Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP38512TJ-ADJ

Texas Instruments · Linear Voltage Regulators (LDO) · TO-263-5

LP38512TJ-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin: pull high to enable the output and low to disable it; it has no internal bias and must be tied to the input voltage or actively driven, with Enable input voltage rated 0.0V to 5.5V.
2 IN power_in Input supply pin, with input supply voltage range 2.25V to 5.5V, and a ceramic input capacitor of at least 10 µF required.
3 GND power_in Ground pin for the device, which should be connected to the ground plane; the exposed DAP is not internally connected to this ground.
4 OUT power_out Regulated output voltage pin, delivering 1 mA to 1.5A DC, which requires a ceramic output capacitor of at least 10 µF located less than 1 cm from the device.
5 ADJ input Feedback input to the internal error amplifier that sets the output voltage via VOUT = VADJ x (1 + R1/R2), with ADJ pin survival voltage -0.3V to +6.0V.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VADJ Accuracy VADJ 495 500 505 mV 2.25V ≤ VIN ≤ 5.5V 3
VADJ Accuracy VADJ 490 510 mV 10 mA ≤ IOUT ≤ 1.5A 3
Dropout Voltage VDO 300 mV IOUT = 1.5A 3
Ground Pin Current, Output Enabled IGND 10 12 mA IOUT = 10 mA 4
Ground Pin Current, Output Enabled IGND 15 mA IOUT = 10 mA 4
Ground Pin Current, Output Enabled IGND 14 mA IOUT = 1.5A 4
Ground Pin Current, Output Disabled IGND 60 100 µA VEN = 0.50V 4
Ground Pin Current, Output Disabled IGND 110 µA VEN = 0.50V 4
Enable ON Voltage Threshold VEN(ON) 0.9 1.2 1.5 V VEN rising from < VEN(OFF) until VOUT = ON 4
Enable ON Voltage Threshold VEN(ON) 0.8 1.6 V VEN rising from < VEN(OFF) until VOUT = ON 4
Enable OFF Voltage Threshold VEN(OFF) 0.6 1 1.4 V VEN falling from > VEN(ON) until VOUT = OFF 4
Enable OFF Voltage Threshold VEN(OFF) 0.5 1.5 V VEN falling from > VEN(ON) until VOUT = OFF 4
Input Supply Voltage VIN 2.25 5.5 V 3
Output Voltage VOUT 5 V 3
Enable Input Voltage VEN 0 5.5 V 3
Output Current (DC) lower limit IOUT 1 mA 3
Output Current (DC) upper limit IOUT 1.5 A 3
Junction Temperature TJ -40 125 °C 3
Storage Temperature Range -65 150 °C 3
Soldering Temperature 260 °C 10 s, PFM package 3
ESD Rating -2 2 kV Human body model 3
Input Pin Voltage (Survival) -0.3 6 V 3
Enable Pin Voltage (Survival) -0.3 6 V 3
Output Pin Voltage (Survival) -0.3 6 V 3
ADJ Pin Voltage (Survival) -0.3 6 V 3
Thermal Resistance Junction to Ambient θJ-A 67 °C/W PFM package 4
Thermal Resistance Junction to Case θJ-C 3 °C/W PFM package 4

CAD (KiCad official)

  • Symbol: LP38512TJ-ADJ
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: lp38512tj-adj-etched.step / lp38512tj-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp38512tj-adj.step / lp38512tj-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 bbcd0f53f3690742, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF