Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MKL25Z128VFT4

NXP Semicon · Pre-ordered MCUs · QFN-48-EP(7x7)

MKL25Z128VFT4 from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Digital supply pin; the device voltage range is 1.71 to 3.6 V.
2 VSS power_in Digital ground pin.
3 USB0_DP bidirectional USB full-/low-speed D+ data line of the on-chip USB On-the-Go transceiver.
4 USB0_DM bidirectional USB full-/low-speed D- data line of the on-chip USB On-the-Go transceiver.
5 VOUT33 power_out 3.3 V output of the on-chip USB 5 V to 3.3 V regulator.
6 VREGIN power_in Input supply to the on-chip USB 5 V to 3.3 V regulator.
7 PTE20 bidirectional Port E bit 20 GPIO, with ADC0_DP0/ADC0_SE0 analog function and TPM1_CH0 and UART0_TX alternate functions.
8 PTE21 bidirectional Port E bit 21 GPIO, with ADC0_DM0/ADC0_SE4a analog function and TPM1_CH1 and UART0_RX alternate functions.
9 VDDA power_in Analog supply pin.
10 VREFH power_in High-side voltage reference pin (VREFH).
11 VREFL power_in Low-side voltage reference pin (VREFL).
12 VSSA power_in Analog ground pin.
13 PTE29 bidirectional Port E bit 29 GPIO, with CMP0_IN5/ADC0_SE4b analog input and TPM0_CH2 and TPM_CLKIN0 alternate functions.
14 PTE30 bidirectional Port E bit 30 GPIO, with DAC0_OUT/ADC0_SE23/CMP0_IN4 analog function and TPM0_CH3 and TPM_CLKIN1 alternate functions.
15 PTE24 bidirectional Port E bit 24 GPIO, with TPM0_CH0 and I2C0_SCL alternate functions.
16 PTE25 bidirectional Port E bit 25 GPIO, with TPM0_CH1 and I2C0_SDA alternate functions.
17 PTA0 bidirectional Port A bit 0 GPIO, with SWD_CLK debug clock and TSI0_CH1 and TPM0_CH5 functions listed for this pin.
18 PTA1 bidirectional Port A bit 1 GPIO, with TSI0_CH2, UART0_RX and TPM2_CH0 functions listed for this pin.
19 PTA2 bidirectional Port A bit 2 GPIO, with TSI0_CH3, UART0_TX and TPM2_CH1 functions listed for this pin.
20 PTA3 bidirectional Port A bit 3 GPIO, with SWD_DIO debug data and TSI0_CH4, I2C1_SCL and TPM0_CH0 functions listed for this pin.
21 PTA4 bidirectional Port A bit 4 GPIO, with NMI_b non-maskable interrupt and TSI0_CH5, I2C1_SDA and TPM0_CH1 functions listed for this pin.
22 VDD power_in Digital supply pin; the device voltage range is 1.71 to 3.6 V.
23 VSS power_in Digital ground pin.
24 PTA18 bidirectional Port A bit 18 GPIO; default function is EXTAL0 oscillator input, with UART1_RX and TPM_CLKIN0 alternate functions.
25 PTA19 bidirectional Port A bit 19 GPIO; default function is XTAL0 oscillator output, with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1 alternate functions.
26 PTA20 input Default function is RESET_b, the device reset pin; the same pin can also be used as GPIO PTA20.
27 PTB0/LLWU_P5 bidirectional Port B bit 0 GPIO, with ADC0_SE8/TSI0_CH0 analog function, LLWU_P5 wakeup input, and I2C0_SCL and TPM1_CH0 alternate functions.
28 PTB1 bidirectional Port B bit 1 GPIO, with ADC0_SE9/TSI0_CH6 analog function and I2C0_SDA and TPM1_CH1 alternate functions.
29 PTB2 bidirectional Port B bit 2 GPIO, with ADC0_SE12/TSI0_CH7 analog function and I2C0_SCL and TPM2_CH0 alternate functions.
30 PTB3 bidirectional Port B bit 3 GPIO, with ADC0_SE13/TSI0_CH8 analog function and I2C0_SDA and TPM2_CH1 alternate functions.
31 PTB16 bidirectional Port B bit 16 GPIO, with TSI0_CH9 function and SPI1_MOSI, SPI1_MISO, UART0_RX and TPM_CLKIN0 alternate functions.
32 PTB17 bidirectional Port B bit 17 GPIO, with TSI0_CH10 function and SPI1_MISO, SPI1_MOSI, UART0_TX and TPM_CLKIN1 alternate functions.
33 PTC0 bidirectional Port C bit 0 GPIO, with ADC0_SE14/TSI0_CH13 analog function and EXTRG_IN and CMP0_OUT alternate functions.
34 PTC1/LLWU_P6/RTC_CLKIN bidirectional Port C bit 1 GPIO, with ADC0_SE15/TSI0_CH14 analog function, LLWU_P6 wakeup input, RTC_CLKIN, and I2C1_SCL and TPM0_CH0 alternate functions.
35 PTC2 bidirectional Port C bit 2 GPIO, with ADC0_SE11/TSI0_CH15 analog function and I2C1_SDA and TPM0_CH1 alternate functions.
36 PTC3/LLWU_P7 bidirectional Port C bit 3 GPIO, with LLWU_P7 wakeup input and UART1_RX, TPM0_CH2 and CLKOUT alternate functions.
37 PTC4/LLWU_P8 bidirectional Port C bit 4 GPIO, with LLWU_P8 wakeup input and SPI0_PCS0, UART1_TX and TPM0_CH3 alternate functions.
38 PTC5/LLWU_P9 bidirectional Port C bit 5 GPIO, with LLWU_P9 wakeup input and SPI0_SCK, LPTMR0_ALT2 and CMP0_OUT alternate functions.
39 PTC6/LLWU_P10 bidirectional Port C bit 6 GPIO, with CMP0_IN0 analog input, LLWU_P10 wakeup input, and SPI0_MOSI, EXTRG_IN and SPI0_MISO alternate functions.
40 PTC7 bidirectional Port C bit 7 GPIO, with CMP0_IN1 analog input and SPI0_MISO and SPI0_MOSI alternate functions.
41 PTD0 bidirectional Port D bit 0 GPIO, with SPI0_PCS0 and TPM0_CH0 alternate functions.
42 PTD1 bidirectional Port D bit 1 GPIO, with ADC0_SE5b analog function and SPI0_SCK and TPM0_CH1 alternate functions.
43 PTD2 bidirectional Port D bit 2 GPIO, with SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO alternate functions.
44 PTD3 bidirectional Port D bit 3 GPIO, with SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI alternate functions.
45 PTD4/LLWU_P14 bidirectional Port D bit 4 GPIO, with LLWU_P14 wakeup input and SPI1_PCS0, UART2_RX and TPM0_CH4 alternate functions.
46 PTD5 bidirectional Port D bit 5 GPIO, with ADC0_SE6b analog function and SPI1_SCK, UART2_TX and TPM0_CH5 alternate functions.
47 PTD6/LLWU_P15 bidirectional Port D bit 6 GPIO, with ADC0_SE7b analog function, LLWU_P15 wakeup input, and SPI1_MOSI, UART0_RX and SPI1_MISO alternate functions.
48 PTD7 bidirectional Port D bit 7 GPIO, with SPI1_MISO, UART0_TX and SPI1_MOSI alternate functions.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 5
Solder temperature, lead-free TSDR 260 °C 5
Electrostatic discharge voltage, human body model VHBM -2000 2000 V 5
Electrostatic discharge voltage, charged-device model VCDM -500 500 V 5
Latch-up current ILAT -100 100 mA Ambient temperature of 105 °C 5
Digital supply voltage VDD -0.3 3.8 V 6
Digital supply current IDD 120 mA 6
Instantaneous maximum current single pin limit ID -25 25 mA Applies to all port pins 6
USB_DP input voltage VUSB_DP -0.3 3.63 V 6
USB_DM input voltage VUSB_DM -0.3 3.63 V 6
USB regulator input VREGIN -0.3 6 V 6
Supply voltage VDD 1.71 3.6 V 7
Analog supply voltage VDDA 1.71 3.6 V 7
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 7
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 7
Flash write voltage range 1.71 3.6 V 2
Temperature range (ambient) -40 105 °C 2
IO pin negative DC injection current, single pin IICIO -3 mA VIN < VSS-0.3V 7
Contiguous pin DC injection current, regional limit IICcont -25 mA Negative current injection; includes sum of negative injection currents of 16 contiguous pins 7
VDD voltage required to retain RAM VRAM 1.2 V 7
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 7
Total deviation of trimmed average DCO output frequency over voltage and temperature Δfdco_t -3 3 %fdco Over voltage and temperature 22
Total deviation of trimmed average DCO output frequency over fixed voltage and temperature range Δfdco_t -1.5 0.4 1.5 %fdco Fixed voltage and temperature range of 0-70 °C 22
Frequency deviation of internal reference clock (fast clock) over temperature and voltage Δfintf_ft -3 3 %fintf_ft Factory trimmed at nominal VDD and 25 °C 22
Internal reference frequency (fast clock) fintf_t 3 5 MHz User trimmed at nominal VDD and 25 °C 22
FLL reference frequency range ffll_ref 31.25 39.0625 kHz 22
DCO output frequency range fdco 20 20.97 25 MHz Low range (DRS = 00); 640 × ffll_ref 22
DCO output frequency range fdco 40 41.94 48 MHz Mid range (DRS = 01); 1280 × ffll_ref 22
FLL target frequency acquisition time tfll_acquire 1 ms 22
VCO operating frequency fvco 48 100 MHz 22
PLL reference frequency range fpll_ref 2 4 MHz 22
Oscillator crystal or resonator frequency, low-frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 25
Oscillator crystal or resonator frequency, high-frequency mode (low range) fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 25
Oscillator crystal or resonator frequency, high-frequency mode (high range) fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 25
Input clock frequency (external clock mode) fec_extal 48 MHz 25
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % 25
Supply current, high-speed mode IDDHS 200 μA EN = 1, PMODE = 1 32
Supply current, low-speed mode IDDLS 20 μA EN = 1, PMODE = 0 32
Analog input offset voltage VAIO 20 mV 32
Output low VCMPOl 0.5 V 32
Analog comparator initialization delay 40 μs 32
6-bit DAC integral non-linearity INL -0.5 0.5 LSB 32
6-bit DAC differential non-linearity DNL -0.3 0.3 LSB 32
Longword Program high-voltage time thvpgm4 7.5 18 μs 26
Sector Erase high-voltage time thversscr 13 113 ms 26
Erase All high-voltage time thversall 52 452 ms 26
Read 1s Section execution time (flash sector) trd1sec1k 60 μs Assumes 25 MHz flash clock frequency 26
Program Check execution time tpgmchk 45 μs Assumes 25 MHz flash clock frequency 26
Read Resource execution time trdrsrc 30 μs Assumes 25 MHz flash clock frequency 26
Program Longword execution time tpgm4 65 145 μs 26
Erase Flash Sector execution time tersscr 14 114 ms 26
Read 1s All Blocks execution time trd1all 1.8 ms 26
Read Once execution time trdonce 25 μs Assumes 25 MHz flash clock frequency 26
Erase All Blocks execution time tersall 88 650 ms 26
Verify Backdoor Access Key execution time tvfykey 30 μs Assumes 25 MHz flash clock frequency 26
Average current adder during high voltage flash programming operation IDD_PGM 2.5 6 mA 26
Average current adder during high voltage flash erase operation IDD_ERS 1.5 4 mA 26
Lock entry frequency tolerance Dlock -1.49 2.98 % 23
Lock exit frequency tolerance Dunl -4.47 5.97 % 23

CAD (KiCad official)

  • Symbol: MKL25Z128VFT4
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: mkl25z128vft4-etched.step / mkl25z128vft4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl25z128vft4.step / mkl25z128vft4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (59 pp, sha256 e42271b7f612ac1b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF