Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS76633DR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

TPS76633DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC/FB unconnected Not internally connected for fixed 3.3V version; leave open or tie to ground for improved thermal performance.
2 PG tri_state Power-good open-drain output; pulled low when output voltage falls below threshold; requires external pullup resistor.
3 GND power_in Ground pin.
4 EN input Enable input; driving low enables device output, driving high (above 1.2V typical) disables device output.
5 IN power_in Input voltage supply pin; rated 2.5V to 16V DC; place 1µF minimum input capacitor close to IN and GND pins.
6 IN power_in Input voltage supply pin; rated 2.5V to 16V DC; place input capacitor close to IN and GND pins for noise reduction.
7 OUT power_out Regulated 3.3V output voltage pin supplying up to 250mA; place 2.2µF to 220µF output capacitor (ESR up to 2Ω) close to OUT and GND pins.
8 OUT power_out Regulated output voltage pin; place output capacitor (2.2µF to 220µF, ESR up to 2Ω) close to OUT and GND pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: TPS76633DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps76633dr-etched.step / tps76633dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76633dr.step / tps76633dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 43cfa370a86e4a2d, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF