component
TPA0253DGQR
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPA0253DGQR
Texas Instruments · Audio Amplifiers · HVSSOP-10-EP-0.5mm
TPA0253DGQR from Texas Instruments, in a HVSSOP-10-EP-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FILT_CAP | passive | Power supply filter capacitor terminal. |
| 2 | SHUTDOWN | input | Shutdown control input, TTL-compatible; logic high enables amplifier, logic low enters shutdown mode consuming 1 µA typical. |
| 3 | VDD | power_in | Positive power supply input pin, requires 2.5 V to 5.5 V for normal operation. |
| 4 | BYPASS | input | Midrail bias voltage reference terminal; connect 0.47 µF bypass capacitor to ground. |
| 5 | RIN | input | Right-channel audio input terminal with 50 kΩ input impedance (CMOS high-impedance input). |
| 6 | RO/MO+ | output | Right-channel audio output (stereo single-ended mode) or positive output (mono BTL mode). |
| 7 | ST/MN | input | Stereo/Mono mode selection input; logic high selects stereo SE mode, logic low selects mono BTL mode. |
| 8 | GND | power_in | Ground reference terminal for all device currents. |
| 9 | LIN | input | Left-channel audio input terminal with 50 kΩ input impedance (CMOS high-impedance input). |
| 10 | LO/MO- | output | Left-channel audio output (stereo single-ended mode) or negative output (mono BTL mode). |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-10-EP-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPA0253DGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: HVSSOP-10-EP-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tpa0253dgqr-etched.step/tpa0253dgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa0253dgqr.step/tpa0253dgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (13 pp, sha256
538bec49f58f624e, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).