3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSMMBT4403LT1G
onsemi · Bipolar Transistors - BJT · SOT-23
SMMBT4403LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base terminal of the PNP switching transistor; the datasheet specifies emitter-base voltage limits of VEBO −5.0 Vdc and a base cutoff test at VEB = −0.4 Vdc. |
| 2 | EMITTER | passive | Emitter terminal of the PNP transistor, rated for an emitter-base breakdown of V(BR)EBO −5.0 Vdc minimum with IC = 0. |
| 3 | COLLECTOR | passive | Collector terminal of the PNP transistor, rated for a collector-emitter voltage VCEO of −40 Vdc and a continuous collector current IC of −600 mAdc (peak −900 mAdc). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector−Emitter Voltage | VCEO | -40 | Vdc | 1 | |||
| Collector−Base Voltage | VCBO | -40 | Vdc | 1 | |||
| Emitter−Base Voltage | VEBO | -5 | Vdc | 1 | |||
| Collector Current − Continuous | IC | -600 | mAdc | 1 | |||
| Collector Current − Peak | ICM | -900 | mAdc | 1 | |||
| Total Device Dissipation FR−5 Board | PD | 225 | mW | TA = 25°C (Note 1) | 1 | ||
| Derate above 25°C (FR−5 Board) | PD | 1.8 | mW/°C | Derate above 25°C | 1 | ||
| Thermal Resistance, Junction−to−Ambient (FR−5 Board) | RθJA | 556 | °C/W | 1 | |||
| Total Device Dissipation Alumina Substrate | PD | 300 | mW | TA = 25°C (Note 2) | 1 | ||
| Derate above 25°C (Alumina Substrate) | PD | 2.4 | mW/°C | Derate above 25°C | 1 | ||
| Thermal Resistance, Junction−to−Ambient (Alumina Substrate) | RθJA | 417 | °C/W | 1 | |||
| Junction and Storage Temperature | TJ, Tstg | -55 | 150 | °C | 1 | ||
| Collector−Emitter Breakdown Voltage | V(BR)CEO | -40 | Vdc | IC = −1.0 mAdc, IB = 0 (Note 3) | 2 | ||
| Collector−Base Breakdown Voltage | V(BR)CBO | -40 | Vdc | IC = −0.1 mAdc, IE = 0 | 2 | ||
| Emitter−Base Breakdown Voltage | V(BR)EBO | -5 | Vdc | IE = −0.1 mAdc, IC = 0 | 2 | ||
| Base Cutoff Current | IBEV | -0.1 | Adc | VCE = −35 Vdc, VEB = −0.4 Vdc | 2 | ||
| Collector Cutoff Current | ICEX | -0.1 | Adc | VCE = −35 Vdc, VEB = −0.4 Vdc | 2 | ||
| DC Current Gain | hFE | 30 | IC = −0.1 mAdc, VCE = −1.0 Vdc | 2 | |||
| DC Current Gain | hFE | 60 | IC = −1.0 mAdc, VCE = −1.0 Vdc | 2 | |||
| DC Current Gain | hFE | 100 | IC = −10 mAdc, VCE = −1.0 Vdc | 2 | |||
| DC Current Gain | hFE | 100 | 300 | IC = −150 mAdc, VCE = −2.0 Vdc (Note 3) | 2 | ||
| DC Current Gain | hFE | 20 | IC = −500 mAdc, VCE = −2.0 Vdc (Note 3) | 2 | |||
| Collector−Emitter Saturation Voltage | VCE(sat) | -0.4 | Vdc | IC = −150 mAdc, IB = −15 mAdc (Note 3) | 2 | ||
| Collector−Emitter Saturation Voltage | VCE(sat) | -0.75 | Vdc | IC = −500 mAdc, IB = −50 mAdc (Note 3) | 2 | ||
| Base−Emitter Saturation Voltage | VBE(sat) | -0.75 | -0.95 | Vdc | IC = −150 mAdc, IB = −15 mAdc (Note 3) | 2 | |
| Base−Emitter Saturation Voltage | VBE(sat) | -1.3 | Vdc | IC = −500 mAdc, IB = −50 mAdc (Note 3) | 2 | ||
| Current−Gain − Bandwidth Product | fT | 200 | MHz | IC = −20 mAdc, VCE = −10 Vdc, f = 100 MHz | 2 | ||
| Collector−Base Capacitance | Ccb | 8.5 | pF | VCB = −10 Vdc, IE = 0, f = 1.0 MHz | 2 | ||
| Emitter−Base Capacitance | Ceb | 30 | pF | VBE = −0.5 Vdc, IC = 0, f = 1.0 MHz | 2 | ||
| Input Impedance | hie | 1.5 | 15 | k | IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz | 2 | |
| Voltage Feedback Ratio | hre | 0.1 | 8 | X 10−4 | IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz | 2 | |
| Small−Signal Current Gain | hfe | 60 | 500 | IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz | 2 | ||
| Output Admittance | hoe | 1 | 100 | Mhos | IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz | 2 | |
| Delay Time | td | 15 | ns | VCC = −30 Vdc, VEB = −2.0 Vdc, IC = −150 mAdc, IB1 = −15 mAdc | 2 | ||
| Rise Time | tr | 20 | ns | 2 | |||
| Storage Time | ts | 225 | ns | VCC = −30 Vdc, IC = −150 mAdc, IB1 = IB2 = −15 mAdc | 2 | ||
| Fall Time | tf | 30 | ns | 2 |
CAD (KiCad official)
- Symbol:
SMMBT4403LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
smmbt4403lt1g-etched.step/smmbt4403lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smmbt4403lt1g.step/smmbt4403lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
a19fb11c8d11b194, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).