component
SY6288T
Public Made by Adomby adom
Wuxi Maxinmicro Power Distribution Switches, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSY6288T
Wuxi Maxinmicro · Power Distribution Switches · SOT-23-5
SY6288T from Wuxi Maxinmicro, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Switch output pin, the source of the output P-MOSFET, which must be connected to the load; the switch turns off when VOUT rises above VIN (reverse-voltage protection). |
| 2 | GND | power_in | Ground pin, which should be connected to a strong ground plane to act as the heat sink. |
| 3 | ILIM | passive | Current-limit set pin, where an external resistor RILIM sets the limit as ILIM = 6800/RILIM, with a recommended 1% range of 2.5kΩ ≤ RILIM ≤ 17kΩ. |
| 4 | EN | input | High-enable input that must be driven to a defined logic high or logic low and must not be left floating. |
| 5 | IN | power_in | Power input pin that supplies the internal logic and the drain of the output MOSFET, with an input voltage range of 2.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi Maxinmicro |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
SY6288T - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sy6288t-etched.step/sy6288t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy6288t.step/sy6288t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi Maxinmicro datasheet (11 pp, sha256
4e730cae7100f7ea, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).