Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ICW6208

ICW · DC-DC Converters · ESOP-8

ICW6208 from ICW, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Chip supply input; absolute maximum rating for VIN is -0.3 V to 100 V and the operating input range is 10 V to 100 V.
2 GND power_in Ground reference for the IC; high-current paths (GND, VIN, VS, IS) should be kept wide and short per the layout guidance.
3 EN input Enable pin, active high, that starts switching operation; absolute maximum rating is -0.3 V to 7 V and the datasheet gives an enable-high threshold of 2.8 V minimum and enable-low of 1 V maximum.
4 VIA output Output of the input supply divided through a resistor divider; absolute maximum rating is -0.3 V to 7 V.
5 FB input Output voltage feedback input to the internal error amplifier, which has a 1.25 V reference; absolute maximum rating is -0.3 V to 7 V and FB input current is at most 1 uA.
6 VB power_out Floating bootstrap supply for the high-side driver; absolute maximum rating is VS-0.3 V to VS+7 V.
7 VS power_in Floating ground for the high-side driver; absolute maximum rating is -0.3 V to 100 V.
8 IS input MOS peak-current protection input; absolute maximum rating is VS-0.3 V to VS+6 V and the current-limit sense voltage is typically 0.18 V.
9 VIN power_in Chip power input on the package back side, labeled VIN in the pin table; absolute maximum rating for VIN is -0.3 V to 100 V.

Key specifications

Parameter Value
Manufacturer ICW
Package ESOP-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN supply voltage (absolute maximum) VIN -0.3 100 V 5
EN enable pin voltage (absolute maximum) EN -0.3 7 V 5
VIA divided-input output voltage (absolute maximum) VIA -0.3 7 V 5
FB voltage feedback input (absolute maximum) FB -0.3 7 V 5
VB floating supply voltage (absolute maximum) VB -0.3 7 V relative to VS; printed as VS-0.3 to VS+7V 5
VS floating ground voltage (absolute maximum) VS -0.3 100 V 5
IS MOS peak current sense input (absolute maximum) IS -0.3 6 V relative to VS; printed as VS-0.3 to VS+6V 5
Ambient operating temperature (absolute maximum) TA -45 125 ℃ 5
Storage temperature (absolute maximum) Tstr -55 150 ℃ 5
Soldering temperature (absolute maximum) TL 300 ℃ T=10S 5
Input supply voltage VIN VIN 10 100 V 5
Quiescent supply current ICC 2 5 mA EN>2.8V 5
Standby current Isd 10 uA EN<1V 5
Enable pin high-level voltage EN_on 2.8 7 V 5
Enable pin low-level voltage EN_off 0 1 V 5
Voltage feedback input (FB reference) FB 1.21 1.25 1.29 V EN>2.8V 5
Voltage feedback input current Ifb 1 uA EN>2.8V 5

CAD (KiCad official)

  • Symbol: ICW6208
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: icw6208-etched.step / icw6208-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icw6208.step / icw6208.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ICW datasheet (7 pp, sha256 c58818a99fdd00f6, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF