millivolts of each supply rail. |
| 2 | -Vs | power_in | Negative power supply or ground; if not connected to ground, bypass with a 0.1µF capacitor placed as close to the part as possible. |
| 3 | +IN | input | Non-inverting input of the amplifier, with the same voltage range as -IN (-Vs -0.3V to +Vs +0.3V). |
| 4 | -IN | input | Inverting input of the amplifier; voltage range can go from -Vs -0.3V to +Vs +0.3V. |
| 5 | +Vs | power_in | Positive power supply (1.8V to 7.0V); place a 0.1µF bypass capacitor as close to the part as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOT23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (COSTLV900xA) | VOS | -2 | 0.4 | 2 | mV | +VS=+5V, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | 4 |
| Common-Mode Voltage Range | VCM | -0.1 | 5.6 | V | VS = 5.5V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 125 | dB | VCM =0.1V to 4.9V | 4 | ||
| Open-Loop Voltage Gain | AOL | 120 | dB | VO=0.2V to 4.8V | 4 | ||
| Output Voltage Swing from Rail | 1 | mV | RL=100kΩ | 4 | |||
| Output Voltage Swing from Rail | 8 | mV | RL=10kΩ | 4 | |||
| Output Voltage Swing from Rail | 40 | mV | RL=2kΩ | 4 | |||
| Operating Voltage Range | 1.8 | 7 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | VS = +1.8V to +5.5V | 4 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | -0.6 | 0.6 | μV/°C | -40 to 125°C | 4 | |
| Input Bias Current | IB | -2.5 | 2.5 | pA | 4 | ||
| Input Offset Current | IOS | -2.5 | 2.5 | pA | 4 | ||
| Power Supply: +Vs to -Vs | 7.5 | V | 3 | ||||
| Input Voltage | -0.5 | 0.5 | V | Relative to rails: -Vs -0.5V to +Vs +0.5V | 3 | ||
| Input Current | 10 | mA | Note 2: input signals >0.5V beyond supply rails should be current-limited | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Operating Temperature Range | -40 | 125 | °C | 3 | |||
| ESD Susceptibility, HBM | 2000 | V | HBM | 3 | |||
| DC Supply Voltage | 1.8 | 7 | V | 3 | |||
| Operating Ambient Temperature | -40 | 85 | °C | 3 | |||
| Short-Circuit Current Sourcing | ISR | 21 | mA | 4 | |||
| Short-Circuit Current Sinking | ISK | 22 | mA | 4 | |||
| Quiescent Current / Amplifier | IQ | 60 | μA | IO = 0 mA | 4 | ||
| Shutdown mode current | 5 | μA | Shutdown mode | 4 | |||
| Gain Bandwidth Product | GBWP | 1.5 | MHz | G=+1 | 4 | ||
| Slew Rate | SR | 0.8 | V/μs | G = +1, 2V Output Step | 4 | ||
| Voltage Noise Density | en | 40 | nV/√Hz | f=1kHz | 4 | ||
| Package Thermal Resistance, junction-to-ambient | RθJA | 190 | °C/W | SOT23-5 package | 3 |
CAD (KiCad official)
- Symbol:
COSTLV9001TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
costlv9001tr-etched.step/costlv9001tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);costlv9001tr.step/costlv9001tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (10 pp, sha256
d0fe1b0910f011b3, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).