Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8410IDC#TRMPBF

Analog Devices · DC-DC Converters · DFN-8-EP(2x2)

LT8410IDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown pin with a built-in comparator: drive below 0.3V to disable the chip and above 1.45V to activate it, and do not float this pin (absolute maximum -0.3V to 16V).
2 VCC power_in Input supply pin that must be locally bypassed to GND; the part operates from 2.5V to 16V with an absolute maximum of -0.3V to 16V.
3 GND power_in Ground pin that must be tied directly to the local ground plane.
4 SW output Collector of the internal NPN power switch; minimize the metal trace area connected to this pin to reduce EMI, with an absolute maximum of -0.3V to 42V.
5 VOUT power_out Drain of the output disconnect PMOS; place a bypass capacitor from this pin to GND, with an absolute maximum of -0.3V to 40V and output voltage not to exceed 40V.
6 CAP power_out Cathode of the internal Schottky diode; place a bypass capacitor from this pin to GND, with an absolute maximum of -0.3V to 40V.
7 VREF power_in Reference pin at 1.235V; an optional capacitor to GND sets soft-start, being discharged for 70µs at start-up and then charged by a 10µA source, with an absolute maximum of -0.3V to 2.5V.
8 FBP input Positive feedback pin and error amplifier positive input, where VFBP = VOUT / 31.85; absolute maximum is -0.3V to 2.5V.
9 GND power_in Exposed pad is GND and must be soldered to the PCB and grounded for proper shielding.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Operating Voltage 16 V 2
Minimum Operating Voltage 2.2 2.5 V 2
Operating Temperature Range -40 125 °C Operating temperature range (Note 2); I grade 2
VCC Voltage -0.3 16 V 2
SW Voltage -0.3 42 V 2
CAP Voltage -0.3 40 V 2
VOUT Voltage -0.3 40 V 2
SHDN Voltage -0.3 16 V 2
VREF Voltage -0.3 2.5 V 2
FBP Voltage -0.3 2.5 V 2
Maximum Junction Temperature 125 °C 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 88 °C/W DC8 (2mm × 2mm) DFN package 2
Reference Voltage 1.22 1.235 1.255 V l: full operating temperature range; VCC = 3V, VSHDN = VCC 2
VREF Current Limit 10 µA (Note 3) 2
Quiescent Current Not Switching 8.5 12 µA l: full operating temperature range 2
Quiescent Current in Shutdown 0 1 µA VSHDN = 0V; l: full operating temperature range 2
Quiescent Current from VOUT and CAP 3 µA VOUT = 16V 2
Minimum Switch Off Time After Start-Up 240 nS (Note 4) 2
Minimum Switch Off Time During Start-Up 600 nS (Note 4) 2
Switch Current Limit LT8410 20 25 30 mA l: full operating temperature range 2
Switch VCESAT LT8410 150 mV ISW = 10mA 3
Switch Leakage Current 0 1 µA VSW = 5V 3
Schottky Forward Voltage 650 850 mV IDIODE = 10mA 3
Schottky Reverse Leakage 0 0.5 µA VCAP, VSW = 5V 3
Schottky Reverse Leakage 0 1 µA VCAP, VSW = 40V 3
PMOS Disconnect Current Limit LT8410 14 19 25 mA l: full operating temperature range 3
PMOS Disconnect 50 mV VCAP, VOUT; IOUT = 1mA 3
VOUT Resistor Divider Ratio 31.6 31.85 32.2 l: full operating temperature range 3
FBP Pin Bias Current 1.3 30 nA VFBP = 0.5V, current flows out of pin; l: full operating temperature range 3
SHDN Minimum Input Voltage High 1.2 1.3 1.45 V SHDN rising; l: full operating temperature range 3
SHDN Input Voltage High Hysteresis 60 mV 3
SHDN Hysteresis Current 0.08 0.1 0.14 µA (Note 3) 3
SHDN Input Voltage Low 0.3 V 3
SHDN Pin Bias Current 0 1 µA VSHDN = 3V 3
SHDN Pin Bias Current 2 3 µA VSHDN = 16V 3

CAD (KiCad official)

  • Symbol: LT8410IDC#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt8410idc-trmpbf-etched.step / lt8410idc-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8410idc-trmpbf.step / lt8410idc-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 49728aa30a801127, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF