component
FRM252WJR430TK
Public Made by Adomby adom
FOJAN Current Sense Resistors / Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFRM252WJR430TK
FOJAN · Current Sense Resistors / Shunt Resistors · 2512
FRM252WJR430TK from FOJAN, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FOJAN |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (J code = ±5%) | -5 | 5 | % | J = ±5% per part-numbering table | 2 | ||
| Temperature coefficient of resistance | -50 | 50 | PPM/℃ | Measured at 25°C and +125°C, reference point +25°C | 5 | ||
| Operating temperature range | -55 | 170 | °C | 5 | |||
| Power rating | 2 | W | at P70 | 5 | |||
| Dielectric withstanding voltage | 500 | V DC | 2 | ||||
| Rated current | 63 | A | 5 | ||||
| Max overload current | 141 | A | 5 | ||||
| High temperature exposure (storage) resistance change | △R | -1 | 1 | % | 170°C, 1000 h; measured 24 h after test | 6 | |
| Low temperature exposure (storage) resistance change | △R | -0.5 | 0.5 | % | -55°C, 1000 h; measured 24 h after test | 6 | |
| Temperature cycling resistance change | △R | -0.5 | 0.5 | % | 1000 cycles, -55°C to 125°C; measured 24 h after test | 6 | |
| Short time overload resistance change | △R | -0.5 | 0.5 | % | 5 X rated power for 5 s | 6 | |
| Moisture resistance resistance change | △R | -1 | 1 | % | 24 h per cycle, 10 cycles, zero power | 6 | |
| Biased humidity resistance change | △R | -0.5 | 0.5 | % | 10% rated power, 85°C, RH 85%, 1000 h; measured 24 h after test | 6 | |
| Load life resistance change | △R | -1 | 1 | % | 1000 h at +70°C, 1.5 h ON / 0.5 h OFF; measured 24 h after test | 7 | |
| Resistance to soldering heat resistance change | △R | -0.5 | 0.5 | % | 260±5°C solder, 10±1 s dwell | 7 | |
| Mechanical shock resistance change | △R | -0.5 | 0.5 | % | 100 g's, 6 ms half sine shock pulse | 7 | |
| Vibration resistance change | △R | -0.5 | 0.5 | % | 5 g's for 20 min, 12 cycles, 10-2000 Hz | 7 | |
| Board flex resistance change | △R | -0.5 | 0.5 | % | Min 2 mm deflection, 60 s | 7 | |
| Thermal shock resistance change | △R | -1 | 1 | % | -55°C/+155°C, 1000 cycles | 7 | |
| ESD resistance change | △R | -1 | 1 | % | Direct contact ±6 kV; air discharge +12 kV, +16 kV, +25 kV | 7 |
CAD (KiCad official)
- Symbol:
FRM252WJR430TK - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
frm252wjr430tk-etched.step/frm252wjr430tk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);frm252wjr430tk.step/frm252wjr430tk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FOJAN datasheet (12 pp, sha256
13a1c74e6b23cc10, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).