3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX1487EESA+T
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8
MAX1487EESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: goes high if A > B by 200mV and low if A < B by 200mV. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs are enabled by bringing DE high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y (A) low and output Z (B) high, and a high on DI forces Y (A) high and Z (B) low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output (RS-485 bus line A). |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (RS-485 bus line B). |
| 8 | VCC | power_in | Positive supply: 4.75V ≤ VCC ≤ 5.25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 4mA, VID = -200mV | 2 | ||
| Receiver Output High Voltage | VOH | 3.5 | V | IO = -4mA, VID = 200mV | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | R = 27Ω or 50Ω, Figure 8 | 2 | ||
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | 0.2 | V | R = 27Ω or 50Ω, Figure 8 | 2 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States | ΔVOD | 0.2 | V | R = 27Ω or 50Ω, Figure 8 | 2 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 2 | ||
| Input Current | IIN1 | -2 | 2 | µA | MAX487E/MAX1487E, DE = 0V, VCC = 0V or 5.25V | 2 | |
| Differential Driver Output (no load) | VOD1 | 5 | V | no load | 2 | ||
| Differential Driver Output (with load), RS-422 | VOD2 | 1.5 | 5 | V | R = 50Ω (RS-422) | 2 | |
| Differential Driver Output (with load), RS-485 | VOD2 | 2 | V | R = 27Ω (RS-485), Figure 8 | 2 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 2 | |
| Receiver Input Resistance | RIN | 48 | kΩ | -7V ≤ VCM ≤ 12V, MAX487E/MAX1487E | 2 | ||
| Input Current (A, B) | IIN2 | 0.25 | mA | VIN = 12V | 2 | ||
| Input Current (A, B) | IIN2 | -0.2 | mA | VIN = -7V | 2 | ||
| Three-State (high impedance) Output Current at Receiver | IOZR | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 2 | |
| Receiver Short-Circuit Current | IOSR | 7 | 95 | mA | 0V ≤ VO ≤ VCC | 3 | |
| Driver Short-Circuit Current, VO = Low | IOSD2 | 35 | 250 | mA | -7V ≤ VO ≤12V (Note 4) | 3 | |
| Driver Short-Circuit Current, VO = High | IOSD1 | 35 | 250 | mA | -7V ≤ VO ≤12V (Note 4) | 3 | |
| No-Load Supply Current (Note 3) | ICC | 250 | 400 | µA | MAX1487E, RE = 0V or VCC, DE = 0V | 3 | |
| No-Load Supply Current (Note 3) | ICC | 350 | 650 | µA | MAX1487E, RE = 0V or VCC, DE = VCC | 3 | |
| Driver Rise or Fall Time | tR, tF | 3 | 20 | 40 | ns | Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Enable to Output High | tZH | 45 | 70 | ns | Figures 11 and 13 | 3 | |
| Driver Enable to Output Low | tZL | 45 | 70 | ns | Figures 11 and 13 | 3 | |
| Driver Disable Time from Low | tLZ | 45 | 70 | ns | Figures 11 and 13 | 3 | |
| Driver Disable Time from High | tHZ | 45 | 70 | ns | Figures 11 and 13 | 3 | |
| Driver Input to Output (low-to-high) | tPLH | 40 | 60 | ns | Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Driver Input to Output (high-to-low) | tPHL | 40 | 60 | ns | Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Driver Output Skew to Output | tSKEW | 5 | 10 | ns | Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Receiver Enable to Output Low | tZL | 20 | 50 | ns | Figures 9 and 15, CRL = 15pF, S1 closed | 3 | |
| Receiver Enable to Output High | tZH | 20 | 50 | ns | Figures 9 and 15, CRL = 15pF, S2 closed | 3 | |
| Receiver Disable Time from Low | tLZ | 20 | 50 | ns | Figures 9 and 15, CRL = 15pF, S1 closed | 3 | |
| Receiver Disable Time from High | tHZ | 20 | 50 | ns | Figures 9 and 15, CRL = 15pF, S2 closed | 3 | |
| Maximum Data Rate | fMAX | 2.5 | Mbps | 3 | |||
| Operating Temperature Range (MAX1487EE_A) | TA | -40 | 85 | °C | MAX1487EE_A | 2 | |
| Supply Voltage | VCC | 12 | V | 2 | |||
| Control Input Voltage (RE, DE) | -0.5 | V | 2 | ||||
| Driver Input Voltage (DI) | -0.5 | V | 2 | ||||
| Driver Output Voltage (Y, Z; A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Input Voltage (A, B) | -8 | 12.5 | V | 2 | |||
| Receiver Output Voltage (RO) | -0.5 | V | 2 | ||||
| Storage Temperature Range | TSTG | -65 | 160 | °C | 2 | ||
| Lead Temperature (soldering, 10 sec) | 300 | °C | soldering, 10sec | 2 |
CAD (KiCad official)
- Symbol:
MAX1487EESA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max1487eesa-t-etched.step/max1487eesa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max1487eesa-t.step/max1487eesa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (16 pp, sha256
273f114f0ec895b5, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).