component
LM25010MH
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM25010MH
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM25010MH from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |
| 2 | SW | output | Switching node connected to buck switch source; internally driven, voltage rating -1.5V to 45V relative to RTN. |
| 3 | BST | input | Bootstrap pin for gate driver capacitor; connects 0.022µF capacitor from SW, charged from VCC during OFF-time; maximum 59V to RTN, 14V to VCC. |
| 4 | ISEN | input | Current sense input; inductor current flows out during OFF-time through 130mΩ internal sense resistor; threshold 1.25A typical (1.0A to 1.5A range). |
| 5 | SGND | power_in | Current sense ground return; recirculating current flows into this pin to the current sense resistor; maximum ±0.3V relative to RTN. |
| 6 | RTN | power_in | Reference ground return for all internal circuitry except the current sense resistor; baseline for absolute voltage ratings. |
| 7 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |
| 8 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |
| 9 | FB | input | Feedback voltage input from regulated output; compared to 2.5V ±2% regulation reference and 2.9V overvoltage threshold; input bias current <1nA. |
| 10 | SS | input | Soft start capacitor pin; charged by internal 11.5µA current source to 2.5V during startup; voltage rating 4V maximum to RTN. |
| 11 | RON/SD | input | ON-time control resistor input and shutdown pin; external resistor from VIN sets ON-time; grounding disables regulator with 0.7V threshold and 40mV hysteresis. |
| 12 | VCC | power_in | Bias regulator output; 6.6V to 7.4V for VIN ≥ 8.9V, tracks VIN ±100mV for VIN < 8.9V; absolute maximum 14V to RTN. |
| 13 | VIN | power_in | Input supply voltage; operating range 6V to 42V nominal; absolute maximum 45V to RTN; input bypass capacitors required. |
| 14 | NC | unconnected | No internal connection; may be connected to ground plane for heat dissipation. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM25010MH - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm25010mh-etched.step/lm25010mh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm25010mh.step/lm25010mh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
d5d36a8196d36262, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).