3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65LVDS32PW
Texas Instruments · LVDS ICs · TSSOP-16
SN65LVDS32PW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Differential (LVDS) inverting input; |
| 2 | 1A | input | Differential (LVDS) non-inverting input; |
| 3 | 1Y | output | LVTTL output signal. |
| 4 | G | input | Enable input (HI = ENABLE); VIH minimum 2 V and VIL maximum 0.8 V. |
| 5 | 2Y | output | LVTTL output signal. |
| 6 | 2A | input | Differential (LVDS) non-inverting input; |
| 7 | 2B | input | Differential (LVDS) inverting input; |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 3B | input | Differential (LVDS) inverting input; |
| 10 | 3A | input | Differential (LVDS) non-inverting input; |
| 11 | 3Y | output | LVTTL output signal. |
| 12 | G/ | input | Enable input (LO = ENABLE); VIH minimum 2 V and VIL maximum 0.8 V. |
| 13 | 4Y | output | LVTTL output signal. |
| 14 | 4A | input | Differential (LVDS) non-inverting input; |
| 15 | 4B | input | Differential (LVDS) inverting input; |
| 16 | VCC | power_in | Supply voltage of 3 V min, 3.3 V nominal, 3.6 V max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4 | V | 7 | ||
| Input voltage range, A or B | VI | -0.5 | 4 | V | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Electrostatic discharge, human body model, bus pins | V(ESD) | -8000 | 8000 | V | HBM per ANSI/ESDA/JEDEC JS-001, bus pins | 7 | |
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 7 | |||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| High-level input voltage | VIH | 2 | V | G, G, 1, 2EN, or 3, 4EN | 7 | ||
| Low-level input voltage | VIL | 0.8 | V | G, G, 1, 2EN, or 3, 4EN | 7 | ||
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 7 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | SN65 prefix | 7 | |
| Positive-going differential input voltage threshold | VIT+ | 100 | mV | See Figure 7 and Table 1 | 9 | ||
| Negative-going differential input voltage threshold | VIT- | -100 | mV | See Figure 7 and Table 1 | 9 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 9 | ||
| High-level output voltage | VOH | 2.8 | V | IOH = -4 mA | 9 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 9 | ||
| Supply current, enabled | ICC | 10 | 18 | mA | Enabled, No load | 9 | |
| Supply current, disabled | ICC | 0.25 | 0.5 | mA | Disabled | 9 | |
| Power-off input current (A or B input) | II(OFF) | 6 | 20 | μA | VCC = 0, VI = 3.6 V | 9 | |
| High-level input current (EN, G, or G input) | IIH | 10 | μA | VIH = 2 V | 9 | ||
| Low-level input current (EN, G, or G input) | IIL | 10 | μA | VIL = 0.8 V | 9 | ||
| High-impedance output current | IOZ | -10 | 10 | μA | VO = 0 or VCC | 9 | |
| Part-to-part skew | tsk(pp) | 1 | ns | 10 | |||
| Propagation delay time, low-to-high-level output | tPLH | 1.5 | 2.1 | 3 | ns | CL = 10 pF | 10 |
| Propagation delay time, high-to-low-level output | tPHL | 1.5 | 2.1 | 3 | ns | CL = 10 pF | 10 |
| Channel-to-channel output skew | tsk(o) | 0.1 | 0.3 | ns | CL = 10 pF, See Figure 8 | 10 | |
| Propagation delay time, high-level-to-high-impedance output | tPHZ | 6.5 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, low-level-to-high-impedance output | tPLZ | 5.5 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, high-impedance-to-high-level output | tPZH | 8 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, high-impedance-to-low-level output | tPZL | 3 | 12 | ns | See Figure 9 | 10 |
CAD (KiCad official)
- Symbol:
SN65LVDS32PW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds32pw-etched.step/sn65lvds32pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds32pw.step/sn65lvds32pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
890e33b3bb5c4e86, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).