component
TPS7A7200RGTT
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A7200RGTT
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-16-EP(3x3)
TPS7A7200RGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SNS | input | Output voltage sense input pin for feedback regulation of the regulator output. |
| 2 | FB | input | Output voltage feedback pin connected to the error amplifier; connect 220-pF ceramic capacitor from this pin to OUT. |
| 3 | PG | output | Active-high open-drain power-good output indicating when regulated output voltage reaches 90% of target. |
| 4 | 50mV | input | Output voltage setting pin; connect to ground to increase output voltage by 50 mV or leave floating when not in use. |
| 5 | 100mV | input | Output voltage setting pin; connect to ground to increase output voltage by 100 mV or leave floating when not in use. |
| 6 | 200mV | input | Output voltage setting pin; connect to ground to increase output voltage by 200 mV or leave floating when not in use. |
| 7 | GND | power_in | Ground pin; connect to large-area ground plane. |
| 8 | 400mV | input | Output voltage setting pin; connect to ground to increase output voltage by 400 mV or leave floating when not in use. |
| 9 | 800mV | input | Output voltage setting pin; connect to ground to increase output voltage by 800 mV or leave floating when not in use. |
| 10 | 1.6V | input | Output voltage setting pin; connect to ground to increase output voltage by 1.6 V or leave floating when not in use. |
| 11 | SS | input | Soft-start control pin; leave open for default soft-start or connect external capacitor to ground to enable RC-delay soft-start circuit. |
| 12 | EN | input | Enable control pin; logic high enables device operation, logic low disables device. |
| 13 | IN | power_in | Unregulated supply voltage input pin; connect input capacitor to this pin. |
| 14 | IN | power_in | Unregulated supply voltage input pin; connect input capacitor to this pin. |
| 15 | OUT | power_out | Regulated output voltage pin; minimum 4.7-μF capacitance required for stability. |
| 16 | OUT | power_out | Regulated output voltage pin; minimum 4.7-μF capacitance required for stability. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS7A7200RGTT - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps7a7200rgtt-etched.step/tps7a7200rgtt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a7200rgtt.step/tps7a7200rgtt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
5cbf29e76f81c0a6, retrieved 2026-10-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).