Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

X9C104SIZT1

Intersil(Renesas Electronics) · Digital Potentiometers · SOIC-8

X9C104SIZT1 from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INC input The INC input is negative-edge triggered; toggling INC moves the wiper and increments or decrements the counter in the direction set by U/D.
2 U/D input The U/D input controls the direction of wiper movement and whether the counter is incremented or decremented.
3 RH/VH passive High terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V.
4 VSS power_in Ground reference (VSS) for the device.
5 VW/RW passive Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with a typical series resistance of 40Ω.
6 RL/VL passive Low terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V.
7 CS input The device is selected when CS is LOW; the counter value is stored in nonvolatile memory when CS returns HIGH while INC is HIGH.
8 VCC power_in Supply voltage, specified as 5V ±10% for the X9C102/103/104/503 family.

Key specifications

Parameter Value
Manufacturer Intersil(Renesas Electronics)
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
End to end resistance variation RTOTAL -20 20 % 4
VH terminal voltage VVH/RH -5 5 V 4
VL terminal voltage VVL/RL -5 5 V 4
Wiper current IW -4.4 4.4 mA 4
Absolute linearity -1 1 MI VW(n)(actual) - VW(n)(expected) 4
Relative linearity -0.2 0.2 MI VW(n + 1)(actual) - [VW(n) + MI] 4
RTOTAL temperature coefficient (X9C103/503/104) RTOTAL -300 300 ppm/°C X9C103/503/104 4
Ratiometric temperature coefficient -20 20 ppm/°C 4
Wiper resistance RW 40 100 Ω Wiper Current = ±1mA 4
VCC active current ICC 1 3 mA CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V @ max. tCYC 5
Standby supply current ISB 200 750 µA CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V 5
CS, INC, U/D input leakage current ILI -10 10 µA VIN = VSS to VCC 5
CS, INC, U/D input HIGH voltage VIH 2 V 5
CS, INC, U/D input LOW voltage VIL 0.8 V 5
CS, INC, U/D input capacitance CIN 10 pF VCC = 5V, VIN = VSS, TA = 25°C, f = 1MHz 5
CS to INC setup tCI 100 ns 6
INC HIGH to U/D change tID 100 ns 6
U/D to INC setup tDI 2.9 µs 6
INC LOW period tIL 1 µs 6
INC HIGH period tIH 1 µs 6
INC inactive to CS inactive tIC 1 µs 6
CS deselect time (STORE) tCPH 20 ms 6
CS deselect time (NO STORE) tCPH 100 ns 6
INC to VW/RW change tIW 100 µs 6
INC cycle time tCYC 2 µs 6
INC input rise and fall time tR, tF 500 µs 6
Power-up to wiper stable tPU 500 µs 6
VCC power-up rate tR VCC 0.2 50 V/ms 6
Supply voltage VCC VCC -10 10 % 5V ±10% 4
Commercial operating temperature TA 0 70 °C Commercial 4
Industrial operating temperature TA -40 85 °C Industrial 4
Temperature under bias -65 135 °C 4
Storage temperature -65 150 °C 4
Voltage on CS, INC, U/D and VCC with respect to VSS VCC -1 7 V 4
Voltage on VH/RH and VL/RL referenced to VSS VH/RH, VL/RL -8 8 V 4
Terminal voltage difference ΔV = /VH/RH - VL/RL/ (X9C104) ΔV 10 V X9C103, X9C503, and X9C104 4
Lead temperature (soldering, 10 seconds) 300 °C 4
Power rating (X9C103/104/503) 10 mW X9C103/104/503 4
Nominal resistance (end to end, X9C104) RTOTAL 100 kΩ X9C104 2
Potentiometer capacitance CH CH 10 pF See Circuit #3, Macro Model 4
Potentiometer capacitance CL CL 10 pF See Circuit #3, Macro Model 4
Potentiometer capacitance CW CW 25 pF See Circuit #3, Macro Model 4

CAD (KiCad official)

  • Symbol: X9C104SIZT1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: x9c104sizt1-etched.step / x9c104sizt1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x9c104sizt1.step / x9c104sizt1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intersil(Renesas Electronics) datasheet (11 pp, sha256 25548de98d985cbd, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF