Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6005CGN#PBF

Analog Devices · Precision OpAmps · SSOP-16-150mil

LT6005CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings within 100mV of the positive rail and 50mV of the negative rail with no load over the industrial range and can typically source 8mA on a single 5V supply.
2 -IN A input Inverting input of amplifier A, whose input common-mode range is guaranteed by CMRR from V- to V+.
3 +IN A input Non-inverting input of amplifier A, whose input common-mode range is guaranteed by CMRR from V- to V+ and which tolerates inputs driven up to 9V below V- without phase reversal.
4 V+ power_in Positive supply pin, operating from 1.6V to 16V with an absolute maximum total supply of 18V (V+ to V-), and should be bypassed with about 0.01µF within an inch of the pin.
5 +IN B input Non-inverting input of amplifier B, whose input common-mode range is guaranteed by CMRR from V- to V+ and which tolerates inputs driven up to 9V below V- without phase reversal.
6 -IN B input Inverting input of amplifier B, whose input common-mode range is guaranteed by CMRR from V- to V+.
7 OUT B output Output of amplifier B, which swings within 100mV of the positive rail and 50mV of the negative rail with no load over the industrial range and can typically source 8mA on a single 5V supply.
8 NC unconnected No internal connection.
9 NC unconnected No internal connection.
10 OUT C output Output of amplifier C, which swings within 100mV of the positive rail and 50mV of the negative rail with no load over the industrial range and can typically source 8mA on a single 5V supply.
11 -IN C input Inverting input of amplifier C, whose input common-mode range is guaranteed by CMRR from V- to V+.
12 +IN C input Non-inverting input of amplifier C, whose input common-mode range is guaranteed by CMRR from V- to V+ and which tolerates inputs driven up to 9V below V- without phase reversal.
13 V- power_in Negative supply pin (V-); when using split supplies it is bypassed the same way as the positive supply, and the substrate diode from output to V- conducts unlimited current if the output is forced below V-.
14 +IN D input Non-inverting input of amplifier D, whose input common-mode range is guaranteed by CMRR from V- to V+ and which tolerates inputs driven up to 9V below V- without phase reversal.
15 -IN D input Inverting input of amplifier D, whose input common-mode range is guaranteed by CMRR from V- to V+.
16 OUT D output Output of amplifier D, which swings within 100mV of the positive rail and 50mV of the negative rail with no load over the industrial range and can typically source 8mA on a single 5V supply.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (GN, 25°C) VOS 190 650 µV TA = 25°C, VS = 1.8V / 5V 3
Input Offset Voltage (GN, 0 to 70°C) VOS 925 µV 0°C ≤ TA ≤ 70°C 3
Input Offset Voltage (GN, -40 to 85°C) VOS 1.15 mV -40°C ≤ TA ≤ 85°C 3
Input Offset Voltage Drift (GN) ΔVOS/ΔT 2 5 µV/°C GN package; Note 5 (not 100% tested) 4
Supply Current per Amplifier (1.8V, 25°C) IS 0.85 1 µA VS = 1.8V, TA = 25°C 4
Supply Current per Amplifier (1.8V, 0 to 70°C) IS 1.4 µA VS = 1.8V, 0°C ≤ TA ≤ 70°C 4
Supply Current per Amplifier (1.8V, -40 to 85°C) IS 1.6 µA VS = 1.8V, -40°C ≤ TA ≤ 85°C 4
Supply Current per Amplifier (5V, 25°C) IS 1 1.2 µA VS = 5V, TA = 25°C 4
Supply Current per Amplifier (5V, 0 to 70°C) IS 1.6 µA VS = 5V, 0°C ≤ TA ≤ 70°C 4
Supply Current per Amplifier (5V, -40 to 85°C) IS 1.9 µA VS = 5V, -40°C ≤ TA ≤ 85°C 4
Common Mode Rejection Ratio (1.8V) CMRR 73 100 dB VS = 1.8V, VCM = 0V to 0.7V 4
Common Mode Rejection Ratio (1.8V, GN) CMRR 63 80 dB VS = 1.8V, VCM = 0V to 1.8V, GN 4
Common Mode Rejection Ratio (5V) CMRR 88 115 dB VS = 5V, VCM = 0V to 3.9V 4
Common Mode Rejection Ratio (5V, GN) CMRR 72 90 dB VS = 5V, VCM = 0V to 5V, GN 4
Input Offset Voltage Shift (VCM to V+ -1.1V) 7 155 µV VCM = 0V to V+, 1.1V 4
Input Offset Voltage Shift (GN, to V+) 0.16 1.3 mV VCM = 0V to V+, S5, MS8, GN 4
Power Supply Rejection Ratio (0 to 70°C) PSRR 80 95 dB VS = 1.6V to 6V, VCM = 0.5V, 0°C ≤ TA ≤ 70°C 4
Power Supply Rejection Ratio (-40 to 85°C) PSRR 78 95 dB VS = 1.7V to 6V, VCM = 0.5V, -40°C ≤ TA ≤ 85°C 4
Minimum Supply Voltage (0 to 70°C) 1.6 V Guaranteed by PSRR, 0°C ≤ TA ≤ 70°C 4
Minimum Supply Voltage (-40 to 85°C) 1.7 V Guaranteed by PSRR, -40°C ≤ TA ≤ 85°C 4
Large Signal Voltage Gain (1.8V, 0 to 70°C) AVOL 25 V/mV VS = 1.8V, RL = 20kΩ, VOUT = 0.25V to 1.25V 4
Large Signal Voltage Gain (1.8V, -40 to 85°C) AVOL 15 V/mV VS = 1.8V, RL = 20kΩ, VOUT = 0.25V to 1.25V 4
Large Signal Voltage Gain (5V, 0 to 70°C) AVOL 100 V/mV VS = 5V, RL = 20kΩ, VOUT = 0.25V to 4.25V 4
Large Signal Voltage Gain (5V, -40 to 85°C) AVOL 60 V/mV VS = 5V, RL = 20kΩ, VOUT = 0.25V to 4.25V 4
Output Swing Low (no load) VOL 15 50 mV No Load 4
Output Swing Low (ISINK 100µA) VOL 110 240 mV ISINK = 100µA 4
Output Swing High (no load) VOH 45 100 mV No Load 4
Output Swing High (ISOURCE 100µA) VOH 200 350 mV ISOURCE = 100µA 4
Input Voltage Range 0 V Guaranteed by CMRR; upper limit printed as V+ 4
Slew Rate (5V, 0 to 70°C) SR 0.55 V/ms AV = -1, RF = RG = 1MΩ, 0°C ≤ TA ≤ 70°C 5
Slew Rate (5V, -40 to 85°C) SR 0.4 V/ms AV = -1, RF = RG = 1MΩ, -40°C ≤ TA ≤ 85°C 5
Input Offset Voltage (GN, ±8V, 25°C) VOS 200 750 µV VS = ±8V, TA = 25°C 6
Input Offset Voltage (GN, ±8V, 0 to 70°C) VOS 1.05 mV VS = ±8V, 0°C ≤ TA ≤ 70°C 6
Input Offset Voltage (GN, ±8V, -40 to 85°C) VOS 1.25 mV VS = ±8V, -40°C ≤ TA ≤ 85°C 6
Input Offset Voltage Drift (GN, ±8V) ΔVOS/ΔT 2 5 µV/°C VS = ±8V, GN package; Note 5 6
Input Bias Current (±8V, 0 to 70°C) IB 7 100 pA VS = ±8V, 0°C ≤ TA ≤ 70°C 6
Input Bias Current (±8V, -40 to 85°C) IB 7 150 pA VS = ±8V, -40°C ≤ TA ≤ 85°C 6
Input Offset Current (±8V) IOS 7 90 pA VS = ±8V 6
Common Mode Rejection Ratio (±8V) CMRR 92 120 dB VS = ±8V, VCM = -8V to 6.9V 6
Common Mode Rejection Ratio (±8V, GN) CMRR 82 100 dB VS = ±8V, VCM = -8V to 8V, GN 6
Input Offset Voltage Shift (±8V) 15 375 µV VS = ±8V, VCM = -8V to 6.9V 6
Input Offset Voltage Shift (±8V, GN) 0.16 1.3 mV VS = ±8V, VCM = -8V to 8V, GN 6
Power Supply Rejection Ratio (±8V) PSRR 86 105 dB VS = ±1.1V to ±8V 6
Output Swing Low (±8V, no load) VOL 10 50 mV VS = ±8V, No Load 6
Output Swing Low (±8V, ISINK 100µA) VOL 105 240 mV VS = ±8V, ISINK = 100µA 6
Output Swing High (±8V, no load) VOH 50 120 mV VS = ±8V, No Load 6
Output Swing High (±8V, ISOURCE 100µA) VOH 195 350 mV VS = ±8V, ISOURCE = 100µA 6
Slew Rate (±8V, 0 to 70°C) SR 0.55 V/ms VS = ±8V, AV = -1, RF = RG = 1MΩ, 0°C ≤ TA ≤ 70°C 6
Slew Rate (±8V, -40 to 85°C) SR 0.4 V/ms VS = ±8V, AV = -1, RF = RG = 1MΩ, -40°C ≤ TA ≤ 85°C 6
Input Voltage Below V- 9 V Input voltage below V- 2
Input Current 10 mA 2
Operating Temperature Range (LT6005C) -40 85 °C LT6005C, Note 3 2
Junction Temperature (SSOP, all other packages) TJ 150 °C All other packages (SSOP) 2
Storage Temperature Range (SSOP) -65 150 °C All other packages (SSOP) 2
Lead Temperature (Soldering, 10 sec) 300 °C SSOP package, 10 sec 2
Specified Temperature Range (LT6005C) 0 70 °C LT6005C, Note 4 2
Thermal Resistance Junction-to-Ambient (SSOP) θJA 135 °C/W GN16 SSOP package 2

CAD (KiCad official)

  • Symbol: LT6005CGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: lt6005cgn-etched.step / lt6005cgn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6005cgn.step / lt6005cgn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 5d4ee09bd361ef6a, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF