component
OP07CSX
Public Made by Adomby adom
Shenzhen JingYang Operational Amplifier, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOP07CSX
Shenzhen JingYang · Operational Amplifier · SO-8
OP07CSX from Shenzhen JingYang, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS TRIM | passive | Offset null trim terminal, used with a 20kΩ potentiometer to V+ for an offset adjustment range of typically ±4mV. |
| 2 | -IN | input | Inverting input; differential input voltage is limited to ±30V and input voltage to ±22V (not above the supply if supply is below ±22V). |
| 3 | +IN | input | Non-inverting input; input voltage range is typically ±14V at ±15V supply, with differential input limited to ±30V. |
| 4 | V- | power_in | Negative supply; supply range is ±3V to ±18V, absolute maximum ±22V. |
| 5 | N.C. | unconnected | No internal connection. |
| 6 | OUT | output | Amplifier output; typical swing ±12.8V into 2kΩ at ±15V supply, short-circuit duration indefinite. |
| 7 | V+ | power_in | Positive supply; supply range is ±3V to ±18V, absolute maximum ±22V. |
| 8 | VOS TRIM | passive | Offset null trim terminal, used with a 20kΩ potentiometer to V+ for an offset adjustment range of typically ±4mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SO-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
OP07CSX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
op07csx-etched.step/op07csx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op07csx.step/op07csx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (11 pp, sha256
ea7fa18ac0136ecd, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).