Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1936-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16F1936-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input RE3 is a TTL general purpose input only; when MCLRE is set it serves as MCLR (Master Clear) with an internal pull-up, and as VPP it carries the high-voltage programming voltage.
2 RA0 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with ADC channel AN0, comparator C1/C2 negative input, C2OUT, SR Latch SRNQ, SS, VCAP (PIC16F1936 only) and LCD SEG12, with C2OUT/SRNQ/SS selectable to this pin via APFCON.
3 RA1/AN1/C12IN1-/SEG7 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with ADC channel AN1, comparator C1/C2 negative input and LCD analog output SEG7.
4 RA2 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with ADC channel AN2, comparator C2 positive input, ADC negative voltage reference VREF-, DAC output DACOUT and LCD analog output COM2.
5 RA3 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with ADC channel AN3, comparator C1 positive input, ADC positive voltage reference VREF+, LCD analog outputs COM3 (PIC16(L)F1936 only) and SEG15.
6 RA4 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with comparator C1 output, capacitive sensing input CPS6, Timer0 clock input T0CKI (Schmitt trigger), SR Latch non-inverting output SRQ, CCP5 (28-pin only) and LCD analog output SEG4.
7 RA5 bidirectional General purpose I/O (TTL input, CMOS output) multiplexed with ADC channel AN4, comparator C2 output, capacitive sensing input CPS7, SR Latch SRNQ, SS (Slave Select input), VCAP (PIC16F1936 only) and LCD analog output SEG5.
8 VSS power_in Ground reference.
9 RA7/OSC1/CLKIN/SEG2 bidirectional General purpose I/O (TTL input, CMOS output) that is also the OSC1 crystal/resonator connection (LP, XT, HS modes), the CLKIN external clock input (EC mode) and LCD analog output SEG2.
10 RA6 bidirectional General purpose I/O (TTL input, CMOS output) that is also the OSC2 crystal/resonator connection (LP, XT, HS modes), CLKOUT (FOSC/4 output), VCAP (PIC16F1936 only) and LCD analog output SEG1.
11 RC0/T1OSO/T1CKI/P2B bidirectional General purpose I/O (ST input, CMOS output) that is also the Timer1 oscillator connection T1OSO, Timer1 clock input T1CKI (Schmitt trigger) and PWM output P2B.
12 RC1/T1OSI/CCP2/P2A bidirectional General purpose I/O (ST input, CMOS output) that is also the Timer1 oscillator connection T1OSI, Capture/Compare/PWM2 (CCP2) and PWM output P2A.
13 RC2/CCP1/P1A/SEG3 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with Capture/Compare/PWM1 (CCP1), PWM output P1A and LCD analog output SEG3.
14 RC3/SCK/SCL/SEG6 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with SPI clock SCK (CMOS output), I2C clock SCL (open drain, I2C input levels) and LCD analog output SEG6.
15 RC4/SDI/SDA/T1G/SEG11 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with SPI data input SDI (Schmitt trigger), I2C data SDA (open drain), Timer1 gate input T1G and LCD analog output SEG11.
16 RC5/SDO/SEG10 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with SPI data output SDO (CMOS output) and LCD analog output SEG10.
17 RC6/TX/CK/CCP3/P3A/SEG9 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with EUSART asynchronous transmit TX, synchronous clock CK, Capture/Compare/PWM3 (CCP3), PWM output P3A (28-pin only) and LCD analog output SEG9.
18 RC7/RX/DT/P3B/SEG8 bidirectional General purpose I/O (ST input, CMOS output) multiplexed with EUSART asynchronous input RX, synchronous data DT, PWM output P3B and LCD analog output SEG8.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply.
21 RB0/AN12/CPS0/CCP4/SRI/INT/SEG0 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN12, capacitive sensing input CPS0, CCP4 (28-pin only), SR Latch input SRI, external interrupt INT (Schmitt trigger) and LCD analog output SEG0.
22 RB1/AN10/C12IN3-/CPS1/P1C/VLCD1 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN10, comparator C1/C2 negative input, capacitive sensing input CPS1, PWM output P1C (28-pin only) and LCD analog input VLCD1.
23 RB2/AN8/CPS2/P1B/VLCD2 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN8, capacitive sensing input CPS2, PWM output P1B (28-pin only) and LCD analog input VLCD2.
24 RB3/AN9/C12IN2-/CPS3/CCP2/P2A/VLCD3 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN9, comparator C1/C2 negative input, capacitive sensing input CPS3, CCP2 and PWM output P2A (both pin-selectable via APFCON), and LCD analog input VLCD3.
25 RB4/AN11/CPS4/P1D/COM0 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN11, capacitive sensing input CPS4, PWM output P1D (28-pin only) and LCD analog output COM0.
26 RB5 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also multiplexed with ADC channel AN13, capacitive sensing input CPS5, PWM outputs P2B and P3A, CCP3, Timer1 gate input T1G and LCD analog output COM1 (pin functions selectable via APFCON).
27 RB6/ICSPCLK/ICDCLK/SEG14 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also the ICSP serial programming clock ICSPCLK (Schmitt trigger), in-circuit debug clock ICDCLK and LCD analog output SEG14.
28 RB7/ICSPDAT/ICDDAT/SEG13 bidirectional General purpose I/O (TTL input, CMOS output) with individually controlled interrupt-on-change and individually enabled pull-up, also the ICSP data I/O ICSPDAT, in-circuit debug data I/O ICDDAT and LCD analog output SEG13.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 379
Storage temperature -65 150 °C 379
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 379
Voltage on VCAP pin with respect to VSS VCAP -0.3 4 V 379
Voltage on MCLR with respect to VSS MCLR -0.3 9 V 379
Voltage on all other pins with respect to VSS (max VDD + 0.3V) -0.3 V 379
Maximum current out of VSS pin, extended 105 mA -40°C ≤ TA ≤ +125°C for extended 379
Maximum current into VDD pin, extended 70 mA -40°C ≤ TA ≤ +125°C for extended 379
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 379
Maximum output current sunk by any I/O pin 25 mA 379
Maximum output current sourced by any I/O pin 25 mA 379
Operating temperature, extended TA -40 125 °C -40°C ≤ TA ≤ +125°C for extended 382
Supply voltage VDD VDD 1.8 5.5 V FOSC ≤ 16 MHz 382
Supply voltage VDD VDD 2.3 5.5 V FOSC ≤ 32 MHz (Note 2) 382
RAM data retention voltage VDR 1.7 V Device in Sleep mode 382
Fixed voltage reference voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed voltage reference voltage for comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed voltage reference voltage for LCD bias VLCDFVR -11 10 % 3.072V, VDD ≥ 3.6V 382
VDD rise rate to ensure internal power-on reset SVDD 0.05 V/ms See Section 6.1 Power-on Reset (POR) for details 382
Input leakage current, I/O ports, 85°C IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 85°C 389
Input leakage current, I/O ports, 125°C IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 125°C 389
Input leakage current, MCLR IIL -200 200 nA VSS ≤ VPIN ≤ VDD @ 85°C 389
Weak pull-up current, 3.3V IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 389
Weak pull-up current, 5.0V IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 389
Output low voltage, I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V 389
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 389
Capacitive loading, all I/O pins CIO 50 pF All I/O pins 389
Input low voltage, I/O port with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 389
Input low voltage, I/O port with SMBus levels VIL 0.8 V 2.7V ≤ VDD ≤ 5.5V 389
Input high voltage, I/O port with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 389
Input high voltage, I/O port with SMBus levels VIH 2.1 V 2.7V ≤ VDD ≤ 5.5V 389
Voltage on MCLR/VPP/RE3 pin during programming VIHH 8 9 V Note 3, Note 4 391
Supply current during programming IDDP 10 mA 391
Data EEPROM byte endurance ED 100 K E/W -40°C to +85°C 391
Erase/write cycle time, data EEPROM TDEW 4 5 ms 391
Program flash cell endurance EP 10 K E/W -40°C to +85°C (Note 1) 391
Self-timed write cycle time, program flash TIW 2 2.5 ms 391
External CLKIN frequency, EC high-power mode (min DC) FOSC 20 MHz EC Oscillator mode (high) 394
Oscillator frequency, XT mode FOSC 0.1 4 MHz XT Oscillator mode 394
Oscillator frequency, HS mode FOSC 1 20 MHz HS Oscillator mode, VDD > 2.7V 394
Oscillator frequency range for 4X PLL FOSC 4 8 MHz VDD = 2.7V to 5.5V 395
On-chip VCO system frequency FSYS 16 32 MHz VDD = 2.7V to 5.5V 395
CLKOUT stability (jitter) CLK -0.25 0.25 % VDD = 2.7V to 5.5V 395
Brown-out Reset voltage, BORV=2.5V VBOR 2.38 2.5 2.73 V BORV=2.5V 399
Brown-out Reset voltage, BORV=1.9V VBOR 1.8 1.9 2.11 V BORV=1.9V 399
ADC integral error EIL -1.7 1.7 LSb VREF = 3.0V 401
ADC offset error EOFF -2.5 2.5 LSb VREF = 3.0V 401
Comparator input offset voltage VIOFF -60 60 mV High-Power mode 403
Comparator response time, rising edge TRESP 400 800 ns High-Power mode 403
Cap sense current source, High ISRC -3 -8 -15 µA Current source High 410
Cap sense current source, Medium ISRC -0.8 -1.5 -3 µA Current source Medium 410
Cap sense current source, Low ISRC -0.1 -0.3 -0.4 µA Current source Low 410
Cap sense current sink, High ISNK 2.5 7.5 14 µA Current sink High 410
Cap sense current sink, Medium ISNK 0.6 1.5 2.9 µA Current sink Medium 410
Cap sense current sink, Low ISNK 0.1 0.25 0.6 µA Current sink Low 410
Thermal resistance junction to ambient, 28-pin SSOP θJA 90 °C/W 28-pin SSOP package 392
Thermal resistance junction to case, 28-pin SSOP θJC 24 °C/W 28-pin SSOP package 392
Maximum junction temperature TJMAX 150 °C 392

CAD (KiCad official)

  • Symbol: PIC16F1936-E
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f1936-e-etched.step / pic16f1936-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1936-e.step / pic16f1936-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (472 pp, sha256 9250c7993972a4aa, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF