Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCM1789TPWRQ1

Texas Instruments · ADC/DAC - Specialized · TSSOP-24

PCM1789TPWRQ1 from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LRCK input LRCK is the audio data word clock input, with a 50-kΩ typical internal pull-down and Schmitt-trigger input that is not 5-V tolerant.
2 BCK input BCK is the audio data bit clock input, with a 50-kΩ typical internal pull-down and Schmitt-trigger input that is not 5-V tolerant.
3 DIN input DIN is the audio data input, a Schmitt-trigger input that is not 5-V tolerant.
4 RST input RST is the reset and power-down control input, active low, with a 50-kΩ typical internal pull-down and 5-V tolerance.
5 SCKI input SCKI is the system clock input, which is 5-V tolerant.
6 VDD power_in VDD is the digital power supply, +3.3 V.
7 DGND power_in DGND is the digital ground.
8 VCC1 power_in VCC1 is analog power supply 1, +5 V.
9 VCOM passive VCOM is the voltage common decoupling pin, which sits at 0.5 × VCC1 with a 7.5-kΩ typical output impedance.
10 AGND1 power_in AGND1 is analog ground 1.
11 VOUTL- output VOUTL- is the negative analog output of the DAC left channel, forming a differential output of 8 VPP.
12 VOUTL+ output VOUTL+ is the positive analog output of the DAC left channel, forming a differential output of 8 VPP.
13 VOUTR+ output VOUTR+ is the positive analog output of the DAC right channel, forming a differential output of 8 VPP.
14 VOUTR- output VOUTR- is the negative analog output of the DAC right channel, forming a differential output of 8 VPP.
15 AGND2 power_in AGND2 is analog ground 2.
16 VCC2 power_in VCC2 is analog power supply 2, +5 V.
17 AMUTEI input AMUTEI is the analog mute control input, active low, and is 5-V tolerant.
18 ZERO2/AMUTEO output ZERO2/AMUTEO is the zero detect flag output 2 (default) or the analog mute control status output, active low, selected by the MZSEL bit; AMUTEO is open-drain.
19 ZERO1 output ZERO1 is the zero detect flag output 1, which goes high when the input data of the assigned channels stay at '0' for 1024 LRCK periods by default.
20 MODE input MODE is the control port mode selection input: tied to VDD selects SPI with ADR6 = 1, a 220-kΩ pull-up selects SPI with ADR6 = 0, a 220-kΩ pull-down selects hardware auto mode, and tied to DGND selects I2C.
21 MD/SDA/DEMP bidirectional MD/SDA/DEMP is the SPI serial data input, the I2C data input/output, or the de-emphasis control input in hardware control mode, and is 5-V tolerant with open-drain output in out mode.
22 MC/SCL/FMT input MC/SCL/FMT is the SPI clock, the I2C clock, or the audio format select input in hardware control mode, and is 5-V tolerant.
23 MS/ADR0/RSV input MS/ADR0/RSV is the SPI chip select, the I2C address select 0, or a reserved pin set low in hardware control mode, with a 50-kΩ typical internal pull-down and 5-V tolerance.
24 ADR5/ADR1/RSV input ADR5/ADR1/RSV is the SPI address select 5, the I2C address select 1, or a reserved pin set low in hardware control mode, and is 5-V tolerant.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category ADC/DAC/Data Conversion
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog supply voltage VCC 4.5 5 5.5 V 2
Digital supply voltage VDD 3 3.3 3.6 V 2
Operating free-air temperature TA -40 25 105 °C PCM1789-Q1 consumer grade 2
Supply voltage VCC1, VCC2 VCC1, VCC2 -0.3 6.5 V 2
Supply voltage VDD VDD -0.3 4 V 2
Ground voltage differences AGND1, AGND2, DGND -0.1 0.1 V 2
Supply voltage differences VCC1, VCC2 -0.1 0.1 V 2
Digital input voltage RST, ADR5, MS, MC, MD, SCKI, AMUTEI -0.3 6.5 V 2
Digital input voltage BCK, LRCK, DIN, MODE, ZERO1, ZERO2 -0.3 4 V Limited to VDD + 0.3 2
Analog input voltage VCOM, VOUTL±, VOUTR± -0.3 6.5 V Limited to VCC + 0.3 2
Input current (all pins except supplies) -10 10 mA 2
Ambient temperature under bias -40 125 °C 2
Storage temperature TSTORE -55 150 °C 2
Junction temperature TJ 150 °C 2
Lead temperature 260 °C Soldering, 5 s 2
Package temperature 260 °C IR reflow, peak 2
Analog output load capacitance 50 pF 2
Digital output load capacitance 20 pF 2
Analog output load resistance 5 kΩ To ac-coupled GND 2
Analog output load resistance 15 kΩ To dc-coupled GND 2
Sampling frequency LRCK fS 8 192 kHz 2
System clock frequency SCKI SCKI 2.048 36.864 MHz 2
Input logic level VIL VIL 0.8 V Notes (1)(2): BCK, LRCK, DIN 3
Input logic level VIH VIH 2 V Notes (1)(2): BCK, LRCK, DIN 3
Input logic level VIH VIH 2 5.5 V Notes (3)(4): SCKI, ADR5/ADR1/RSV, MC/SCL/FMT, MD/SDA/DEMP, AMUTEI, RST, MS/ADR0/RSV 3
Output logic level VOH VOH 2.4 V IOUT = -4 mA 3
Output logic level VOL VOL 0.4 V IOUT = +4 mA 3
Input logic current IIH IIH -10 10 μA VIN = VDD, notes (2)(3) 3
Input logic current IIL IIL -10 10 μA VIN = 0 V, notes (2)(3) 3
Input logic current IIH IIH 65 100 μA VIN = VDD, notes (1)(4) 3
VCOM output impedance 7.5 kΩ 3
Allowable VCOM output source/sink current 1 μA 3
Gain mismatch channel-to-channel -6 2 6 % of FSR 4
Gain error -6 2 6 % of FSR 4
Bipolar zero error -1 1 % of FSR 4
Passband ripple -0.0018 0.0018 dB < 0.454 × fS, 0.432 × fS 4
Passband ripple -0.0013 0.0013 dB < 0.328 × fS, slow roll-off 5
De-emphasis error -0.1 0.1 dB 5
Voltage range VCC1/2 VCC1/2 4.5 5 5.5 V 5
Voltage range VDD VDD 3 3.3 3.6 V 5
Supply current ICC ICC 19 28 mA fS = 48 kHz 5
Supply current ICC full power-down ICC 170 μA Full power-down, SCKI, BCK, and LRCK stopped 5
Supply current IDD IDD 18 30 mA fS = 48 kHz 5
Supply current IDD full power-down IDD 60 μA Full power-down, SCKI, BCK, and LRCK stopped 5
Power dissipation 154 239 mW fS = 48 kHz 5
Power dissipation full power-down 1.05 mW Full power-down, SCKI, BCK, and LRCK stopped 5
Operating temperature TA -40 85 °C PCM1789-Q1 consumer grade, temperature range table 5
Thermal resistance junction-to-ambient θJA 115 °C/W TSSOP-24 5

CAD (KiCad official)

  • Symbol: PCM1789TPWRQ1
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: pcm1789tpwrq1-etched.step / pcm1789tpwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcm1789tpwrq1.step / pcm1789tpwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 2b6075e0dc2fde28, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF