component
AB24S
Public Made by Adomby adom
MDD(Microdiode Electronics) Bridge Rectifiers, ABS. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAB24S
MDD(Microdiode Electronics) · Bridge Rectifiers · ABS
AB24S from MDD(Microdiode Electronics), in a ABS. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | power_out | Positive DC output terminal of the bridge rectifier, identified by the polarity symbol marked on the body. |
| 2 | - | power_out | Negative DC output terminal of the bridge rectifier, identified by the polarity symbol marked on the body. |
| 3 | 3 | passive | AC input terminal of the bridge rectifier; the datasheet gives a maximum repetitive peak reverse voltage of 40 to 200 V for the AB24S to AB220S series. |
| 4 | 4 | passive | AC input terminal of the bridge rectifier; the datasheet gives a maximum repetitive peak reverse voltage of 40 to 200 V for the AB24S to AB220S series. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MDD(Microdiode Electronics) |
| Package | ABS |
| Category | Diodes |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VRRM | 40 | V | 1 | |||
| Maximum RMS voltage | VRMS | 28 | V | 1 | |||
| Maximum DC blocking voltage | VDC | 40 | V | 1 | |||
| Maximum average forward rectified current | IF(AV) | 2 | A | 1 | |||
| Peak forward surge current | IFSM | 50 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Maximum instantaneous forward voltage drop | VF | 0.55 | V | per leg at 2A | 1 | ||
| Maximum DC reverse current | IR | 0.5 | mA | TA=25°C at rated DC blocking voltage | 1 | ||
| Maximum DC reverse current | IR | 10 | mA | TA=100°C at rated DC blocking voltage | 1 | ||
| Operating temperature range | TJ | -55 | 125 | °C | 1 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 1 | ||
| Typical thermal resistance, junction to ambient | RθJA | 70 | °C/W | Mounted on glass epoxy PCB with 4 X (5X5mm) copper pad (note 2) | 1 | ||
| Typical junction capacitance | Cj | 220 | pF | Measured at 1MHz and applied reverse voltage of 4 V DC (note 1) | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ABS | Case : JEDEC ABS Molded plastic body | 1 |
CAD (KiCad official)
- Symbol:
AB24S - Footprint:
Diode_SMD:Diode_Bridge_Diotec_ABS - 3D model: ABS (KiCad packages3D, STEP)
- 3D model files:
ab24s-etched.step/ab24s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ab24s.step/ab24s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MDD(Microdiode Electronics) datasheet (3 pp, sha256
163735390dd1f7e1, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).