3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownR7FA2A1AB3CFJ#AA0
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
R7FA2A1AB3CFJ#AA0 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P400 | bidirectional | General-purpose input/output pin P400 (listed as I/O in Table 1.15), also carrying alternate functions such as CMPIN0 and TS00. |
| 2 | VCL | passive | Connect this pin to VSS through a smoothing capacitor that stabilizes the internal power supply, placed close to the pin. |
| 3 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 4 | P213/XTAL | output | Output pin for the main clock crystal resonator (XTAL); the pin is also general-purpose I/O P213. |
| 5 | P212/EXTAL | input | Input pin for the main clock crystal resonator; an external clock signal can be input through this pin. The pin is also general-purpose I/O P212. |
| 6 | VCC | power_in | Power supply pin for the MCU, operating over 1.6 to 5.5 V; connect it to VSS by a 0.1-μF capacitor placed close to the pin. |
| 7 | P408 | bidirectional | General-purpose input/output pin P408 (listed as I/O in Table 1.15), also carrying timer and communication alternate functions. |
| 8 | P407 | bidirectional | General-purpose input/output pin P407 (listed as I/O in Table 1.15), also carrying the CAC reference clock input CACREF_B as an alternate function. |
| 9 | P206 | bidirectional | General-purpose input/output pin P206 (listed as I/O in Table 1.15), also carrying timer and communication alternate functions. |
| 10 | P205 | bidirectional | General-purpose input/output pin P205 (listed as I/O in Table 1.15), also carrying timer and communication alternate functions. |
| 11 | P204 | bidirectional | General-purpose input/output pin P204 (listed as I/O in Table 1.15), also carrying communication alternate functions. |
| 12 | RES | input | Reset signal input pin; the MCU enters the reset state when this signal goes low. |
| 13 | P201/MD | bidirectional | MD pin sets the operating mode and its signal level must not be changed during operating mode transition on release from the reset state; the pin is also general-purpose I/O P201. |
| 14 | P200 | input | General-purpose input-only pin P200 (listed as Input in Table 1.15), which also serves as the NMI non-maskable interrupt request input. |
| 15 | P301 | bidirectional | General-purpose input/output pin P301 (listed as I/O in Table 1.15), also carrying timer, communication and key interrupt alternate functions. |
| 16 | P300/SWCLK | bidirectional | Serial wire clock input (SWCLK) for on-chip debug, which shares the pin with general-purpose I/O P300. |
| 17 | P108/SWDIO | bidirectional | Serial wire debug data input/output pin (SWDIO) for on-chip debug, which shares the pin with general-purpose I/O P108. |
| 18 | P110 | bidirectional | General-purpose input/output pin P110 (listed as I/O in Table 1.15), also carrying the CLKOUT_A clock output alternate function. |
| 19 | ADREG | output | Regulator capacitance pin for the SDADC24; per the electrical characteristics, connect it to AVSS1 by a 0.47 μF (-50% to +20%) capacitor. |
| 20 | SBIAS/VREFI | output | Sensor bias output (SBIAS) that is a Pch open-drain output requiring at least 1 mA load current, shared with the external reference voltage input VREFI for the SDADC24; connect it to AVSS1 by a 0.22 μF (-20% to +20%) capacitor when used as SBIAS. |
| 21 | AVCC1 | power_in | Analog voltage supply pin for the SDADC24, specified at 2.7 to 5.5 V for the SDADC24 characteristics. |
| 22 | AVSS1 | power_in | Analog ground pin for the SDADC24. |
| 23 | P101 | bidirectional | General-purpose input/output pin P101 (listed as I/O in Table 1.15); the input voltage is limited to -0.3 V to AVCC1 + 0.3 V per the absolute maximum ratings. |
| 24 | P100 | bidirectional | General-purpose input/output pin P100 (listed as I/O in Table 1.15); the input voltage is limited to -0.3 V to AVCC1 + 0.3 V per the absolute maximum ratings. |
| 25 | P500 | bidirectional | General-purpose input/output pin P500 (listed as I/O in Table 1.15), also carrying the DA12_0 and analog input alternate functions. |
| 26 | P501 | bidirectional | General-purpose input/output pin P501 (listed as I/O in Table 1.15), also carrying the analog input and IVREF0 alternate functions. |
| 27 | P502 | bidirectional | General-purpose input/output pin P502 (listed as I/O in Table 1.15), also carrying the analog input and communication alternate functions. |
| 28 | AVCC0 | power_in | Analog voltage supply pin for the ADC16, DAC12, DAC8, ACMPHS, ACMPLP and OPAMP. |
| 29 | AVSS0 | power_in | Analog ground pin for the ADC16, DAC12, DAC8, ACMPHS, ACMPLP and OPAMP. |
| 30 | VREFL0 | power_in | Analog reference ground pin for the ADC16; connect it to AVSS0 when the ADC16 is not used. |
| 31 | VREFH0 | power_in | Analog reference voltage supply pin for the ADC16; connect it to AVCC0 when the ADC16 is not used, with the reference range given as 1.5 to AVCC0 for the ADC16. |
| 32 | P109 | bidirectional | General-purpose input/output pin P109 (listed as I/O in Table 1.15), also carrying timer, communication and ADC trigger alternate functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | 6.5 | V | 19 | ||
| Input voltage, 5 V-tolerant ports | Vin | -0.3 | 6.5 | V | 5 V-tolerant ports | 19 | |
| Analog power supply voltage | AVCC0, AVCC1 | -0.5 | 6.5 | V | 19 | ||
| Reference power supply voltage | VREFH0 | -0.3 | 6.5 | V | 19 | ||
| USB power supply voltage | VCC_USB | -0.5 | 6.5 | V | 20 | ||
| USB power supply voltage (LDO input) | VCC_USB_LDO | -0.5 | 6.5 | V | 20 | ||
| Operating temperature | Topr | -40 | 105 | °C | Products with Ta -40 to +105°C | 20 | |
| Storage temperature | Tstg | -55 | 125 | °C | 20 | ||
| Power supply voltage | VCC | 1.6 | 5.5 | V | When USBFS is not used | 20 | |
| USB power supply voltage (USB regulator disable, input) | VCC_USB | 3 | 3.3 | 3.6 | V | When USBFS is used, USB regulator disable | 21 |
| USB power supply voltage (USB regulator enable) | VCC_USB_LDO | 3.8 | 5.5 | V | When USBFS is used, USB regulator enable | 21 | |
| Analog power supply voltage | AVCC0 | 1.6 | 5.5 | V | 21 | ||
| Reference voltage for ADC16 | VREFH0 | 1.7 | V | When used as ADC16 reference; printed maximum is AVCC0 | 21 | ||
| Reference voltage for SDADC24 | VREFI | 0.8 | 2.4 | V | When used as SDADC24 reference | 21 | |
| Permissible junction temperature | Tj | 125 | °C | Products with Ta -40 to +105°C | 21 | ||
| Input voltage high, IIC (SMBus) | VIH | 2.2 | V | VCC = 3.6 to 5.5 V | 22 | ||
| Input voltage high, IIC (SMBus) | VIH | 2 | V | VCC = 2.7 to 3.6 V | 22 | ||
| Input voltage low, IIC (SMBus) | VIL | 0.8 | V | VCC = 2.7 to 5.5 V | 22 | ||
| Input voltage high, 5 V-tolerant ports | VIH | 5.8 | V | 22 | |||
| Permissible output current (average per pin), middle drive | IOH | -20 | mA | Middle drive, VCC = 3.0 to 5.5 V | 23 | ||
| Permissible output current (average per pin), middle drive | IOL | 20 | mA | Middle drive, VCC = 3.0 to 5.5 V | 23 | ||
| Permissible output current (average per pin), other output pins, low drive | IOH | -4 | mA | Low drive | 23 | ||
| Permissible output current (average per pin), other output pins, low drive | IOL | 4 | mA | Low drive | 23 | ||
| Permissible output current (average per pin), other output pins, middle drive | IOH | -8 | mA | Middle drive | 23 | ||
| Permissible output current (average per pin), other output pins, middle drive | IOL | 8 | mA | Middle drive | 23 | ||
| Permissible total output current, all output pins | ΣIOH (max) | -60 | mA | 23 | |||
| Permissible total output current, all output pins | ΣIOL (max) | 60 | mA | 23 | |||
| Output voltage low, other output pins, low drive | VOL | 0.8 | V | VCC = 4.0 to 5.5 V, IOL = 2.0 mA | 24 | ||
| Output voltage low, other output pins, low drive | VOL | 0.5 | V | VCC = 2.7 to 4.0 V, IOL = 1.0 mA | 25 | ||
| Input leakage current, RES, P200, P214, P215 | /Iin/ | 1 | μA | Vin = 0 V, Vin = VCC | 26 | ||
| Three-state leakage current, 5 V-tolerant ports | /ITSI/ | 1 | μA | Vin = 0 V, Vin = 5.8 V | 26 | ||
| Input pull-up resistor | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 26 |
| Input capacitance, P012 to P015, P200, P502, P914, P915 | Cin | 30 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 26 | ||
| Input capacitance, other input pins | Cin | 15 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 26 | ||
| Supply current, high-speed mode, normal, all peripheral clocks disabled, code executing while(1) from flash | ICC | 5.2 | mA | ICLK = 48 MHz | 35 | ||
| Supply current, high-speed mode, normal, all peripheral clocks enabled, code executing while(1) from flash | ICC | 12.6 | mA | ICLK = 48 MHz | 35 | ||
| Supply current, high-speed mode, normal, all peripheral clocks enabled, code executing from flash | ICC | 28.5 | mA | ICLK = 48 MHz | 35 | ||
| Supply current, high-speed mode, sleep, all peripheral clocks disabled | ICC | 2.7 | mA | ICLK = 48 MHz | 35 | ||
| Supply current, low-speed mode, normal, all peripheral clocks disabled, code executing while(1) from flash | ICC | 0.3 | mA | ICLK = 1 MHz | 36 | ||
| Supply current, subosc-speed mode, normal, all peripheral clocks disabled, code executing while(1) from flash | ICC | 6.5 | μA | ICLK = 32.768 kHz | 36 | ||
| Supply current, software standby mode | ICC | 0.5 | 2 | μA | Ta = 25°C | 41 | |
| Supply current, software standby mode | ICC | 4.4 | 45 | μA | Ta = 105°C | 41 | |
| Analog power supply current, during 16-bit A/D conversion | IAVCC0 | 1.5 | mA | 43 | |||
| Reference power supply current, during 16-bit A/D conversion | IREFH0 | 80 | μA | 43 | |||
| Reference power supply current, during 12-bit D/A conversion | IREFH | 650 | μA | 43 | |||
| High-speed analog comparator (ACMPHS) operating current | ICPMHS | 70 | 100 | μA | AVCC0 ≥ 2.7 V | 43 | |
| System clock (ICLK) operation frequency, high-speed mode | f | 0.032768 | 48 | MHz | VCC = 2.7 to 5.5 V | 45 | |
| System clock (ICLK) operation frequency, high-speed mode | f | 0.032768 | 16 | MHz | VCC = 2.4 to 2.7 V | 45 | |
| System clock (ICLK) operation frequency, middle-speed mode | f | 0.032768 | 12 | MHz | VCC = 2.7 to 5.5 V | 45 | |
| System clock (ICLK) operation frequency, low-voltage mode | f | 0.032768 | 4 | MHz | VCC = 1.6 to 5.5 V | 46 | |
| System clock (ICLK) operation frequency, low-speed mode | f | 0.032768 | 1 | MHz | VCC = 1.8 to 5.5 V | 46 | |
| EXTAL external clock input cycle time | tXcyc | 50 | ns | 47 | |||
| EXTAL external clock input frequency | fEXTAL | 20 | MHz | 2.4 ≤ VCC ≤ 5.5 V | 47 | ||
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 2.4 ≤ VCC ≤ 5.5 V | 47 | |
| LOCO clock oscillation frequency | fLOCO | 27.8528 | 32.768 | 37.6832 | kHz | 47 | |
| MOCO clock oscillation frequency | fMOCO | 6.8 | 8 | 9.2 | MHz | 47 | |
| Reset input pulse width at power-on | tRESWP | 3 | ms | At power-on | 49 | ||
| Sub-clock oscillator oscillation frequency | fSUB | 32.768 | kHz | 47 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminal material (Pb-free) A: Sn (Tin) only | 9 |
CAD (KiCad official)
- Symbol:
R7FA2A1AB3CFJ#AA0 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r7fa2a1ab3cfj-aa0-etched.step/r7fa2a1ab3cfj-aa0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r7fa2a1ab3cfj-aa0.step/r7fa2a1ab3cfj-aa0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (100 pp, sha256
4d222524fc11a876, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).