Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18LF2620T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC18LF2620T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RE3 when the MCLRE Configuration bit is cleared.
2 RA0/AN0 bidirectional PORTA digital I/O (TTL) or analog input 0.
3 RA1/AN1 bidirectional PORTA digital I/O (TTL) or analog input 1.
4 RA2/AN2/VREF-/CVREF bidirectional PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output.
5 RA3/AN3/VREF+ bidirectional PORTA digital I/O, analog input 3, or A/D reference voltage (high) input.
6 RA4/T0CKI/C1OUT bidirectional PORTA digital I/O (Schmitt Trigger), Timer0 external clock input, or Comparator 1 output.
7 RA5/AN4/SS/HLVDIN/C2OUT bidirectional PORTA digital I/O, analog input 4, SPI slave select input, High/Low-Voltage Detect input, or Comparator 2 output.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 bidirectional Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7.
10 OSC2/CLKO/RA6 bidirectional Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting instruction cycle rate, or general purpose I/O RA6.
11 RC0/T1OSO/T13CKI bidirectional PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input.
12 RC1/T1OSI/CCP2 bidirectional PORTC digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (alternate CCP2 assignment).
13 RC2/CCP1 bidirectional PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC digital I/O, synchronous serial clock for SPI mode, or synchronous serial clock for I2C mode.
15 RC4/SDI/SDA bidirectional PORTC digital I/O, SPI data in, or I2C data I/O.
16 RC5/SDO bidirectional PORTC digital I/O or SPI data out.
17 RC6/TX/CK bidirectional PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock.
18 RC7/RX/DT bidirectional PORTC digital I/O, EUSART asynchronous receive, or EUSART synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins; LF devices operate over 2.0V to 5.5V.
21 RB0/INT0/FLT0/AN12 bidirectional PORTB digital I/O with optional weak pull-up, external interrupt 0, PWM Fault input, or analog input 12.
22 RB1/INT1/AN10 bidirectional PORTB digital I/O with optional weak pull-up, external interrupt 1, or analog input 10.
23 RB2/INT2/AN8 bidirectional PORTB digital I/O with optional weak pull-up, external interrupt 2, or analog input 8.
24 RB3/AN9/CCP2 bidirectional PORTB digital I/O, analog input 9, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 assignment per Note 1).
25 RB4/KBI0/AN11 bidirectional PORTB digital I/O, interrupt-on-change pin, or analog input 11.
26 RB5/KBI1/PGM bidirectional PORTB digital I/O, interrupt-on-change pin, or Low-Voltage ICSP programming enable pin.
27 RB6/KBI2/PGC bidirectional PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin.
28 RB7/KBI3/PGD bidirectional PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating VDD range (LF devices) VDD 2 5.5 V Low-voltage parts designated LF (e.g. PIC18LF2620) 10
Operating frequency 0 40 MHz DC, 40 MHz 11
Recommended RC oscillator resistor REXT 3 100 kΩ RC oscillator mode 27
Recommended RC oscillator capacitor CEXT 20 pF CEXT > 20 pF 27
Maximum recommended analog source impedance RS 2.5 kΩ A/D analog sources 230

CAD (KiCad official)

  • Symbol: PIC18LF2620T-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18lf2620t-i-etched.step / pic18lf2620t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18lf2620t-i.step / pic18lf2620t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (412 pp, sha256 0bfeed6e8738d71f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF