component
LMP7711MK
Public Made by Adomby adom
Texas Instruments Precision Op Amps, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMP7711MK
Texas Instruments · Precision Op Amps · TSOT-23-6
LMP7711MK from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings to within about 22 to 32 mV of either rail with a 2 kΩ load and can source up to 46 mA and sink up to 10.5 mA at 5 V (typical values from the 5 V electrical characteristics). |
| 2 | V- | power_in | Negative supply rail, referenced as 0 V in the 5 V test conditions (V- = 0 V). |
| 3 | +IN | input | Non-inverting amplifier input, with CMOS input stage and typical input bias current of 100 fA. |
| 4 | -IN | input | Inverting amplifier input, with CMOS input stage and typical input bias current of 100 fA. |
| 5 | V+ | power_in | Positive supply rail; the supply voltage range is 1.8 V to 5.5 V. |
| 6 | EN | input | Enable pin: amplifier is enabled when VEN is at or above 4.6 V and placed in shutdown when VEN is at or below 0.4 V, where supply current drops to about 0.14 μA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LMP7711MK - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmp7711mk-etched.step/lmp7711mk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmp7711mk.step/lmp7711mk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
6c11c68131c01f7f, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).