3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC12C671-04I
Microchip Tech · Pre-ordered MCUs · PDIP-8
PIC12C671-04I from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins. |
| 2 | GP5/OSC1/CLKIN | bidirectional | Bi-directional I/O port, oscillator crystal input, or external clock source input; GPIO in INTRC mode only, OSC1 in all other oscillator modes, with Schmitt trigger input for EXTRC oscillator mode. |
| 3 | GP4/OSC2/AN3/CLKOUT | bidirectional | Bi-directional I/O port, oscillator crystal output (HS, XT and LP modes only), or analog input 3; in EXTRC and INTRC modes the pin can be configured as CLKOUT, which has 1/4 the frequency of OSC1. |
| 4 | GP3/MCLR/VPP | input | Input port, active-low master clear (reset) input when configured as MCLR, or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal device operation, and the weak pull-up is always on when configured as MCLR. |
| 5 | GP2/T0CKI/AN2/INT | bidirectional | Bi-directional I/O port and analog input 2 that can be configured as the T0CKI timer input or the external interrupt INT. |
| 6 | GP1/AN1/VREF | bidirectional | Bi-directional I/O port, serial programming clock, analog input 1 or voltage reference, with optional software-programmed weak pull-up and interrupt-on-pin change; Schmitt Trigger input in serial programming mode. |
| 7 | GP0/AN0 | bidirectional | Bi-directional I/O port, serial programming data or analog input 0, with optional software-programmed weak pull-up and interrupt-on-pin change; Schmitt Trigger input in serial programming mode. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 89 | |||
| Storage temperature | -65 | 150 | °C | 89 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | 89 | ||||
| Voltage on VDD with respect to VSS | VDD | 0 | 7 | V | 89 | ||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | 89 | |||
| Maximum current into VDD pin | 150 | mA | 89 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 89 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 89 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 89 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 89 | ||||
| Supply Voltage | VDD | 3 | 5.5 | V | 92 | ||
| Operating temperature range | TA | -40 | 85 | °C | industrial | 92 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in SLEEP mode | 92 | ||
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 92 | ||
| Supply Current | IDD | 1.2 | 2.5 | mA | FOSC = 4MHz, VDD = 3.0V, XT and EXTRC mode (Note 4) | 92 | |
| Supply Current | IDD | 19 | 37 | µA | FOSC = 32kHz, VDD = 3.0V, WDT disabled, LP mode, Industrial Temperature | 92 | |
| Power-down Current | IPD | 0.25 | 0.8 | µA | VDD = 3.0V, Industrial, WDT disabled | 92 | |
| Power-down Current | IPD | 7 | 9 | µA | VDD = 5.5V, Industrial, WDT disabled | 92 | |
| Watchdog Timer Current | IWDT | 2.2 | 6 | µA | VDD = 3.0V, Industrial | 92 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | For 4.5V ≤ VDD ≤ 5.5V | 95 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 95 | ||
| Input leakage current, I/O ports | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 95 | ||
| Input leakage current, GP3/MCLR | 30 | µA | VSS ≤ VPIN ≤ VDD | 95 | |||
| Input leakage current, GP3 | 5 | µA | Note 6: GP3 input with pull-up disabled; VSS ≤ VPIN ≤ VDD | 95 | |||
| Input leakage current, GP2/T0CKI | 5 | µA | VSS ≤ VPIN ≤ VDD | 95 | |||
| Input leakage current, OSC1 | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS, and LP osc configuration | 95 | |||
| GPIO weak pull-up current | IPUR | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 95 |
| MCLR pull-up current | 30 | µA | VDD = 5V, VPIN = VSS | 95 | |||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 95 | ||
| Output Low Voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 95 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT and LP modes when external clock is used to drive OSC1 | 96 | ||
| Capacitive loading, all I/O pins | CIO | 50 | pF | 96 | |||
| Oscillator Frequency (XT) | FOSC | 0.455 | 4 | MHz | XT osc mode | 100 | |
| Oscillator Frequency (EXTRC) | FOSC | 4 | MHz | EXTRC osc mode | 100 | ||
| Internal Calibrated RC Frequency | 3.65 | 4 | 4.28 | MHz | VDD = 5.0V | 101 | |
| OSC1 to CLKOUT | TosH2ckL | 75 | 200 | ns | EXTRC and INTRC modes (Note 1) | 102 | |
| CLKOUT rise time | TckR | 35 | 100 | ns | EXTRC and INTRC modes (Note 1) | 102 | |
| CLKOUT fall time | TckF | 35 | 100 | ns | EXTRC and INTRC modes (Note 1) | 102 | |
| OSC1 (Q1 cycle) to Port out valid | TosH2ioV | 50 | 150 | ns | 102 | ||
| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) | TosH2ioI | 100 | ns | PIC12C67X | 102 | ||
| Port output rise time | TioR | 10 | 40 | ns | PIC12C67X | 102 | |
| Port output fall time | TioF | 10 | 40 | ns | PIC12C67X | 102 | |
| A/D absolute error (total) | EABS | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 105 | ||
| A/D integral linearity error | EIL | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 105 | ||
| A/D differential linearity error | EDL | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 105 | ||
| A/D full scale error | EFS | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 105 | ||
| A/D offset error | EOFF | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 105 | ||
| Reference voltage | VREF | 2.5 | V | 105 | |||
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | 105 | |||
| A/D clock period | TAD | 1.6 | µs | TOSC based, VREF ≥ 3.0V | 106 | ||
| A/D clock period | TAD | 2 | 4 | 6 | µs | A/D RC Mode | 106 |
| Conversion time (not including S/H time) | TCNV | 11 | 11 | TAD | 106 | ||
| Acquisition time | TACQ | 5 | µs | Amplifier setting time; input changed by not more than 1 LSb from last sampled voltage | 106 | ||
| Acquisition time | TACQ | 20 | µs | 106 |
CAD (KiCad official)
- Symbol:
PIC12C671-04I - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
pic12c671-04i-etched.step/pic12c671-04i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12c671-04i.step/pic12c671-04i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (130 pp, sha256
e9cddfd1ac7c837d, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).