3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownILD8150
Infineon Technologies · LED Drivers · SOIC-8-150mil
ILD8150 from Infineon Technologies, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Internal high-side switch output, rated -0.7 V to 90 V. |
| 2 | BOOT | passive | Internal switch driver bootstrap, connect to bootstrap capacitor; voltage difference between BOOT and SW must never exceed 9 V. |
| 3 | DIM | input | Input for PWM dimming 250 Hz to 20 kHz, internally pulled-up, absolute maximum -0.3 V to 3.6 V. |
| 4 | GND | power_in | Ground. |
| 5 | CS | input | Current sense feedback from the sense resistor RCS, absolute maximum -0.3 V to 1.5 V. |
| 6 | SD | input | Active-low shutdown input (internally pulled-up); 3.3 V must be provided externally at DIM pin to use shutdown, absolute maximum -0.3 V to 3.6 V. |
| 7 | VCC | power_out | Output of the internal regulator (max 7.3 V), connect to bypass capacitor. |
| 8 | VIN | power_in | Input voltage, operating range 8 V to 80 V, absolute maximum 90 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8-150mil |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Junction temperature | TJ | 165 | °C | 12 | |||
| Storage temperature | TS | -65 | 150 | °C | 12 | ||
| Soldering temperature | TSOLD | 260 | °C | 12 | |||
| Latch-up | ILU | 100 | mA | JEDEC JESD78D, TA=85°C | 13 | ||
| ESD HBM | VHBM | 2000 | V | JEDEC JS-001 | 13 | ||
| ESD CDM | VCDM | 500 | V | JEDEC JS-002 | 13 | ||
| Voltage at pin SW | VSW | -0.7 | 90 | V | 13 | ||
| Voltage at pin BOOT | VBOOT | 90 | V | Min is VSW; BOOT-SW must never exceed 9 V | 13 | ||
| Voltage at pin DIM | VDIM | -0.3 | 3.6 | V | 13 | ||
| Voltage at pin CS | VCS | -0.3 | 1.5 | V | 13 | ||
| Voltage at pin SD | VSD | -0.3 | 3.6 | V | 13 | ||
| Voltage at pin VCC | VVCC | -0.3 | 9 | V | Voltage internally supplied to VCC pin | 13 | |
| Voltage at pin VIN | VVIN | -0.3 | 90 | V | 13 | ||
| Junction temperature (operating) | TJ | -40 | 150 | °C | 13 | ||
| VIN pin voltage | VVIN | 8 | 80 | V | 13 | ||
| Thermal resistance junction-to-ambient, PG-DSO-8 | RthJA | 170 | K/W | JEDEC 1s0p no cooling area, for 345 mW power dissipation, TA = 90 °C | 12 | ||
| Thermal resistance junction-to-ambient, PG-DSO-8 | RthJA | 135 | K/W | JEDEC 1s0p 100 mm² cooling area, for 440 mW power dissipation, TA = 90 °C | 12 | ||
| Thermal resistance junction-to-case top, PG-DSO-8 | RthJCtop | 42 | K/W | for 440 mW power dissipation, TA = 90 °C | 12 | ||
| VIN pin to SW pin ON resistance | RON | 290 | mΩ | ISW=200 mA | 14 | ||
| VIN pin to SW pin ON resistance | RON | 545 | mΩ | ISW=200 mA and TJ=150 °C | 14 | ||
| Voltage internally supplied to VCC pin | VVCC | 7.3 | V | 14 | |||
| VIN pin operating current in dim-to-off | IVIN_DO | 2.3 | mA | VDIM=0 V | 14 | ||
| VIN pin operating current in shutdown | IVIN_SD | 100 | μA | VSD=0 V and VDIM=3.3 V provided externally; tested at VVIN=8 V | 14 | ||
| VIN pin operating current in shutdown | IVIN_SD | 140 | μA | VSD=0 V and VDIM=3.3 V provided externally; tested at VVIN=80 V | 14 | ||
| SD pin input high voltage | VSD,IH | 2.1 | V | 14 | |||
| SD pin input low voltage | VSD,IL | 1 | V | 14 | |||
| SD input low current (internal pull-up) | -ISD,LPU | 3 | µA | VSD=0 V | 14 | ||
| CS reference voltage high | VCSH | 379 | 390 | 401 | mV | undimmed | 15 |
| CS reference voltage low | VCSL | 320 | 330 | 340 | mV | undimmed | 15 |
| CS reference voltage hysteresis | HYSTCS | 7 | % | peak-to-average | 15 | ||
| DIM pin input high voltage | VDIM,IH | 2.1 | V | 15 | |||
| DIM pin input low voltage | VDIM,IL | 1 | V | 15 | |||
| DIM input low current (internal pull-up) | -IDIM,LPU | 65 | µA | VDIM=0 V | 15 | ||
| Switching frequency | fSW | 2 | MHz | 15 | |||
| SD pin stable high | tSD_HI | 20 | ms | time to begin of SW turn-on (low power mode exit) | 15 | ||
| SD pin stable low | tSD_LO | 5 | µs | time to begin of SW turn-off (low power mode entry) | 15 | ||
| Delay from VCS crossing to begin of SW turn-off or turn-on | tCSSW | 120 | ns | 15 | |||
| Output current hybrid dimming frequency | fOUT | 3060 | 3400 | 3740 | Hz | 15 | |
| Input PWM frequency | fINPUT | 250 | 20000 | Hz | 15 | ||
| Input PWM recognizable duty cycle | DPWM_IN | 0 | 100 | % | 15 | ||
| Thermal shutdown threshold (turn-off) | TOT,OFF | 153 | 161 | °C | 16 | ||
| Thermal shutdown threshold (turn-on) | TOT,ON | 138 | 146 | °C | 16 | ||
| Thermal shutdown hysteresis | TOT,HYST | 15 | °C | 16 | |||
| Soft-start time undimmed | tSS,100% | 50 | ms | 16 | |||
| Gate-driver under-voltage lock-out (turn-off) | VGD_UVLO,OFF | 3.6 | V | VGD=VBOOT-VSW | 14 | ||
| Gate-driver under-voltage lock-out (turn-on) | VGD_UVLO,ON | 3.7 | V | VGD=VBOOT-VSW | 14 | ||
| VIN under-voltage lock-out (turn-off) | VVIN_UVLO,OFF | 7.1 | V | 14 | |||
| VIN under-voltage lock-out (turn-on) | VVIN_UVLO,ON | 7.5 | V | 14 | |||
| Input PWM duty cycle dim-to-off (turn-off) | DPWM_IN,OFF | 0.45 | % | 16 | |||
| Input PWM duty cycle dim-to-off (turn-on) | DPWM_IN,ON | 0.5 | % | 16 |
CAD (KiCad official)
- Symbol:
ILD8150 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files:
ild8150-etched.step/ild8150-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ild8150.step/ild8150.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (20 pp, sha256
204f2042b499ef8c, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).