component
LM75BIMX-5
Public Made by Adomby adom
Texas Instruments Temperature Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM75BIMX-5
Texas Instruments · Temperature Sensors · SOIC-8
LM75BIMX-5 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | I2C Serial Bi-Directional Data Line with Open Drain output, supports 400 kHz bus frequency and requires external pullup resistor. |
| 2 | SCL | input | I2C Clock Input from master controller, Open Drain capable, external pullup resistor required, no clock generated by LM75. |
| 3 | O.S. | tri_state | Over-temperature Shutdown output with Open Drain topology, maximum output sink current 10 mA and output saturation voltage 0.8 V at 4.0 mA. |
| 4 | GND | power_in | Power Supply Ground. |
| 5 | A2 | input | User-programmable I2C Address input pin, connect to ground for logic 0 or +VS for logic 1 to configure slave address. |
| 6 | A1 | input | User-programmable I2C Address input pin, connect to ground for logic 0 or +VS for logic 1 to configure slave address. |
| 7 | A0 | input | User-programmable I2C Address input pin, connect to ground for logic 0 or +VS for logic 1 to configure slave address. |
| 8 | +VS | power_in | Positive Supply Voltage input, operating range 3 V to 5.5 V, requires 100 nF bypass capacitor and 10 µF bulk capacitance in near vicinity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM75BIMX-5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm75bimx-5-etched.step/lm75bimx-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm75bimx-5.step/lm75bimx-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
565c6841c4c6520e, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).