component
LMR10530XSD
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLMR10530XSD
Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)
LMR10530XSD from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VINC | power_in | Input supply for internal bias and control circuitry. Need to locally bypass this pin to GND. |
| 2 | EN | input | Enable control input. Logic high enables operation. Do not allow this pin to float or subject to voltages greater than VIN + 0.3V. |
| 3 | SGND | power_in | Signal (analog) ground. Place the bottom resistor of the feedback network as close as possible to this pin for good load regulation. |
| 4 | NC | unconnected | No user function, connect this pin to GND. |
| 5 | FB | input | Feedback pin. Connect this pin to the external resistor divider to set output voltage. |
| 6 | PGND | power_in | Power ground pin. Provides ground return path for the internal driver. |
| 7 | SW | output | Switch pin. Connect this pin to the inductor and catch diode. |
| 8 | SW | output | Switch pin. Connect this pin to the inductor and catch diode. |
| 9 | VIND | power_in | Input supply voltage. Connect a bypass capacitor locally from these pins to PGND. |
| 10 | VIND | power_in | Input supply voltage. Connect a bypass capacitor locally from these pins to PGND. |
| 11 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LMR10530XSD - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lmr10530xsd-etched.step/lmr10530xsd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr10530xsd.step/lmr10530xsd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
9b4e82ae74112432, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).