Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74LS163AN

Texas Instruments · Counters / Dividers · DIP-16

SN74LS163AN from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLR input Active-low clear that, on the 'LS163A, is synchronous: a low level sets all four flip-flop outputs low after the next clock pulse regardless of the enable inputs.
2 CLK input Buffered clock input that triggers the four flip-flops on its rising edge.
3 A input Data input A, the least-significant preset bit, loaded to output QA when LOAD is low and a clock pulse occurs.
4 B input Data input B, loaded to output QB when LOAD is low and a clock pulse occurs.
5 C input Data input C, loaded to output QC when LOAD is low and a clock pulse occurs.
6 D input Data input D, the most-significant preset bit, loaded to output QD when LOAD is low and a clock pulse occurs.
7 ENP input Count-enable input P; both ENP and ENT must be high for the counter to count.
8 GND power_in Ground terminal; voltage values are with respect to this network ground terminal.
9 LOAD input Active-low synchronous load: a low level disables the counter and makes the outputs agree with the data inputs after the next clock pulse regardless of the enable inputs.
10 ENT input Count-enable input T; it must be high for counting and is fed forward to enable the ripple carry output RCO.
11 QD output Flip-flop output D, the most-significant bit of the 4-bit binary count.
12 QC output Flip-flop output C of the 4-bit binary count.
13 QB output Flip-flop output B of the 4-bit binary count.
14 QA output Flip-flop output A, the least-significant bit of the 4-bit binary count.
15 RCO output Ripple carry output that gives a high-level pulse, approximately equal in duration to the high-level portion of QA, when the counter is enabled and at maximum count (15); used to enable cascaded stages.
16 VCC power_in Positive supply voltage terminal.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-16
Category Logic ICs
Pins 16

CAD (KiCad official)

  • Symbol: SN74LS163AN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74ls163an-etched.step / sn74ls163an-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74ls163an.step / sn74ls163an.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 0ea50a72dfbd95c3, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF